Jump to content

Featured Replies

  • Replies 298
  • Views 99.1k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • OC Panel II firmware works on OC Panel I

  • I.nfraR.ed
    I.nfraR.ed

    Currently, we don't have control over any memory timings, except the main 5. AMD's AGESA code provides "tables" with different sets of timings depending on the divider used. Whenever you use e.g. 26

  • My board has succumbed to the all vendor issue of losing a dimm channel. Swapped various hardware still single channel....maybe i can set a useless memory oc record in single channel now. Otherwise i

Thanks, zeneffect. No need to make any hardware changes; just knowing you had three or more slots in use is enough to indicate that maybe my board is bad. If so it's a weird one, affecting all except the two main PCIEe slots... but I guess it could be.

i can't go into the bios . i try 081 and 083 bios same problem .... have you got this problem ?

But it is bad under cold

 

Envoyé de mon SM-G920F en utilisant Tapatalk

I think, noone tested this bteas under cold. But at air, it has better performance than previous BIOSes :)

Where can i download the Betas?

 

(32gb ram)

I dont know exactly, but its it in this thread :) (between pages 1600 to 1900)

ROG Crosshair VI overclocking thread - Page 2063

 

Originally Posted by elmor go_quote.gif

 

AGESA 1006 RC4 official BIOS 1401

 

Just tested quickly 3600 memory and cold booting, seems good but you guys are going to have to help me test this before we have a judgement. Seems CPU temp reading from SIO now has -20*C offset for XFR enabled CPUs.

 

Here we go!

My board has succumbed to the all vendor issue of losing a dimm channel. Swapped various hardware still single channel....maybe i can set a useless memory oc record in single channel now. Otherwise i have a brick.

hi i have a problem with my board : i can't go into the bios . it's always freez . cmos change nothing .

 

have you got an idea please ?

Aircooling i Will try thanks

 

Envoyé de mon SM-G920F en utilisant Tapatalk

I have problem with latest bios 1702. I think performance level is bad for me in wprime. CPU clock is good, ram is tight and high freq, but bas performance level.

I have problem with latest bios 1702. I think performance level is bad for me in wprime. CPU clock is good, ram is tight and high freq, but bas performance level.

 

Yup, can confirm. I'm behind guys with ~100mhz less CPU clock.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...