Team mate Gubben's DC chips on LN2:

 

i7 4790k L418C134 6500 MHz max valid 2c/2t http://valid.canardpc.com/hbpt3u

cb -120, 5 Ghz 32m air ca 1.33 volt IIRC

 

Pentium G3258 314C011 6.2ghz max valid, strong imc over 4 GHz http://hwbot.org/submission/2620436_gubben_memory_clock_ddr3_sdram_2002.5_mhz

5 GHz 32m air around 1.43 volt

 

All the cred to Gubben, by now he's probably a better overclocker than me At least I can help him with the english...

When you guys say "5ghz @ 1.3v....blablabla" what other voltage settings are you using.

 

Last chip I had 4790k L418C221 was flat out doing 4.7 @ 1.31v XTU/Cine15, 4.8 1.4v on water but think I'm missing something in the voltages (Vrin need 1.9v+, 1.5v a no go).

 

Could only just pull 5.0 @ 1.49 v 2c/2t, Maximus 7 Gene.

 

Surely the chip couldn't have been that bad (sold and moved to another today though). Relatively new to Haswell from X79 so have to ask.

first run 6,2ghz 03 in xp

 

 

chip L418C134.......on my second bench station....next time i try on gene7;) i think it can bench at 6,260 - 6,3ghz in xp's 3d;)

G3258 3418C019 A3099 -> 6330Mhz

 

-> LN2 at -120/-125° with 1.9/1.95v real vcore

 

 

Link : http://hwbot.org/submission/2621646_boblemagnifique_cpu_frequency_pentium_g3258_6330.1_mhz

 

Now need to take the time to test my 10pcs of news hot potatoes (3418C013 & 3418C017) :banana:

4790K L420B867 pass SUPER PI 32MB and HWBOTPRIME @ 5.3 GHZ 4C/8T @ 1.45V on WINDOWS 7 under SINGLE STAGE...It' s good ?

G3258 3418C019 A3099 -> 6330Mhz

Now need to take the time to test my 10pcs of news hot potatoes (3418C013 & 3418C017) :banana:

 

First test on Potatoes G3258 3418C017 A1017, not bad

 

 

http://hwbot.org/submission/2625085_boblemagnifique_cpu_frequency_pentium_g3258_6455.78_mhz

 

More details on the comment :celebration:

https://www.dropbox.com/s/gohsoa7cczmk6vj/03-6200.jpg?dl=0

 

https://www.dropbox.com/s/3ffb78g549t4fep/05-6200.jpg?dl=0

 

l418c 4790k 03 and 05 at 6200 4c 4t

any info on 4790k L418C380 ??? i have one here

 

 

edit: vary bad chip!!! only 6,1ghz pifast !!!! keep away

Edited September 13, 201410 yr by barbonenet

Great Potatoes Suxxor Edition G3258 :banana:

 

3418C013 A0224 4,7/4,8ghz at 1,45v Hwbot Prime VID 1,020v

3418C013 A0637 4,8/4,9ghz at 1,45v Hwbot Prime VID 1,056v

3418C013 A1251 4,5/4,6ghz at 1,45v Hwbot Prime VID 1,080v

3418C013 A1416 4,6/4,7ghz at 1,45v Hwbot Prime VID 1,032v

3418C013 A1942 4,6/4,7ghz at 1,45v Hwbot Prime VID 1,032v

3418C013 A3035 4,4/4,5ghz at 1,45v Hwbot Prime VID 1,080v

3418C013 A3097 4,6/4,7ghz at 1,45v Hwbot Prime VID 1,080v

3418C013 A5144 4.7/4.8ghz at 1.45v Hwbot Prime VID 1,080v

4790K L420B867 :

- 3DMARK 01,03,05 on XP @ 6.100 1.65V

- 3DMARK 06 on XP @ 5.9 HT ON 1.65V

- 3DMARK on VISTA and SEVEN @ 5.9

CB -130

g3258 amazing

3410B60? 5ghz 1,37v hwbot prime h110 corsair

 

http://i58.tinypic.com/ali3r4.jpg

 

test ln2

 

5955.65mhz 1.9volt hwbot prime

Two bad Pentium K's here.

 

3418C011 - 4.8GHz @ 1.45v - wPrime 32M

3418C013 - 4.6GHz @ 1.45v - wPrime 32M

 

Next!

one 4790k L425B855 is here

5G 1.25v sp32m with Corsair H100i

Ln2 Results soon

So sorry to hear you got another potato, bro - good luck on LN2

one 4790k L425B855 is here

5G 1.25v sp32m with Corsair H100i

Ln2 Results soon

 

seems a good chip bro...Good luck on LN2...

Ten G3258 L421B785. Best could boot WinXP at 5000MHz with 1.525V. Quite crappy batch ))

Adding a link to the Modlabs thread in the opening post!

 

http://www.modlabs.net/forum/topic/13991/page__st__4540

XLXS here: https://docviewer.yandex.com/?url=ya-disk-public%3A%2F%2FtRmyfUougGZoQT%2FTZF%2B6QffF9PWV1V2FtKkjKtdZ9Qo%3D&name=Statistik.xlsx&c=5429250b0fc7

3418C011 under phase:

 

5.3GHz wPrime 1024M @1.525v & 2v VCCIN - 45x cache @ 1.1v

5.3GHz will not boot into Windows 7, no matter what volts (up to 1.65v and 2.4v VCCIN) - I need to try something else I think...

Edited September 30, 201410 yr by TheMadDutchDude

i7-4790K / L421B937

 

Air : Hwbot Prime 5.1GHz (1.23v) // Vccin1.85v

LN2 : CPU-Z 7GHz (1.87v) // Vccin2.45v (Slow mode)

LN2 : Hwbot Prime 6.4GHz (1.62v) // Vccin2.3v

 

Vid : 0.92v

CB/CBB : -140 / -130℃

 

http://www.youtube.com/watch?v=3oHLL6D93wE&feature=youtu.be

 

http://valid.canardpc.com/s6lb01

 

http://hwbot.org/image/1240488.jpg

Edited September 30, 201410 yr by namegt

Very nice chip!

3418C011 under phase:

 

5.3GHz wPrime 1024M @1.525v & 2v VCCIN - 45x cache @ 1.1v

5.3GHz will not boot into Windows 7, no matter what volts (up to 1.65v and 2.4v VCCIN) - I need to try something else I think...

 

what vids have those at stock on bios and on cpu-z under load on win7 ?

and what temp reach ur phase,and what temps reach the cpu's on bench?

thanks

Edited October 2, 201410 yr by superV

It's the same chip, sorry about that.

 

The VID is 1.036v and my phase is at -45c (ish) on idle. The CPU doesn't run hot and raises the phase by about 5 - 6c during long loads.

 

I've constructed my den in the garage and I will be benching tomorrow to try to see if it will go any further. I reckon it will hit 5.5GHz on <1.6 volts but I need to try to get it to boot into 7. I will probably end up re-installing to see if that's the issue or not.

It's the same chip, sorry about that.

 

The VID is 1.036v and my phase is at -45c (ish) on idle. The CPU doesn't run hot and raises the phase by about 5 - 6c during long loads.

 

I've constructed my den in the garage and I will be benching tomorrow to try to see if it will go any further. I reckon it will hit 5.5GHz on <1.6 volts but I need to try to get it to boot into 7. I will probably end up re-installing to see if that's the issue or not.

 

nice.soon i start building my phase.

on win7 u get 5ghz at less voltage than water?how much less?

thanks.

that windows 7 thing is weird,at high frequency's, it's just not working,benches start to give errors.i can boot with my 4790k to win7 5ghz@1.28v,but to make it stable it needs 1.37v,cuz will crash during benches at half of the bench.

I can boot into 7 at 5GHz with 1.45 volts, I didn't try any lower because I know it can do 4.8 on air at 1.45 and it was a random shot in the dark as to whether or not it would work, and surprisingly, it did.

 

Win 7 is a bitch to boot and hurts max frequency by (I think) as much as 2-300MHz in certain benches.

 

Maybe you are not using the right version of windows 7 .