TerraRaptor

Run realtime priority linx in background))

http://hwbot.org/benchmark/pifast/rankings?hardwareTypeId=processor_1414&cores=1#start=0#interval=20 - my result is not shown on the list although affects rankings and I gain points

Well done Wiz!

I had experience with chaintech mobo based on Pro266 - it has a little better performance but there were some problems - usb not working after 155mhz, CL2.5 only at high FSB. Also I was able to get to 190mhz only with aircooled NB, 195mhz with SS on NB (but the mount was bad). And these clocks were reachable with custom wpcredit profiles only. Another thing - you will need to make a choice of single-sided winbond carefully. Those working flawlessly on i865/s939 are not the best ones here. For P6S5AT I was trying to do smth like TurboPLL mod (here is the link http://www.benchit.kz/blogs/blog/terraraptor/859.html) but I had stability issues as realization was baaad.

Switch to different XP build. Sometimes even msdn .iso are different for me.

Valid says it's sis620 @>200fsb. Not a hwbot bug. http://valid.x86.fr/155320

Thanks Strunkenbold! 2.3v or smth like that. Done with new tusl2, still testing it. I'm going to bench all my 200pcs of s370 CPUs. The best ones will then be ln2 tested to make some competition for GraduS and others;)

post photo and you'd probably get an answer.

Cleaning cache resolved it.

same here

Great score, Yevgeniy! Like it!

No, not only Kingston. I saw transcend @ebay. I own mushkin essentials.

Here is the answer

And he thinks "LOL, these guys don't even know there is a possibility to go over 10GHz using some NDA tips".

No, you won't be able to enable them in windows as bios first need to initialise them

I think in these cases you must provide both screenshots - one with the second tab with missing mem info and a second one with memset. However this is up to mods to decide.

Trodas, rage has a filltate of 250mpx/s (2 tmu x 125mhz). That means it can fill in 813 frames each second. So you are not right saying it's not possible to have more than 92fps. 255frames is believable for me as the card has an ability for that.

Nice, but why no cpu-z mem tab?

It is fine for older sdram chipsets. Just check the numbers for i815 chipset.

Very good!

I would check memory first - I have fx5200 with damaged circuit of one memory chip - and it is still operational except being 32mb/32bit instead of 64/64. Probably RivaTuner diagnostic report should be a start point for checking if all specs meet factory settings.

The efficiency is comparable to latest intel cores. x30 the frequency to get a 5ghz cyrix will make it calculate 1m in 7sec No way!

Okay, let the battle begin.

My fifty cents - why then posting results stating cold on mems (gigio's 1.266S) and 4v (some results with CUmine) when these chips go that high with stock cooling (no sinks) and volts? Isn't that an idication of giving a wrong direction?

You just don't know what was oldschool overclocking about - just ask yourself: 1. Why Japanese are so strong here even these days (check number of overclockers and the position of Japan in country rankings) 2. Why hipro5 sharing tons of info is still known to anybody in the community although he is out from hobby for years already? When you don't share key information with the community it makes the community static. Just ask yourself why we have a lot of interesting topics from XA, der8auer? Does it make their position within rankings worse - nope. I remember lots of input done to Kazakh overclockers from Russians, Ukrainians. I have a lot of kind words to Turrican, Wizerty, Maedhros etc. Competition should be a result of overclocking not "secrets". Sharing such tweaks as d3d, waza, catzilla tweak - isn't this what makes the whole community to reach new heights?