Skylake 6700K/6600K Batch and Serial Numbers

[Guest barbonenet]

Ahahah sorry

[Vivi]

more results:

 

#05121 L519C192 - 1.239 vid / 5ghz windows boot 1.39v / -177 6.3ghz cinebench R15 / 1.9v (CBB -175) (6.4 hwbotprime)

#04590 L519C192 - 1.280 vid / 5ghz windows boot 1.45v / -172 6.2ghz binebench R15 / 1.9v (CBB -168) (6.3 hwbotprime)

 

i have screens if anyone wants to see

[Guest TheMadDutchDude]

I saw what happened to your cracklake on FB, Vivi. Bad luck!

 

It makes me very cautious to try it on mine, aside from the fact that I need it for reviews.

[Vivi]

Dont worry i only killed my first chip that was bad anyway .

[Dancop]

Awake again?!?!?!

[Achill3uS]

lucky batch Vivi, i tested 4x L519C193 all was bunnyextraction no 5G boot below 1.50v

[Hazzan]

from my experience lower vid only help with high frek with lower vcore. most important is scalling even you have high vid on cpu. I have another cpu vid 1.168 but max out 6.2ghz on cinebench with any vcore and temp.

[Vivi]

yes need to find scaling first, then look for good vid in scaling batch

[nickolp1974]

L531B299 6700K (not delidded so flat as a pancake!)

5G @ 1.5v no boot (win8)

VID 1.263v

CB R15 4.5G 1.24v

 

gonna have a quick go on phase

Edited September 25, 2015 by nickolp1974

[DrWeez]

L519C192 - 1.280 vid / 5ghz windows boot 1.475v

[naruto80]

J have L527b204 and L527b291 any test for these?

 

Tomorrow quick test on h2o ;-)

[Guest barbonenet]

I ve got one of this from newzeland, and was very a s***t

[naruto80]

- L527B291 4,8ghz 1,45 cinebench/xtu 5ghz 1,47v superpi 32m

 

- L527B204 4,8ghz 1,35v cinebench/xtu 5ghz 1,44v superpi 32m

4,9ghz 1,44v cinebench/xtu

 

- L519C087 4,9ghz 1,44v cinebench/xtu 5ghz 1,44v superpi 32m

4,95ghz 1,44v xtu 101bclk

 

the best of these is L519C087, all CPU no Delid and H2o cooling with dual fan radiator, phobia's pump and EK waterblock

[Vivi]

i bought 2 cpu's my best cpu i found in this batch. Then i bought 10 more of the same batch, and find close cpus but still not better than my 1st purchase haha. It's better to rely on destiny/luck instead of odds .

 

data: lowest vid wins. scaling is linear. great batch

 

Maximus VIII Gene - 5ghz boot win7 tested.

 

I learned more tricks to get lower Cold bug so all bottom values will go up

 

12 x L519C192 tested

 

win7 64bit

#1 - 1.24 VID 5ghz 1.37 6.50ghz pifast -177 (6.30 cinebench) (6.40 hwbot prime)

#2 - 1.26 VID 5ghz 1.40 6.45ghz pifast -172 (6.25 cinebench) (6.35 hwbot prime)

#3 - 1.28 VID 5ghz 1.37 6.48ghz pifast -172 (6.27 cinebench) (6.37 hwbot prime)

#4 - 1.28 VID 5ghz 1.42 6.40ghz pifast -170 (6.20 cinebench) (6.30 hwbot prime)

#5 - 1.28 VID 5ghz 1.42 6.40ghz pifast -170 (6.20 cinebench) (6.30 hwbot prime)

#6 - 1.28 VID 5ghz 1.45 yes - not tested

#7 - 1.29 VID 5ghz 1.45v no - throw away

#8 - 1.31 VID 5ghz 1.45v no - throw away

#9 - 1.31 VID 5ghz 1.45v no - throw away

#10- 1.31 VID 5ghz 1.45v no - throw away

#11- 1.32 VID 5ghz 1.45v no - throw away

#12- 1.32 VID 5ghz 1.45v no - throw away

Edited September 27, 2015 by Vivi

[Behzad Tak]

6600K L521B643 VID 1.184v

no delid

Maximus VIII Gene & Corsair H110

4500 @ 1.26v CB11.5

4800 @ 1.42v CB11.5

5000 @ 1.5v no boot

 

------------------------------------------

 

6600K L524B307 VID 1.152v

no delid

Maximus VIII Gene & Corsair H110

 

4500 @ 1.130v CB11.5

4800 @ 1.265v CB11.5 & 1.28V XTU

5000 @ 1.365v HWBOT Prime

5100 @ 1.46v HWBOT Prime

 

 

http://img.techpowerup.org/150927/4500-1-13v-cb.jpg

http://img.techpowerup.org/150927/4800-1-28v-xtu.jpg

http://img.techpowerup.org/150927/5000-1-365-hwbp.jpg

 

Edited September 28, 2015 by Behzad Tak

[Doug2507]

Few 6700k's turned up today, should get them checked on a water loop today / tomorrow (will post once done) and cold next week. (1st time freezing! )

 

L328B167 x2

L329B200 x1

L332B112 x2

 

From what i can gather they really need a delid to fully test on LN2. Would testing them before this still give a good indication of potential or will i be thermally limited way to early to tell? Not sure i want to delid every chip but i guess delid/paste/seal will be beneficial for new owners anyway...

Edited October 2, 2015 by Doug2507

[Vivi]

Few 6700k's turned up today, should get them checked on a water loop today / tomorrow (will post once done) and cold next week. (1st time freezing! )

 

L328B x2

L329B200 x1

L332B x2

 

From what i can gather they really need a delid to fully test on LN2. Would testing them before this still give a good indication of potential or will i be thermally limited way to early to tell? Not sure i want to delid every chip but i guess delid/paste/seal will be beneficial for new owners anyway...

 

its tough to check performance without delidding on ln2. Even using 2 cores only you might be 300mhz off the real max!

 

cool man give us some vids and 5ghz results on water

[nickolp1974]

its tough to check performance without delidding on ln2. Even using 2 cores only you might be 300mhz off the real max!

 

cool man give us some vids and 5ghz results on water

 

^this

 

I thought my chip was gonna be crap as it wouldn't boot 5ghz under water but after a delid and ln2 i'm close to 6.2ghz and i dont think its finished yet as i havn't maxed out temps or voltage yet.

[Dancop]

If it scales it scales and when it dies it dies

[Doug2507]

Haha, true. That's got to be a sig. quote surely!

Edited October 2, 2015 by Doug2507

[Dancop]

Copyright by stummerwinter!

It was my second ln2 session and he told me that!

[Guest Sinebrychof]

Luumi

 

First touch on skylake!

 

L526B899 Batch 6700k. No delid yet.

 

VID 1.21v

 

Lowest I managed to boot into win 7 at 5g was 1.38v measured from multimeter.

 

5ghz Hwbot prime 1.39v on water

 

 

4.8 cache went easy at 1.38v, still need to test more.

Edited October 4, 2015 by Sinebrychof

[Rauf]

Luumi

 

First touch on skylake!

 

L526B899 Batch 6700k. No delid yet.

 

VID 1.21v

 

5ghz Hwbot prime 1.39v

I got one of the same batch. Have tested 8 6700K so far. When I tested mine it seemed to scale very much with temperature and not so much with volts. My feeling is that it might be good. Bought two more after that one but they were bad

 

Haven't tested on LN2 yet but my best L526B899 does 5GHz HWBOT Prime at 1.38V. 4.9GHz at 1.31V. Boot windows 7 5GHz at 1.39V. Not delidded yet.

[Guest Sinebrychof]

I just bought one .

 

Do other settings than vcore help with core? What is the cpu audity or whatever it is called do? Setting ranges from 700mV to 1000mV.

[Rauf]

Don't have audity on my MB. There are many voltages that help or may help with different things such as CB, CBB or of course frequency and memory. I don't think anyone has the whole picture just yet. You still have to try everything out. But a good start is the ASUS and the MSI guides.