Christian Ney

For him it's not a bug, It's not his first account, we banned him already at least one time due to posting scores that belongs to other members. For exemple just look at his cpu frequency results, they are all stolen

nice one, now set mem ratio to 1:1

yeah he is right, On s604 I was able to do so too Added to the buglist http://bugs.hwbot.org/browse/HWBOT-696

Haters gonna hate: http://www.evga.com/products/moreInfo.asp?pn=100-UT-0400-BR It's finally Retail & Available :banana: :nana: PDF: http://www.evga.com/products/pdf/100-UT-0400-BR.pdf Description NOTE: This device is intended only for advanced users with electronics experience. EPower board is covered by DOA warranty only. Use of this product will void your graphics or motherboard warranty. EVGA "The Untouchables" EPower board is a separate VRM board to provide additional power for target devices, such as videocard, motherboard or other devices which may need high-current low-voltage power source. Notes The EVGA EPower board is designed to operate with two voltage outputs: VCORE output - Voltage adjustment range of 800mV to 2000mV. Current source up to 400A. VDIMM output - Voltage adjustment range of 1000mV to 5000mV. Current source up to 80A. Recommended Toolkit AWG12 or AWG10 Copper Wire with Insulation 60W or 80W Soldering Iron Digital Multimeter for Resistance and Voltage Checks EVGA EVBot with X58 Firmware 80 or 120mm +12V DC FAN with 3-pin header for VRM Cooling Flux and Solder for Wire Joints MSRP: $99.99 Same price as the EVBot http://kingpincooling.com/forum/showthread.php?t=1569

wow, on air, well done

Why without HT ?

Few weeks ago the submission report was broken, now it's fixed, but reported submissions during this period are missing Checked Blocked

Here I pay 3€ / Liter as well + dewar rent

tweak it at least lol

thx

Ticket ID: 1456 Priority: Low http://hwbot.org/submission/2242065\r\n\r\nthanks

Memory Single Stage Freezer v1.0: Working on a LN2 Memory container at the moment, Preview:

Awesome clocks on Llano, well done

Only 5.9 GHz ? hehe good for me

Standard stock cooling @ - 190°C ?

yes it will be ok, just don't submite under both 5900XT and 5950Ultra

Looks like TW don't have best SB-E chips yet congratz

http://www.techpowerup.com/159003/ASUS-Radeon-HD-7970-DirectCu-II-Graphics-Card-Pictured.html This card also features what is called "VGA Hotwire", which is a 2-pin cable, one end of which needs to be soldered onto the graphics card, the other is plugged into a special header on ROG Rampage IV series motherboards. This allows advanced users to eliminate the need for variable resistors and use the motherboard's voltage controller to tune come key voltage domains of the graphics card as if it were the motherboard's.

Some time after launches of graphics cards come modified versions from partner manufacturers. ASUS now appears to be one of the first with his 7970 DirectCU II. It is a fairly well-equipped cards where everything from circuit boards to the cooler has been redesigned. The cooler consists of 6 heating pipes, which is directly exposed to the graphics core. The tubes connected to a generous heatsink which is cooled by two 100 mm fans. ASUS states that the cooler should be 20% cooler than reference, and 14 dB quieter. It comes at the cost of room and board will take all three PCI Express locations in width. The actual circuit board has been upgraded to include 12-phase power supply. With direct control of the tension via ASUS's own overclocking utility, GPU Tweak. Otherwise, the graphics card factory overclocked to 1 GHz core and 1400 MHz on the graphics memory. A lift on 75 MHz and 25 MHz from the reference card. It is worth mentioning that it also supports six monitors, on a card. Source: TechSweden.org

Don't know, the engine doesn't like you maybe

FX-8150 is not retail

some duron

fail

Xeon E7 price up to 3500 USD LGA2011 22nm ES IVY-EP/EX Xeon 10C/20T, 105W TDP L3 30M 2.8Ghz Tubro Windows8, found on Coolaler: http://forum.coolaler.com/showthread.php?t=282074 I tried to translate the chinese into english with google translate but fail...

Looks like Xyala will coordinate stuff.