January 2, 20178 yr I download 3101 bios for my M8H and works fine. Only in XP there isn't USB support. How can we do ?
January 3, 20178 yr Work fine? Also memory run with 1T without problem? With impact i have big memory problem and not run 4000 12 12 28 1T ......
January 6, 20178 yr Work fine? Also memory run with 1T without problem? With impact i have big memory problem and not run 4000 12 12 28 1T ...... Unfortunately, it is not only Impact VIII affected ( negatively ). I also had severe issues with Maximus VIII Extreme. All problems have to do with memory. Flashed back to 2202 and I am up and running normally again.
January 7, 20178 yr Unfortunately, it is not only Impact VIII affected ( negatively ). I also had severe issues with Maximus VIII Extreme.All problems have to do with memory. Flashed back to 2202 and I am up and running normally again. So flash to 2202 fixed it? I have memory problem too on my Gene on 3007 BIOS with 7700K, very hard to boot above 3733 1T Tight, always give 55.
January 7, 20178 yr So flash to 2202 fixed it? I have memory problem too on my Gene on 3007 BIOS with 7700K, very hard to boot above 3733 1T Tight, always give 55. Absolutely. All memory timings returned to normal. 3866 / 12-12-12-28-1T on M8E and 4000-4133 / 12-12-12-28-1T on Impact. 2202 bios. Any update screws mem timings.
January 7, 20178 yr Ok so i see for the Impact BIOS 2202 seems the best for kaby lake, but can we use these KL BIOS for extreme OC on i7-7700k??
January 7, 20178 yr Absolutely. All memory timings returned to normal. 3866 / 12-12-12-28-1T on M8E and 4000-4133 / 12-12-12-28-1T on Impact. 2202 bios. Any update screws mem timings. Thanks! After change the bios it clocking normal again
January 7, 20178 yr Absolutely. All memory timings returned to normal. 3866 / 12-12-12-28-1T on M8E and 4000-4133 / 12-12-12-28-1T on Impact. 2202 bios. Any update screws mem timings. Thanks you. After change to 2202 bios,my M8G can boot 4000c13 1t again.
January 8, 20178 yr FYI i tried again, very hard to get 32m working above 3830, maybe its time to change Z270
January 9, 20178 yr These bioses should work well, can you guys verify? Maximus VIII Extreme 3201 Maximus VIII Formula 3201 Maximus VIII Gene 3201 Maximus VIII Hero Alpha 3201 Maximus VIII Hero 3201 Maximus VIII Impact 3201 Edited January 14, 20178 yr by elmor
January 9, 20178 yr These bioses should work well, can you guys verify? Maximus VIII Extreme 3201 Maximus VIII Formula 3201 Maximus VIII Gene 3201 Maximus VIII Hero Alpha 3201 Maximus VIII Hero 3201 Maximus VIII Impact 3201 Works well! (see attached screen...)
January 9, 20178 yr These bioses should work well, can you guys verify? Maximus VIII Extreme 3201 Maximus VIII Formula 3201 Maximus VIII Gene 3201 Maximus VIII Hero Alpha 3201 Maximus VIII Hero 3201 Maximus VIII Impact 3201 Thanks! So far it working good, within margin error with my Skylake 5G. Only sometimes when booting it stuck on 22.
January 9, 20178 yr Tested on M8E. Still 2202 works better for me. 3866 -12-12-12-28-1T / tight not possible with new bios. Whatever VccIO-VccSA and Vmem I apply. Barely 13-13. M8I can't tell. Currently for RMA. I will stick to 2202.
January 10, 20178 yr Thanks! So far it working good, within margin error with my Skylake 5G. Only sometimes when booting it stuck on 22. What if you wait 30-60s?
January 10, 20178 yr What if you wait 30-60s? Still 22 Edited (forgot to add something) : Sometimes before 22 post code 49 (49 too after 30-60s). Edited January 10, 20178 yr by speed.fastest
January 13, 20178 yr There ist no Maximus VIII Hero Bios Link goes to Hero Alpha Maximus VIII Extreme 3201 Maximus VIII Formula 3201 Maximus VIII Gene 3201 Maximus VIII Hero Alpha 3201 Maximus VIII Hero 3201 Maximus VIII Impact 3201
January 14, 20178 yr There ist no Maximus VIII Hero Bios Link goes to Hero Alpha Maximus VIII Extreme 3201 Maximus VIII Formula 3201 Maximus VIII Gene 3201 Maximus VIII Hero Alpha 3201 Maximus VIII Hero 3201 Maximus VIII Impact 3201 Link updated.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.