Jump to content

Featured Replies

  • Author

No thnx:) Will have to see what will be safe temps etc. Did notice something in the Gene V bios about max temperature. You can raise it from 130 to 151..?

  • Author

By the way, this is on cheap watercooling with 1x120MM rad. So temps can drop with better cooling, but if this remains the retail there is no 5ghz for 24/7..

By the way, this is on cheap watercooling with 1x120MM rad. So temps can drop with better cooling, but if this remains the retail there is no 5ghz for 24/7..

 

no, temps will not drop ... its Ivy :)

  • Author

Yea, but just to point out it can be +- a few degrees lower ;). But yea, you are right. Keep your SB if it is a good clocker for 24/7. Since I have no way to test with cold i'm almost done.. It is nice to see 2700mhz mem tho..

does someone want to take a look at IMC of E0 VS E1?
Got a couple of 3570k...E0 2850 max cold/air 4X4 and 3000+ 2x4 cold, E1 2850+ 4X4 so far on air

Edited by dumo

Got a 3570K from the same shop yesterday, quick test under SS gave me 5.5 GHz, pot is mounted now going to test it under cold today.

IMC not yet important - 6.6+ retail 1.9V LN2 -> GO FOR IT!

8-11-8 or so is ok...everyone is struggeling here and there...much to learn on IVY!

 

IMC's pretty important imho. Ivy only starts flying when you're at DDR3-2600+ or so.

IMC not yet important - 6.6+ retail 1.9V LN2 -> GO FOR IT!

8-11-8 or so is ok...everyone is struggeling here and there...much to learn on IVY!

 

You need one hell of a LN2 contract to learn on Ivy ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...