February 2, 20169 yr I also had lots of trouble with mem-OC om RVE. On different CPUs. Some times it would boot fine, but most of the time it would drop one or two channels. I don't remember if I tried setting RTL/IOL manually, but that might help.
February 2, 20169 yr Sounds the same as I've had. 1st time round did 3400c11 @ 1.5v no problem. Restart and no boot then just went downhill from there on out. Did try manual rtl but made no difference. Guess I've just been unlucky and ended up with a picky board...
March 10, 20169 yr Crew Not possible to boot in at 3200? Then up in Windows... The only way for me to warrant real quadchannel at C11... FYI CPU-Z readouts are bugged... Don't always believe what you see Edited March 10, 20169 yr by Leeghoofd
March 11, 20169 yr Anyone give me some help on getting TurboV installed on W7x64. Everything installs fine and install the MEI driver provided here but when I launch TurboV, says to install MEI from mobo CD. Would like to not to have to restart every time to make some small voltage adjustment.
March 11, 20169 yr Crew Anyone give me some help on getting TurboV installed on W7x64. Everything installs fine and install the MEI driver provided here but when I launch TurboV, says to install MEI from mobo CD. Would like to not to have to restart every time to make some small voltage adjustment. run TurboV_Core\IccCom\ SetupICCS.exe and see if it opens...if so it will always work from there on
March 12, 20169 yr Install xtu then try again. Wasn't playing with XTU, just talking in general. run TurboV_Core\IccCom\ SetupICCS.exe and see if it opens...if so it will always work from there on This worked perfectly, thanks :ws:
April 18, 20169 yr Hello, I need help, my debug LED indicates AF . I'm stuck , I can not go into the bios . What can I do? thank you
April 18, 20169 yr Crew sorry rampage v extreme quel carte video ? Tu n'as pas une autre pour essayer ?
April 18, 20169 yr quel carte video ? Tu n'as pas une autre pour essayer ? a R5 230, same result. I come again. thank you I also changed ,ram, ssd and power . I flashed another bios, and it 's the same. Google Translate Edited April 18, 20169 yr by nexus35
May 9, 20169 yr hi can someone tell me why my rampage v extreme set the vccio voltage to 1.3 volt when i raise my memory to 3000 mhz i think the voltage is very high
June 1, 20169 yr Reading a post earlier up, Samsung B-Die appears to work well with the R5E, question is, what vendor sells with this IC? I see some G.Skill 16 quad kits use D-die or Hynix MFR Maybe there is no B-die quad kit??
June 3, 20169 yr Yeah most should work for R5E as well. R5E BIOS 0051 https://www.mediafire.com/?gbkfaidyas5g33s * Adds support for per-core voltage adjustments on BWE. To use this Fully Manual Mode must be disabled and Adaptive Mode is not supported. TurboV Core 1.01.08 with per-core voltage support https://www.mediafire.com/?730bb4c9g3304wz * Core numbering is not matching between BIOS and TurboV Core Edited June 14, 20168 yr by elmor
June 3, 20169 yr Hi Elmor - I'm using 3101 on the R5E with a retail 6950X... samsung B-die kit (8x8GB) which ran 24/7 at 3200c13 with tight secondaries fails post at 3200 at any timings/voltage, whereas 2666 is at least stable with somewhat tight secondaries. Is the something in the new bios (or maybe one of yours) that might help address the problem? Is 0051 significantly different from 3101?
June 3, 20169 yr Hi Elmor - I'm using 3101 on the R5E with a retail 6950X... samsung B-die kit (8x8GB) which ran 24/7 at 3200c13 with tight secondaries fails post at 3200 at any timings/voltage, whereas 2666 is at least stable with somewhat tight secondaries.Is the something in the new bios (or maybe one of yours) that might help address the problem? Is 0051 significantly different from 3101? that is not a problem,that is a system running way out of comfort zone.there is no warranty for that. try to increase VSA first.or settle with 3gig for 64gigs of mem ..
June 3, 20169 yr that is not a problem,that is a system running way out of comfort zone.there is no warranty for that. try to increase VSA first.or settle with 3gig for 64gigs of mem .. Huh? Warranty? The kit is a 64GB 3200C14 ram kit, 24/7 stable (*HCi Memtest 1000% and google stressapptest for 2h under Linux Mint using a 5960X and bios 1701 on the R5E). Will not post at XMp timings or more relaxed timings with the 6950X and 3101. Yeah, I know VSA a bit, and getting alignment is not necessarily something where more is better. Thanks.
June 4, 20169 yr Hi Elmor - I'm using 3101 on the R5E with a retail 6950X... samsung B-die kit (8x8GB) which ran 24/7 at 3200c13 with tight secondaries fails post at 3200 at any timings/voltage, whereas 2666 is at least stable with somewhat tight secondaries.Is the something in the new bios (or maybe one of yours) that might help address the problem? Is 0051 significantly different from 3101? It's just the IMC on your particular cpu, I noticed the exact same thing on a cpu I tested and to double check we retested it on both the R5E and Killer with same results. It was impossible to train at even 3200 or 3000 and even the lower dividers would sometimes lose channels when pushed to tight or vdimm is to high.
June 4, 20169 yr It's just the IMC on your particular cpu, I noticed the exact same thing on a cpu I tested and to double check we retested it on both the R5E and Killer with same results. It was impossible to train at even 3200 or 3000 and even the lower dividers would sometimes lose channels when pushed to tight or vdimm is to high. Daaum. That's what I feared. core does 4.4 with avx at 4.2, cache at 3.8 with 1.275V each in bios (measures a lot higher under load, like 1.34V). water cooled, temps are very good. Bum IMC it seems. Batch# j602c018
June 5, 20169 yr well - I got 3200 to run stable... but it's taking 1.2VSA and T2 (T1 just will not post - ugh!) edit: and stable to GSAT: Edited June 7, 20169 yr by jpmboy
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.