Jump to content
HWBOT Community Forums

Recommended Posts

Posted
arazebe2.jpg

 

Thanks for the screen mate,i didn't know what subs make the difference :D .

How do you show in the screen what voltage was used ?

It is 1.857,maybe it can go lower...i didn't tested.

 

I can't read you screen any way to get a screenshot of it and upload?

 

As for displaying vdimm, use a multimeter and the read points as I know of no program to display vdimm on the Asrock. Your ram is definitely good and worthy of testing under LN2, looking forward to your results :)

Posted

I will upload later when i have internet on pc. The settings are identical as those in your screen. I'm still testing now the ram,after i will finish i will upload some screens :)

Something nice which i've obtained so far is same settings as in your screen but frequency at 2700 @1.89v. I need a good windows,my efficiency is a mess...

  • Administrators
Posted

Vdimm on Asrock can be shown with hwinfo32/64, on my Z87 it is VN4, which you have double, direct vdimm showoff doesn´t work - MM is ok as well, of course best option but hard to show with each test

  • Thanks 1
Posted

i'm done for tonight,i need a better so(this was for 3d :)) )and to learn proper wazaa.

 

~1.86v

 

attachment.php?attachmentid=2217&stc=1&d=1403911675

 

~1.89V

 

attachment.php?attachmentid=2218&stc=1&d=1403911729

 

My question is,a 4790k+z97 will allow me to go further in frequencies or latency ?

Or both ?

I want to know if to consider the investment....or this will suffice.

Thanks guys and apologies to bullant for highjacking the thread :D .

  • 3 weeks later...
Guest Bullant
Posted

Little update,haven't done much memory testing as late but here was a little testing i did with some lower binned memory with Asrocks Z97 OCF

CPU on water memory only -25 on single stage using EK adapter plate,great little plate for pre testing memory for cold scaling,volts .....

2200_pi.png

299x2.png

DSCN9511.jpg

DSCN9505.jpg

Guest Bullant
Posted
^ nice dont you love knowing you have the coating to protect you :)

 

Yes it's great

Guest Bullant
Posted (edited)

Some PSC efficiency testing I did a little while ago,cpu on water and memory on air

 

Ln2 results to come and the new Pentium that im looking forward to trying as Pentium imcs look awesome

 

Nick has done a great job on the board again,for those that are unsure on how to set bios up for 32M memory benching, Nick has a 32m air profile that sets the bios up for you,disabling all unwanted stuff in bios that you need to disable for 32m efficiency.

Also few things are enabled,once this is set its just a matter of selecting your memory profile for your ics and your away,quite easy for the people that are unsure of the tweaking as this gives them a head start

 

 

 

snaphsot0010.png

Edited by Bullant
Guest Bullant
Posted

Hey mate,voltage was 1.935v

also sent you pm

  • 2 weeks later...
Guest Bullant
Posted (edited)

Little Pentium test.bit of a trashed 3D OS as I couldn't be bothered setting up new OS,think their be bit more in efficiency if I ran on new OS.

 

Should produce a nice time on new OS,cold on CPU and full cold on the memory's

 

CPU on water and memory -10, 1.96v

 

r8iikj.png

Edited by Bullant
Guest Bullant
Posted

Some more Pentium stability testing with PSC,switched to different memory's and different CPU

Should have some LN2 soon to start testing cold

Memory's on air

 

i1be2o.jpg

ama7hh.png

  • 2 weeks later...
Guest Bullant
Posted

A cold memory session from last night

 

2hib4oi.png

nbdicp.png

 

This was one of the faster runs,im thinking 54.9xx on this on

357hfg2.png

2r2tc83.jpg

Guest Bullant
Posted

I'm only -160 ,I may have reached -170 before and haven't seen CB on any PSC I've tested

Guest Bullant
Posted (edited)

So I was have a chat with Splave just recently and he was kind enough to give me a few tips,thanks big guy.Anyway he was also saying to try my chip that has a wounded imc,so i did, I didn't get any passes tonight but it shows the board is quite impressive

 

 

 

316nf29.jpg

264huvr.jpg

 

5Ghz run OS was trashed board was pretty wet buy now,was loosing bit of efficiency

nyxlb7.jpg

 

scz2ma.jpg

Edited by Bullant
Guest Bullant
Posted

Testing one of two Pentiums I bought a little while ago,first time testing this cpu on cold and with cold memory's

 

This run was no waza

e0lll2.png

 

 

This run was with waza,will have to try a smaller waza later as i think the one I was using was a little to big

akijq8.png

 

 

Tried a 5Ghz run but by this time was getting little unstable,was looking ok thinking if this passed 56.3xx

33blhs7.png

Guest Bullant
Posted
bullant the master of not exact in round!!

 

crazy time for a pentium :D. 56.3xx.

 

they could be huge fun at 6.5 :<

 

Yeah think I need to sort out waza size,getting tired of this not exact round lol

 

Yeah one of these Pentium could be quite good 6.5-6.6Ghz

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...