-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Everything posted by GtiJason
-
GtiJason - Core i7 4770K @ 5003MHz - 7sec 188ms SuperPi - 1M
GtiJason replied to Lays's topic in Result Discussions
Just a new cpu I am testing, the L318 batch good for cold. So far I can do 6.4g at 1.65v 2.425 VCCIN. Things seem to get a bit shaky though above 6.15g with mems at cl6 or 2800mhz PSC X of course. Yeah I only have like 20 points in 2 months since I have been practicing cpu and mems cold and researching/buying Z170 hardware. I move to enthusiast league the 22nd though and will be jumping to extreme instead right away -
Pretty sure this cpu can do this before it even has its first cup of morning coffee. XTU can be a tough bench to complete and this i7 slay's it without trying. For me the one and only concern is what is the CB temp. as it has already proven itself to be a solid 10 in all the other categories.
-
The mems came from a quad kit according to part number, what happened to the other 2? Are you keeping them, i assume these were from an RMA of an older kit is that right. Any tests done cold, if not no big deal. It seems strange that they do 2666c8 tRDWR, dr, dd at 13-13-11 1.78v, but need 1.9 for 2720 11-11-9. I have several pi kits, as well as a collection of of other high bin psc x (8155/8117/ST etc.) and none of them do 2666 under 1.83ish +v, but a few kits will do 2720 under 1.9v (1.88/1.89/1.9) with the two lowest being 8155pcb and 8117 for the other. Your kit could be interesting on cold though with the low voltage at 2666, and may only need the 1.9 because of tRCD, and cold should solve that problem
-
Does anyone know when AFR memory release date?
GtiJason replied to Rampagexx79's topic in General hardware discussion
You think the Ripjaw V and Trident Z 3466c16 is D die, to me that seems like it's harder to bin than 3600c17, i dont have them yet but do have the 4x4gb 3733 Tridents, weird design though gotta take a look at how they seperate to check. My cpu is still in transit, I bought from Zwitt so they are coming from France. Maybe I should just buy these and stop effin' around http://www.newegg.com/Product/Product.aspx?Item=N82E16820231956 -
I actually got my trident x 2400 retail kit from fleabay for $55, only retails ive tested so far that can do 2933c9 fairly tight at 2.24vDimm
-
Does anyone know when AFR memory release date?
GtiJason replied to Rampagexx79's topic in General hardware discussion
Oh yeah, also keep an eye on Essencore, Klevv aka SK Hynix . Klevv Cras is gonna have afr love, after all they do make em. https://translate.google.com/translate?hl=en&sl=ko&u=http://klevv.kr/940&prev=search it looks like they have 8 and 16 ic dimms in the works http://www.skhynix.com/products/consumer/consumer.jsp?info.ramCategory=consumer&info.ramKind=31&info.eol=NOT&posMap=consumerDDR4 -
Does anyone know when AFR memory release date?
GtiJason replied to Rampagexx79's topic in General hardware discussion
Yep, there will be Geil white dragon 10 layer pcb sticks in the somewhat near future, by looking at upcoming specs i would think several qualify, unlike the current kits that have flat main timings. For now i just grabbed a set of 3466c16 and 3733c17 E's and not have to worry about a foreign platform while freezing mems -
I have some adata gaming series sticks with psc , ic's that will do 2400c7 or 2600c8 tighter than nick shih tight presets (tWCL 6 not 7), but not considered tight by me or memory addicts in general but out of abut 20 kits of psc x these are the only ones valued that low, next in line performance wise are Crucial Ballistics 2133 9-10-9 and G.Skill Pi 1600 6-8-6-20 @ 1.6v or 1600 7-8-7-24 @ 1.5v but they all do 2666c8 standard tight and the CB 2133 & 1600c6 are new old stock. Valued at 50 plus alone no ship. I paid a fair amount more for them fairly recently
-
I would move this to the Marketplace Wanted section, also check r/hardwareswap for going rates on 980's and waterblocks. I sell all of my non-benchworthy hardware here in a day or so when priced right as there 's a lot of action in this sub-reddit! https://www.reddit.com/r/hardwareswap/
-
Nvidia 8800 GT/GTS/GS reference PCB 512 MB G92
GtiJason replied to der8auer's topic in Graphics cards
Yez zir, I know that from ocn thread, you guys gave me the tpu link to voltmod, but I am confused about the vr used for vGpu as I stated in previous post. It must depend on what volt range you are trying to acheive, so is 1.4v+ good for lin, if so any recommendations for cold h2o. The 500 ohm vr would probably be the way to go? Any links available to read up on how to do the math to figure out starting point based on initial resistance reading via dmm -
Nvidia 8800 GT/GTS/GS reference PCB 512 MB G92
GtiJason replied to der8auer's topic in Graphics cards
I know this is old but looking to do first hardmod on evga 8800gts 512 and according to the techpowerup thread it calls for a 500 Ω variable resistor for vGpu and 20 kΩ variable resistor for vMem, madshrimps also recommended the 20 kΩ variable resistor for mem but a 1kOhm adjustable resistor for gpu like you used. I am assuming the vmem mod depends on ic whether to raise or lower voltage and gpu voltage range id like to try on ln2 is 1.4v and possibly up to 1.5 vGpu. I did buy two of these just in case, but the mod looks fairly easy compared to some of the projects i do daily for work and a great way (cheap) to jump into hardmodding links for reference: http://www.madshrimps.be/articles/article/1000072/NVIDIA-Geforce-8800-Series-Overclocking-Guide/6#axzz3oDyoO3dr http://www.techpowerup.com/articles/overclocking/vidcard/149/2 -
I am interested, lets work out a price shipped to US through PM
-
Are both kits Samsung s/n? like my 3733 Trident Z kit
- 9 replies
-
- newegg
- f4-3600c17q-16gvk
-
(and 2 more)
Tagged with:
-
Asus Maximus VIII Impact
GtiJason replied to Bruno's topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OC
Oh come on, I haven't even received my cpu yet, I really don't need two MB's....do I, but I do already have 2 kits of 4 x 4gb G.Skills and am searching for a 6600K. Someone tell me the board is not as good as it's little brother for Ram timings/RTL's -
Asus Maximus VIII Impact
GtiJason replied to Bruno's topic in Skylake/Kaby Lake/Coffee Lake (-X) (Z170/Z270/Z370/X299) OC
Should be available in the US in around 2 - 4 weeks according to Anandtech http://www.anandtech.com/show/9712/asus-announces-the-rog-maximus-viii-impact-z170-motherboard -
Payment sent for no7 i7 6700k, thanks zwitt Please check PM for shipping address
-
I've been watching M7I for over 2 months and no price drops, I have M6I but Asus refurb and poor memory clocks
-
dRweEz - Radeon R5 230 - 2820 marks 3DMark Vantage - Performance
GtiJason replied to raules009's topic in Result Discussions
I would love to know myself, I am using this with pencil mod http://www.overclock.net/t/1029715/sapphire-hd6450-gddr3-512mb-voltmods -
My delidded 4690k had warped so bad it wouldn't even post. I just used a makeshift jig and turned cpu upside down and very slowly heated it up with blow dryer and heat gun. Once straight I re-lidded with Kryonaut and lots of black silicone to keep IHS from separating from pcb and regain it's rigidity.
-
I agree, this would be a privlidge to own, but I just can't come up more than about $450 right now and since Alex moved on to ddrQuattro I doubt he would be interested in psc mems plus cash
-
Nice cpu, what input voltages are you running at 4900 and 5250?
-
OC eSports Overview
GtiJason replied to JunkDogg's topic in HWBOT Development: bugs, features and suggestions
For me, as long as I'm logged in it shows all five stages andmy rank in each as well as what points I need to move up a spot. Gotta be logged in though -
Nvidia Inspector is a must have for driver tweaks, and allows voltage tweaks, also get bios tweaker and nv flash to get up o about 1.3v
-
I use MSI Afterburner, but EVGA Precision X v.4.21 works
-
I have Vietnam 4790k and 4690k, both strong on cold water but dont scale like my 4770k when froze. The Vietnam chips seem to hit a wall around 55 to 57, even without ht on i7 or 2core 2thread.....still nice though since im a novice and the imc is good if idle around 15C or less. Raules i5 seems to be a top example, mine is new batch X507C093