TerraRaptor

GraduS, you don't care for team power points (that is where SS rules)

I don't know what you mean by slow hdd but for my 53m run I was using old barracuda 7200.9 with forced udma2. So if you have at least udma2 capable drive it should not be a problem.

Waza is extremely important with 1m on s370, right. Slow hdd is not a problem at all.

Exceptions do not count)

What were the mods? Don't use more than 1.7-1.8v with air, that may be your problem.

Don't see any sense in this - imho balance is here already. We have teamcups already and they are not that popular.

I guess it is a bug)) My good tusl2 stops at 142 with 2:3:1 with vnb 2.27

Ludek, please post your qimonda chips photo here?

Now I see hwbot bug ))) My result is here - http://hwbot.org/submission/2990749_. Ludek, it was MB reporting DPCP active although it isn't, so I have to force it again with memset.

/you turn, Stermy. Show us another 10% - I found out a bug with my tusl thanks to your result and me trying to beat you and GraduS)))

Unchecked - XOC=1

Thanks Piotr. However we buy what is available - haven't seen 3PTA ever listed locally for sale.

LOL, I loose 1 second - something is wrong with me or I better go spleep and recheck tomorrow. Nice scores Stermy and GraduS)

I have 30 minutes to run same clocks and compare efficiency))

Ahaha Max, that cooler for burning butt is awesome!

Lol, it looks like my results are attracting comments in s370))

Max valid for this CPU is 1453mhz with 4:3. So it is either CPU or mobo limited. I just realized it was done with xoc=0, so probably 242 is doable

trodas, this mem does not scale with voltage (probably 0.5v will gain you 1-2mhz). I don't think also that it would be possible to gain another 3-4mhz with another CPU - I may only hope 242.5-243 is possible as I'm not sure if it is a limit on Trc already (with Trc=7 mem goes up to 188-189mhz, so with Trc=9 the theoretical maximum is 241.7-243mhz). If the limit is Tras then it may go higher. Stermy57, you have great efficiency so I hope to see your results this winter let it be air only.

Qimonda. Not possible for old infineon.

Thank you guys! GraduS, I know you beat it soon but I will try to push further.

Start with 3.3v and if not working switch to 5.0v. And try some software used for preparation of usb sticks for windows installation (WinSetupToUSB etc) - they allow change fixed/removable for usb drives, so probably may work with CF.

Waiting Sam's input

DRAM skews were very important for me when running e6400. And for cpu/nb I was using +200/+100.

Why not install standard vga driver for these cards? It don't allow me use 1024*768 mode but booting into vga mode via f8 gives 16bit 800*600, which is enough for 2d

napugal ezha goloj zhopoj