wutske Posted December 7, 2023 Share Posted December 7, 2023 On 12/5/2023 at 9:56 PM, Leeghoofd said: @wutske Probably a hardware mismatch on our side, pinged the programmer to check Can you also do an X265 1080P plz ? thx Have another CPU in the bench right now, I'll probably swap the E6550 back in tomorrow. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted December 7, 2023 Author Crew Share Posted December 7, 2023 1 hour ago, wutske said: Have another CPU in the bench right now, I'll probably swap the E6550 back in tomorrow. It should be working properly now Quote Link to comment Share on other sites More sharing options...
TAB_2 Posted December 23, 2023 Share Posted December 23, 2023 Trying to submit to HWBot and I get this error. Tried switching between my username and email as a login. Firewall is not blocking. Submission thread running: 0x00000000000009F8 New submission update status: Connecting to hwbot.org (5%) Could not connect to HWBOT for user authentication: SSL connect error Authentication failed with error: Connection error => SSL connect error Submission update error: Could not authenticate with hwbot.org! Error:Connection error => SSL connect error How do I get my submissiong through? Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted December 23, 2023 Author Crew Share Posted December 23, 2023 21 minutes ago, TAB_2 said: Trying to submit to HWBot and I get this error. Tried switching between my username and email as a login. Firewall is not blocking. How do I get my submissiong through? Did you try to sub manually ? Via the Submit score and afterwards selecting the benchmark at HWBOT page ? Quote Link to comment Share on other sites More sharing options...
TAB_2 Posted December 23, 2023 Share Posted December 23, 2023 I can submit manually, but I would prefer through the BenchMate. Is there any idea on what the error might be? Is there maybe some problem with my SSL certificates? Quote Link to comment Share on other sites More sharing options...
_mat_ Posted December 23, 2023 Share Posted December 23, 2023 (edited) Yes, there is a problem with the hwbot certificate on your system. It has a fairly new root or intermediate certificate from their certificate provider, iirc. Normally this happens if the bench os has not been updated in a long time, or hasn't had an internet connection in a while. Many certificates in the Windows certificate store won't be valid anymore and that breaks the certificate chains. The easiest way is to update. I tried to solve it in the manual BenchMate installation but failed to fix it. I will try again soon. Easiest way to fix this is to install updates. Edited December 23, 2023 by _mat_ Quote Link to comment Share on other sites More sharing options...
wutske Posted December 25, 2023 Share Posted December 25, 2023 (edited) On 12/23/2023 at 10:55 PM, TAB_2 said: I can submit manually, but I would prefer through the BenchMate. Is there any idea on what the error might be? Is there maybe some problem with my SSL certificates? Definately broken om W7. You can also just copy paste the results folder to another system which is up to date Edited December 25, 2023 by wutske Typing is hard Quote Link to comment Share on other sites More sharing options...
Broken APEX49 Posted February 4 Share Posted February 4 R23 on the cinebench I want to cancel a continuous test Quote Link to comment Share on other sites More sharing options...
NATA 58 Posted February 15 Share Posted February 15 On 7/14/2023 at 6:27 PM, _mat_ said: FYI: New BenchMate 11 Beta version is ready, but it will take 3 to 5 business days to release it. Microsoft has added a mandatory additional account verification to sign drivers and is now vetting my business. As soon as that's done it will be available for download. This is the changelog for the new version: Benchmarks - GPUPI - You can finally bench AMD RX 6x00 series graphics cards and hopefully RX 7x00 cards as well. The Reduction Size needs to be set to 256, because these cards have limited shared memory available. - GPUPI for CPU now works with Intel OpenCL 3.0 runtime. It's the latest runtime that can be downloaded without registration: https://www.intel.com/content/www/us/en/developer/articles/technical/intel-cpu-runtime-for-opencl-applications-with-sycl-support.html - Added multiple tweak options: - OpenCL Math Optimizations: Disabled, Safe, Unsafe, Fast - if you encounter a precision error, the OpenCL runtime does not work with that level of optimization. - Intel OpenCL Vectorizer: Enabled (Default), Disabled - gives you control over the automatic loop vectorization for CPUs (you will be surprised that Intel's default is actually slower) - Intel OpenCL Vectorizer Mode - fine-grained control of the width for the vectorization, if enabled - Intel OpenCL Instruction Set: Auto (Default), SSE4.2, AVX, AVX2, AVX512 - Auto will set the highest possible set, be sure to select Auto or at least AVX if you have enabled the Vectorizer - Intel OpenCL Loop Unroll Factor - higher value might be better - CINEBENCH R20/R23 - BenchMate now hooks the underlying Intel Embree raytracing framework for better error detection. If the raytracing workload reports an error, the run will correctly be flagged as invalid. This fixes the long-time CB bug that shows very high scores when the workload was not completely rendered due to an error (mostly because of a maxmem setting). - Added new options to apply a selected Instruction Set Architecture (ISA) and the Frequency Level. This allows to make use of a specific instruction set like AVX, SSE 4.2 etc. - BenchMate's internal run measurement now starts closer to the workload for better average measurements (ie: wattage) - Added an option for a run confirmation dialog like in Super PI - Improved anti-tampering support by verifying all loaded plugin dlls - y-cruncher - Support for version 0.8.1 - Added thread count to CLI wrapper options: All Threads (BenchMate), All Threads (y-cruncher), 1 Thread. It defaults to BenchMate's thread count detection to utilize all threads. This automatically fixes a y-cruncher bug that detects 48 threads on 7900X resulting in slower runs. This might affect other AM5 CPUs as well (not the 7950X though). - Experimental bugfix for several warnings that need user input to continue - Super PI now validates the number of loops that are calculated - Added AMD Unsafe tweaks for Vermeer to wPrime and all CINEBENCH versions Features & Improvements - Improved installer speed - Added new result dialog theme: Noctua - Various visual improvements for result dialogs - Improved text readability by using Lato as list text font - Added validation/warning icons for detected CPU name and bus-dependent frequencies - Added black icon set for ASRock AQUA and Noctua theme - Improved rendering of benchmark names - Improved rendering of Options/Tweaks by using multiple lines, if necessary - Added SMBIOS support to improve security with spoofing of CPUID brand strings. If data from CPUID and SMBIOS is different, both will be displayed in the result dialog to help with moderation. - Added CPU architecture and CPUID family, model and stepping to result dialog to help with the identification of CPUs - Using SMBIOS to supply full core and thread count on CPUs with disabled cores - Implemented new NUMA Windows API to support new multi-group node-affinity of Sapphire Rapids (Windows 11 only) - Improved error message for HWBOT uploads that respond with HTTP error code 403 due to the CPU or GPU missing in the HWBOT Submission API database - Removed F7 hotkey (flush cache) in favor of CPU-Z's hotkey to save a validation file - Improved detection of unknown Windows 10 and 11 versions - Updated HWiNFO to version 7.51 (fixes Command Rate detection on AM5, improved support for RTX 40x0 GPUs, ...) - Updated tools: HWiNFO 7.50, CPU-Z 2.0.6, GPU-Z 2.54 Internal changes - Added support to detect AMD Meltdown/Spectre mitigation flags and log them to client.log (or the Debug Console in BenchMate). This will be useful in an upcoming version of BenchMate. - Improved detection of CPU models higher than Skylake to determine if QPC/LAPIC timer is a safe option - Detect Hygon Dhyana as Zen-based CPU Bugfixes - Fixed bug with missing cpu short names of Ryzen ES CPUs in the result list - Fixed GPUPI frozen on startup with Korean language setting (thx safedisk) - Fixed detection of Windows Server 2022 opencl 2023 is no longer available. where can I find the link Quote Link to comment Share on other sites More sharing options...
NATA 58 Posted February 15 Share Posted February 15 opencl 2023 is no longer available. where can I find the link Quote Link to comment Share on other sites More sharing options...
Papusan Posted February 15 Share Posted February 15 3 hours ago, NATA 58 said: opencl 2023 is no longer available. where can I find the link Here. From me. https://www.mediafire.com/file/k5kzzjg9zonv5d4/w_opencl_runtime_p_2023.1.0.46319.exe.7z/file 2 Quote Link to comment Share on other sites More sharing options...
NATA 58 Posted February 15 Share Posted February 15 A thousand thanks 1 Quote Link to comment Share on other sites More sharing options...
NATA 58 Posted February 18 Share Posted February 18 (edited) error Edited February 18 by NATA 58 error Quote Link to comment Share on other sites More sharing options...
wutske Posted February 18 Share Posted February 18 (edited) Will there also be a manual version of the beta available ? //edit: Damn I'm not awake yet Edited February 18 by wutske Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 22 Author Crew Share Posted March 22 Benchmate Patch For 14900KS Copy the 2 DLLs inside the archive into the BM Path\bin Folder https://drive.google.com/file/d/18gZXsfSFqpH4oLm02TNBkC3U2h8g7egU/view?usp=sharing BM_773.7z Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.