Ivy 3570K (retail) for sale

[rsnubje]

What you waiting for, bench that bitch

[wesjuhdabomb]

http://hwbot.org/submission/2273961_

1333 mhz ram in 5 minutes.. Just easy

 

Also 4.9 seems to be stable on water, 5ghz needs more voltage (1.44 for 4.9, 5 needs 1.48+ which results in to much heat.)

Ran a cinebench 11.5 on 4.9 and 3dmark06 CPU score

[l0ud_sil3nc3]

nice results wes.

[OBR]

show us linx or prime at that voltage

[wesjuhdabomb]

No thnx:) Will have to see what will be safe temps etc. Did notice something in the Gene V bios about max temperature. You can raise it from 130 to 151..?

[wesjuhdabomb]

By the way, this is on cheap watercooling with 1x120MM rad. So temps can drop with better cooling, but if this remains the retail there is no 5ghz for 24/7..

[OBR]

By the way, this is on cheap watercooling with 1x120MM rad. So temps can drop with better cooling, but if this remains the retail there is no 5ghz for 24/7..

 

no, temps will not drop ... its Ivy

[wesjuhdabomb]

Yea, but just to point out it can be +- a few degrees lower . But yea, you are right. Keep your SB if it is a good clocker for 24/7. Since I have no way to test with cold i'm almost done.. It is nice to see 2700mhz mem tho..

[Viss]

[Gamer]

I do hope that's a cascade

[Andrix85]

 

Have you a SS or CASCADE? If is a SS can you make some test of oc max frequency ? Thanks

[Viss]

SS Chip wil do ~5500mhz under phase and ~6400mhz @ 1.85v with LN2

[SoF]

any countries were retails have not been widely spread yet?

[just_nuke_em]

USA. Looks like we get em on the 29th or so.

[K404]

Nothing in the UK

[sin0822]

does someone want to take a look at IMC of E0 VS E1?

[dumo]

does someone want to take a look at IMC of E0 VS E1?

Got a couple of 3570k...E0 2850 max cold/air 4X4 and 3000+ 2x4 cold, E1 2850+ 4X4 so far on air Edited April 24, 2012 by dumo

[nedernakker]

Got a 3570K from the same shop yesterday, quick test under SS gave me 5.5 GHz, pot is mounted now going to test it under cold today.

[Massman]

IMC not yet important - 6.6+ retail 1.9V LN2 -> GO FOR IT!

8-11-8 or so is ok...everyone is struggeling here and there...much to learn on IVY!

 

IMC's pretty important imho. Ivy only starts flying when you're at DDR3-2600+ or so.

[M.Beier]

IMC not yet important - 6.6+ retail 1.9V LN2 -> GO FOR IT!

8-11-8 or so is ok...everyone is struggeling here and there...much to learn on IVY!

 

You need one hell of a LN2 contract to learn on Ivy

[Hazzan]

You need one hell of a LN2 contract to learn on Ivy

 

exactly Marc....I agree with that