Jump to content
HWBOT Community Forums

DDR4 Geil 4000 c19-25-25-45 (samsung-b)


RULE

Recommended Posts

Hi all, just the other day after team.au aquamark submission i've discovered the existing of samsunb-b die. Searching in EU shop i've found a kit with not much information on the web, Geil Dragon PC4-32000 4000 cl19-25-25-45 1.4v 2x8GB KIT (GWW416GB4000C19DC).

Even on Geil official website there's nothing about this kit, but since all the DDR4 Dragon I've seen was single side and this kit was 2x8GB i've try to purchase with the hope to find Sumsung-b die. Lucky me it is.

 

kVovAdll.jpg

 

eAmx77A.jpg

 

q1nhhgel.jpg

 

7EcuKgil.jpg

 

So i see the the Loud Silence 32M of yesterday on Z170M OCF, my Big Yellow is on the way home after RMA, the MOCF is not available yet in EU, so i've run some XTU on Asus Z170 Gene. Nothing against Asus, i just prefer the Yellow Board.

 

 

Starting from here @ 1,70v

 

kpPVlVhl.png

 

Here @ 1,80V

 

JcXpFgWl.png

 

Again @ 1,80v very thight

 

9mRToh9l.png

 

1900 @ 1,85v very thight

 

yfL7x6Il.png

 

 

There's more in this kit, tomorrow i'll try some cold.

  • Like 1
Link to comment
Share on other sites

I am not sure if we will be able to clock 4DIMM as high as 2 DIMMs.

 

32GB is a lot of memory & will be hard on the IMC.

 

 

Thank you for your tests.

 

 

32GB good on big OCF, at least for 3700 12-12-12 but it needs 2T, so on Asus they should go much higher and no problem with 1T as the layout is better optimized for 4 dimm operation.

 

Little board, well we know they work quite well on it :D

Link to comment
Share on other sites

32GB good on big OCF, at least for 3700 12-12-12 but it needs 2T, so on Asus they should go much higher and no problem with 1T as the layout is better optimized for 4 dimm operation.

 

Little board, well we know they work quite well on it :D

Thanks for the info man.

Still even on Asus, I think 4 DIMM maxes out around 3800.

 

So the question is what's faster 2DIMMs at 4000Mhz+ or 4DIMMs around 3800Mhz. Should be close.

 

Then there's also the mystery of DS.

Link to comment
Share on other sites

Guest george.kokovinis

Folks,

 

If my questions are stupid, please do not throw rocks or anything else:D

 

1) Would four of these single sided B-die sticks work correctly on X99

platform as quad channel setup ? ( Asus RVE )

2) How much safe voltage tolerance is there for ram sticks and IMC on X99 ?

 

I am currently running G.Skill Ripjaws 4 - 3200, 4x4gb, 13-14-16-16-270-1T with 1.55V and never had an issue.

 

Would such an expensive 700 Euros upgrade ( if applicable ) offer noticeable

improvements ?

 

Thanks for any feedback folks:)

Link to comment
Share on other sites

Guest george.kokovinis
nope George it won't

 

 

THANK YOU VERY MUCH !

Appreciated.

I thought that the answer would be negative - just a long shot.

 

I will go with the new G.Skill 3666, recently introduced for X99.

If I can find them:(

Link to comment
Share on other sites

Guest george.kokovinis
It might bring a minuscule extra for benching, but not worthwhile the extra cost man... some stuff is just over-rated... Faster memory speed is not always better

 

Oh... Well don't waste money on those man, yhey have same ic as lower models like 3200 3466 and 3600 fot skylake....

 

Sent from my SM-N910F using Tapatalk

 

Always nice to have some wise advice from experts.

 

Thank you both so much. I will stay put.:)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...