Lays Posted September 6, 2015 Share Posted September 6, 2015 @GtiJason / @Bullant How do you guys get windows xp installed on the Z97 SOC Force from a USB drive? Quote Link to comment Share on other sites More sharing options...
Guest TheMadDutchDude Posted September 6, 2015 Share Posted September 6, 2015 Try a program called Yumi. Quote Link to comment Share on other sites More sharing options...
Lays Posted September 6, 2015 Share Posted September 6, 2015 (edited) Try a program called Yumi. Do you happen to know where I can get the ISO? I tried using the one on microsofts site, maybe I did something wrong but it kept telling me this message below after I used an ISO to USB tool. (When I tried to boot from USB) "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press Ctrl+Alt+Del to restart" Edited September 6, 2015 by Lays Quote Link to comment Share on other sites More sharing options...
GtiJason Posted September 6, 2015 Share Posted September 6, 2015 Do you happen to know where I can get the ISO? I tried using the one on microsofts site, maybe I did something wrong but it kept telling me this message below after I used an ISO to USB tool. (When I tried to boot from USB) "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system. Press Ctrl+Alt+Del to restart" yumi does work, and the os iso is from perica baril http://forum.hwbot.org/showthread.php?t=124735 Quote Link to comment Share on other sites More sharing options...
GtiJason Posted September 6, 2015 Share Posted September 6, 2015 got mei driver here http://www.overclock.net/t/1490835/the-gigabyte-z97x-overclocking-guide xp 32 bit works best, for 64 you need a driver streamlined into iso somehow, just use ide worse case burn a cd and use ide works everytime Quote Link to comment Share on other sites More sharing options...
Lays Posted September 6, 2015 Share Posted September 6, 2015 got mei driver here http://www.overclock.net/t/1490835/the-gigabyte-z97x-overclocking-guide xp 32 bit works best, for 64 you need a driver streamlined into iso somehow, just use ide worse case burn a cd and use ide works everytime I was installing an ISO w/ yumi, and I could of SWORN I clicked my 50gb partition I had left aside for XP, and it installed over my daily driver windows 8.1 install I am so sad I have to go re-install all of my daily driver stuff now lol Quote Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted September 7, 2015 Share Posted September 7, 2015 That's terrible Quote Link to comment Share on other sites More sharing options...
TASOS Posted October 12, 2015 Share Posted October 12, 2015 I used some program a guy on ocn told me to use, one sec I link u http://www.overclock.net/t/1490835/the-gigabyte-z97x-overclocking-guide/220#post_24097443 here's the post & directions, it worked for me to flash x04 on my second BIOS chip that had F7 on it. Thank that guy @OCN for me. Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 7, 2015 Share Posted November 7, 2015 (edited) Did some testing today on RTL/IO-L behavior with rising clock rates on Samsung, plus stable timings: 1448MHz 9-12-12 RTL 41-42-4-4 1466MHz 9-12-12 RTL 42-43-5-5 (41-42-4-4 trains but unstable, 42-43-4-4 fails with code 69/71) 1498MHz 9-13-13 RTL 42-43-5-5 (42-43-4-4 fails with code 69/71) 1535MHz 9-13-13 RTL 42-43-4-4 (took a while to get to IO-L 4 again!) 42-43-4-4 stops failing at 1520MHz, at 1525 Winboot starts being possible, at 1535MHz 32M will pass. Last stop, 1539Mhz 9-13-13 RTL 43-44-5-5 New 'setup' , Corsair H110 with Fusion pot taking care of mounting pressure Edited November 7, 2015 by aerotracks 1 Quote Link to comment Share on other sites More sharing options...
Lays Posted November 8, 2015 Share Posted November 8, 2015 (edited) Did some testing today on RTL/IO-L behavior with rising clock rates on Samsung, plus stable timings: 1448MHz 9-12-12 RTL 41-42-4-4 Where on earth did ya get that ram kit? Wow! What's the default xmp? 2666 c10? Edited November 8, 2015 by Lays Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 8, 2015 Share Posted November 8, 2015 Yep, XMP is 2666 10-12-12 Quote Link to comment Share on other sites More sharing options...
CL3P20 Posted November 14, 2015 Share Posted November 14, 2015 Nice results. *would be interesting to compare time with +1500mhz: CL10, tRDRD @ 5 and 'tRD triplets' @ 12 instead of 13..if training is possible Quote Link to comment Share on other sites More sharing options...
GtiJason Posted November 14, 2015 Share Posted November 14, 2015 Where on earth did ya get that ram kit? Wow! What's the default xmp? 2666 c10? Well the 2666c10 Dom Platts are the best ddr3 money can buy, add in a 2 dimm mem monster board and you've got a recipe for success Quote Link to comment Share on other sites More sharing options...
Lays Posted November 15, 2015 Share Posted November 15, 2015 (edited) Still testing some stuff, I know this is not superpi 32m, but I figured I'd take a screenshot of my timings and ask some questions. vdimm @ 2.15v, how much headroom do I have? I really want to see if I can get 2933 9-13-13 to run or something like that. I am unsure if I need to loosen RTL to get 2933 to work, I don't really know much about RTL and stuff like that. Also for some reason TWR is displaying as 18, but in BIOS I'm fairly sure I have it set to 10. (I'll go fiddle with this and see what's up) Edited November 15, 2015 by Lays Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 15, 2015 Share Posted November 15, 2015 At 2.15V there should be another 250mV head room if my math is not off - 2.4V is max you can set Quote Link to comment Share on other sites More sharing options...
GtiJason Posted November 15, 2015 Share Posted November 15, 2015 Still testing some stuff, I know this is not superpi 32m, but I figured I'd take a screenshot of my timings and ask some questions. vdimm @ 2.15v, how much headroom do I have? I really want to see if I can get 2933 9-13-13 to run or something like that. I am unsure if I need to loosen RTL to get 2933 to work, I don't really know much about RTL and stuff like that. Also for some reason TWR is displaying as 18, but in BIOS I'm fairly sure I have it set to 10. (I'll go fiddle with this and see what's up) Instead of trying something like 9-13-13-17, try 9-12-12 but you may have to raise tRAS up to 21-24 and or tREFI as high as 128. Actually here are perfect settings to start with and tighten from here. Rtl's probably wont get to 41-42 unless u have 2 dimm board or some cold aka -35C Quote Link to comment Share on other sites More sharing options...
Lays Posted November 15, 2015 Share Posted November 15, 2015 Instead of trying something like 9-13-13-17, try 9-12-12 but you may have to raise tRAS up to 21-24 and or tREFI as high as 128. Actually here are perfect settings to start with and tighten from here. Rtl's probably wont get to 41-42 unless u have 2 dimm board or some cold aka -35C I shouldn't need anywhere near those Sytem agent & IO volts I don't think, I am only using +0.125 for SA and AUTO for IOD/IOA, and 2860 was running fine I'll add more if I need though. I'll go and try all those settings shortly. Quote Link to comment Share on other sites More sharing options...
GtiJason Posted November 15, 2015 Share Posted November 15, 2015 I shouldn't need anywhere near those Sytem agent & IO volts I don't think, I am only using +0.125 for SA and AUTO for IOD/IOA, and 2860 was running fine I'll add more if I need though. I'll go and try all those settings shortly. I just quickly chose the nick shih 2933 preset and tightened mostly just the main timings. I set 2.25v cause I knew it would boot and left the rest auto. Those mems can run those timings at lower volts plus setting manually the sa and io volts does help. The pic was supposed to give you a starting point for timings as the rest varies. Oh and here on Earth, we say thank you Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 15, 2015 Share Posted November 15, 2015 Has anyone tried X04 BIOS + G3258 + Win10 32? It won't load, I'm stuck at the splash screen. With a 4790k Win10 loads without issues. I then switched to F1 version, G3258+Win10 is okay there, but no RTL control. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted November 15, 2015 Crew Share Posted November 15, 2015 isn't there like an X06/8 bios especially for the G3258 Quote Link to comment Share on other sites More sharing options...
Lays Posted November 15, 2015 Share Posted November 15, 2015 I just quickly chose the nick shih 2933 preset and tightened mostly just the main timings. I set 2.25v cause I knew it would boot and left the rest auto. Those mems can run those timings at lower volts plus setting manually the sa and io volts does help. The pic was supposed to give you a starting point for timings as the rest varies. Oh and here on Earth, we say thank you Thanks buddy It needed 2.287v from DMM to run R15 on realtime priority, got a pretty decent score increase (4 points extra vs 2864 mhz tight) But XTU refused to cooperate, even with 2.333v from DMM, I don't feel comfortable pushing any more volts, I don't have the other 2 sticks for the kit so I can't RMA. Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 16, 2015 Share Posted November 16, 2015 (edited) isn't there like an X06/8 bios especially for the G3258 Thanks man, will check that out. I've been having the worst issues with the board tonight. BCLK clocking was gone. Code 8 - power off - overclocking failed even at 100.08 BLCK, with both first and backup bios. Battery out and back in, re-entering Windows XP as well as Win10 "management engine" was recognized as new device. Of all bugs I've seen, this one is ranking pretty high in the category of strange @Lays: I wouldn't worry about XTU, relaxed RTL seem to kill any MHz gains at least on my crappy OS Edited November 16, 2015 by aerotracks Quote Link to comment Share on other sites More sharing options...
Lays Posted November 16, 2015 Share Posted November 16, 2015 Thanks man, will check that out. I've been having the worst issues with the board tonight. BCLK clocking was gone. Code 8 - power off - overclocking failed even at 100.08 BLCK, with both first and backup bios. Battery out and back in, re-entering Windows XP as well as Win10 "management engine" was recognized as new device. Of all bugs I've seen, this one is ranking pretty high in the category of strange @Lays: I wouldn't worry about XTU, relaxed RTL seem to kill any MHz gains at least on my crappy OS If you do find that BIOS, can you link it here? I been planning on buying a 3258 for some DICE fun. Quote Link to comment Share on other sites More sharing options...
aerotracks Posted November 16, 2015 Share Posted November 16, 2015 If you do find that BIOS, can you link it here? I been planning on buying a 3258 for some DICE fun. You can find these on tweak town: http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios-post275773.html#post275773 Quote Link to comment Share on other sites More sharing options...
Lays Posted November 16, 2015 Share Posted November 16, 2015 You can find these on tweak town:http://forums.tweaktown.com/gigabyte/28441-gigabyte-latest-beta-bios-post275773.html#post275773 link doesn't work for me What page is it on? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.