April 21, 20169 yr Started testing i3 6300 ES chips first one up seems pretty decent. Full pot no problem and retail memory from the egg (4000 c12 32M stable max on this kit) worked well with the Z170M OCF. R15 R11.5 Geek
April 23, 20169 yr Was playing with some settings the other night "TRDWRs" @1,need to test more on few different benches,welcome to try,may or may not help @ all but interesting .They run it at 4000Mhz mem too
April 23, 20169 yr Well cool then! Question... anyone had issues installing Timing Configurator in stripped XP? Can't get it to go for some reason. v4.0.3
April 23, 20169 yr Well cool then! Question... anyone had issues installing Timing Configurator in stripped XP? Can't get it to go for some reason. v4.0.3 Has been ok for me
April 23, 20169 yr I'm trying to get this Score, too.. but it will not happen. I think it isn't a Timing Issue.. Most time i get 738-740. Once i got a 741.. but after exporting file, i can't upload it.. getting an error.
April 25, 20169 yr When i remember right, the System freezed with 49/50/7/6 when booting with BCLK 100 and pushing with FD up to 102.9. Don't have spend much time in training for RTLs. I'll check that soon, cause i want that 742 Score.
June 12, 20168 yr Taking a quick break from 742, not even my hardly used monster B die helping. Back in the vault you go before RT snatches em up while I'm passed out behind the XTU wheel. Pretty much as tight as B die allows still 741 Edited June 12, 20168 yr by GtiJason
June 12, 20168 yr Taking a quick break from 742, not even my hardly used monster B die helping. Back in the vault you go before RT snatches em up while I'm passed out behind the XTU wheel. Pretty much as tight as B die allows still 741 Same here! LE: Done it! W8.1 build 9600 seems to have done the trick in my case! Now I can go back and live my life! Edited June 12, 20168 yr by BoTSkill
June 23, 20168 yr Guys, I got my first B-die [TridentZ 3600CL16]. but I can't run CR 1T on my OCF with dividers 3733 and above. Mems are capable of 2000 12-12, even 12-11, and they do it very tight, but I am forced to go 2T. Any hints? I tried bioses 1.92, 1.93a and 2.03. What happens is during memory training it goes from 40 to 00->19->00->19->00 and safe boot triggers. I tried raising vccsa and vccio, I ran them on auto, raised PCH to 1.1, but still no success.
June 23, 20168 yr It may be the board, it's quite difficult to run it at high frequencies and use 1T, I believe. I'd have thought it would be okay for 3866 or thereabouts, but maybe your IMC is limiting you here more so than the board/RAM. What have you got your VCCSA and VCCIO set to? I didn't need more than 1.2v and 1.1v respectively for 3840 12-12-28-1T (XTU runs).
June 23, 20168 yr It may be the board, it's quite difficult to run it at high frequencies and use 1T, I believe. I'd have thought it would be okay for 3866 or thereabouts, but maybe your IMC is limiting you here more so than the board/RAM. What have you got your VCCSA and VCCIO set to? I didn't need more than 1.2v and 1.1v respectively for 3840 12-12-28-1T (XTU runs). I previously used gene VIII, I can run CR 1 over 3600, I am setting vio 1.3 and 1.35 VSA same result, can't be run on CR 1
June 23, 20168 yr yeay, I successfully use CR 1 at 3866Mhz VDIM 1.81v VSA 1,160 1,150 Vio Hint: secondary and ternary should be set manually
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.