Benchmark software

GPU score only this way it's not CPU biased look at the vantage scores then the gpu scores http://i127.photobucket.com/albums/p133/Bartmasta/vantage.png http://www.hwbot.org/signature.img?iid=295105&thumb=false&iehack=.jpg

2 questions for the moderators Has there been any further discussion about matching the cap for PCmark05 with the orb ? As i understand it, 300mb/sec windows startup limit on orb and 220mb/sec on hwbot. Also, for the HWBOT submission limit, I've just mamaged to get a 220.582 xp startup on an overall score of 28482. I've only orb submitted and didn't submit to the bot as i don't want post an illegal score. so the question i have is , is the exact limit 220.00[/b]mb/sec or 221.00mb/sec ? if I did post this score on the bot, would it be pulled ? any info appreciated dafridgie

i mean if you bench 3dmark you have to show gpu-z cap :how many VGas were used some scores are acceptee without it and some of them get trouble is there any rule? i mena i show it always and think everybody should

I want to submit a score from pcmark05 but I dont own the software so it dont write "you scored xxxxx points" unless you go to the ORB link and I cant see the details unless again I go to the orb link. Can I just supply some CPUZ / GPUZ screenshots and a orb link? Made a submission http://hwbot.org/community/submission/947852_mech0z_pcmark_2005_core_2_q6600_2.4ghz_15161_marks?tab=info If this is wrong then please tell me and I will remove it.

If HWB decide to continue supporting this bench, how will results be divided up? S462 S478 S939 S-AM2 (DDR2) S-AM2 (DDR3) S775 (DDR2) S775 (DDR3) I3 I5 I7 ?

I can't find anywhere to download sisoft sandra 2007. The only 2 places I found either have a trojan or don't work. can someone provide a download link to SS2007?

I submitted 2 results for both 32 and 1024 a month or so back with a 705e chip unlocked to X4. However, since wP rates cores now per category i submitted some new results with it at stock X3 but since there not better than my X4 unlock (obviously), it won't be available to see in the 705e category. My question is, will it show in the wP X3 leaderboard as the results i did at stock X3 will get my a 2nd and 9th? I don't seem to see them on the board. I'm worried because i already have the 705e under the X4 category, so it might not go under the X3 as stock. I don't really want to sacrifice my best wP scores with it unlocked to X4 just to get more global and lose hardware po…

Hi i am just curious why i get so little points in aqua mark with 2x 5970 388124 = 1.5 points and i get more points for an old result with 1 gtx 260 333189 = 16.9 points ??? Is multi gpu getting less points now ??? Seems a bit silly you get less points for a better score ???? ________ Mercedes-benz sprinter

I got A core i7 870. so that means i have 8 cores fot wprime but i go to my bios disable 3 cores and hypertreading. am i allouwd to run wprime 32m for 1 core?

not only does it say my validation is invalid http://valid.canardpc.com/show_oc.php?id=920739 but when i try to submit the other cpuz files it counts it as the same file

I was trying to see how high i could push my laptop (loading a lot of appz), while saving validation files, and got a lot of these results: http://valid.canardpc.com/show_oc.php?id=920284 Multi 10x? Never seen that before with that CPU... Is it a bug?

What are the odds that benchmarks like Aquamark03 , and perhaps 3Dmark2001, are getting new resolution quality rules? keeping things back in balance...

Hi as far as i know hyperpi uses the same superpi 1.5 XS is it allowed for validation?

I keep getting this error when I try to begin the bench on this new install. Anyone know where my problem lies? This is with XP 32.

(im sorry, i learnt english, my english is bad, im from poland) I have a problem from HD4200: 3dmark 2003 is loading very big time (∞) - not starting 3dmark ventage is is starting, i click run benchmark he loading very big time (∞) - not starting I'm download patch 09 from guru3d for 3dmark - not help me... HELP ME!!!

ok So on the hwbot main beching submission part (i.e. not the forums) I change my username to overclocking101 witch is my new handle BUT when I go to submit wprime it only will read my philbrown_23 for submitting I cant delete it and switch it to overclocking101 therefore I cannot submit any wprime scores any longer. can someone help with this?

How can I improve my score on this benchmark??? have some "trick" to improve the score?? i have a 2.3 ghz and I can not go further: (

Has anyone been able to get PCMark05 to give a score with the Aero interface on? The 3D test don't run when the Aero interface is on for me. They run fine with the Windows 7 Basic theme but then the 2D Transparent windows score suffers a lot so while I can get a score with it the Basic theme load it scores poorly. In the full aero mode the bench fails to run the 3D tests. I get the same slow 2D transparent windows in Windows Server 2003 which is my other operating system. Hardware is Athlon 6000+ and Radeon 4870 1GB. As an aside, my old GeForce 8800 GTS 640 does not have the slow 2D transparent windows test problem that the Radeon has and indeed I have n…

Hi all In the same way than the comparative degree of the ATI drivers There is a comparative with de NVIDIA drivers 182.06 - 182.08 - 182.50 - 185.85 - 186.18 - 190.38 et 190.62 under 3DM01 , 3DM03 , 3DM05 et 3DM06 I hope it will help someone Thanks for reading http://pc-overware.be/index/component/content/article/109-pilote/1432-comparatif-des-drviers-nvidia-en-benchmarks.html?directory=100062 Good benchs to all

Hi all here is a link of a comparative degree with the Ati Catalyst drivers 8.12 - 9.4 - 9.5 - 9.6 - 9.7 - 9.8 and the latest 9.9 In 3DM01 , 3DM03 and 3DM06 With Xp (DX9) and a crossfire of HD4870 Maybe it's helpful for somebody , A test necessarily has not to take as the absolute truth, but the good indication for some http://pc-overware.be/index/component/content/article/109-pilote/1303-kio.html?directory=100062 http://pc-overware.be/index/component/content/article/109-pilote/1381-les-catalyst-99-testes-en-benchmarks.html?directory=100062 Sorry for my bad English

All of a sudden test seven just crawls. I have changed gpu's and tried different compatibility settings to no avail. I even re-installed the app but no change. Does this sound like a mb problem to you guys? Evga X58 LE Intel 950 GTX 295 Win 7 x32 Edit: Just ran a 3DM05 at 4380MHz with the same set-up and scored a 36933...I am baffled. What could be the culprit in PCM05?

Hello all! New to this forum, I have a evga 758 A1,Intel Xeon W3520 I am trying to over clock and the machine is not hooked to the internet. So when I do a vaildation for CPU-Z I save the file and send it to my jump drive then take it to my online machine, but the validation is in Chineese? It looks all corrupted where it would show the CPU, there is no stepping showing, blah blah. Not trying to deceive just get a good validation, maybe I "have" to be online for it to work right now? Any help. I tried a search(google and these forums) for it first. Any help ...... Thank you!

Last night I was in Wprime and saw a "update libraries" option box abouve Advanced settings, I clicked on it and it installed what it said a better way to read CPU settings but now when I submit a score I get "unknown cpu". I tried to delete wprime and reinstall, even deleted Cpu-z and reinstalled since that's where it reads from and it still does the same thing. I really do not want to reinstall windows just to fix this does anyone else have any ideas?

Is this regular score? I have ONE gtx 295 on max and i7 975 processor on 4.4 GHz

hi got an issue at the moment with crash and burn "crashing", real strange it does it on stock clocks and when overclocked im on win7 32bit at the moment on 186.16 drivers ive re-installed and patched im thinking maybe a 32bit issue? has anyone got an idea...your jedi skills will not go unnoticed Cheers