Jump to content

Featured Replies

  • Replies 278
  • Views 104.3k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Hi! My G-drive backup   https://drive.google.com/drive/folders/1F-3Y7miM60VjP8Lu_Q2yStClXLLg0nn5?usp=sharing  

  • Here you go: 460hawk_coldslow_hwbot.rom

Awesome. What mods did you need? I see that it has Voltera and I can raise it in AB. A few people have said it should not need more than ~1.40V, but I've seen mentions of OVP and OCP but I can't find these mods anywhere.

  • Author

Haha, pretty sure I made that Vmod picture. I recognise my very poor style of adding description text on the picture :D.

Haha, pretty sure I made that Vmod picture. I recognise my very poor style of adding description text on the picture :D.

 

Could be :D Saved it few years ago.

 

 

Do you think they'll clock well without the OCP mod? I messed up the first one (removed a tiny SMD resistor and can't solder it back).

 

Happened to me aswell and had no influence on the result. Was a GTX260 tho.

I fan into Mem CB hard. First test was run at about -90°C and all worked well. The second run gave me a colored screen at the very end of nature. After that, I had tons of issues.

 

What does OCP/OVP look like in these cards? Jut an immediate cut off or something else?

I have Leadtek GTX280 - no CBB/CB and no OCP/OVP issues up to 1.70V@1080.

But it have a memory coldbug issue, so I have to downclock memory from 1300 (air/water) to 1150-1200 (LN2 -180C).

No mods, Vgpu was controlled via RivaTuner.

Edited by mtech

Hey guys,

 

I have an GTX580 DCII

Is there any possibility to get more than 1.21V on the card?

Maybe any version of Afterburner?

 

Thanks and best regards

Daniel

I have an Problem, i flashed today an Cold Slow Bios for my GTX580 Ref PCB.After that, the output on the monitor is destroyed. Flashing back an Original Bios doesnt help at all:( In Windows GPU-Z shows 0 MHz on Core, Shader and Mem and no Ram size:( An help would be nice:)

Hey guys,

 

I have an GTX580 DCII

Is there any possibility to get more than 1.21V on the card?

Maybe any version of Afterburner?

 

Thanks and best regards

Daniel

 

I used Smart Doctor with "overclocking range enhancement" (or whatever it's called) and had no problems :)

 

 

Moose.... sorry, I can't think of anything to help :(

I have an Problem, i flashed today an Cold Slow Bios for my GTX580 Ref PCB.After that, the output on the monitor is destroyed. Flashing back an Original Bios doesnt help at all:( In Windows GPU-Z shows 0 MHz on Core, Shader and Mem and no Ram size:( An help would be nice:)

 

Bump for that.

Umh! Please could you post the coldslow modded bioses (if any, in a near future...) here quickly for MSI GTX 560Ti 448cores PEOC and MSI HD7790 :)

 

Thanks

Umh! Please could you post the coldslow modded bioses (if any, in a near future...) here quickly for MSI GTX 560Ti 448cores PEOC and MSI HD7790 :)

 

Thanks

 

What, you don't like the 560 ti 448 coldbug of ~-60? :D

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...