Crew Antinomy Posted December 22, 2010 Crew Posted December 22, 2010 It's nothing compared to installing OS on 486 Quote
Bobnova Posted December 22, 2010 Posted December 22, 2010 Bust out the floppy drives and hope your windows floppies haven't decayed? Worst part is installing 3.1 on a 486 is faster then installing win7 on a core2duo. Quote
trans am Posted December 22, 2010 Posted December 22, 2010 okay flashed to no cpc in abit flash utility. it went fine rebooted and got into bios and saw new choices including multi adjust. I got excited and set multi to 13 and rebooted. now no post whatsoever. I killed it I think. Im such an idiot. tried removing batt and different ram in separate channels and no go. Quote
Crew Antinomy Posted December 22, 2010 Crew Posted December 22, 2010 Clear CMOS. Appears that your CPU has a locked multiplier and no boot is one of the way the system acts when you try to change the multiplier. The other is - ignores and loads with it's default. Quote
I.nfraR.ed Posted December 22, 2010 Posted December 22, 2010 (edited) Don't worry, you can't kill it this way, afaik. Clear CMOS with the jumper located near the battery or just hold Delete button and power up the system. The second one should keep your settings in bios, but boot with defaults. My NF7-S v.2 also acts weird sometimes. Edited December 22, 2010 by I.nfraR.ed Quote
trans am Posted December 22, 2010 Posted December 22, 2010 Okay I'll give it a go tonight after work. thanks guys. There might be light at the end of the tunnel. Quote
Crew Antinomy Posted December 22, 2010 Crew Posted December 22, 2010 Usually hardware isn't so easy to kill. The only exception is the BIOS on Gigabyte boards that can die without any reason Quote
trans am Posted December 22, 2010 Posted December 22, 2010 (edited) well if youve had the luck ive had with hdwr in this contest you would think the same thing. Its not working dudes. Im gonna pull the cpu out and reseat everything. ******* I took everything off and cpu looks fine. Not sure what it is. what is the best ram slot to trouble shoot on? Ive been using one stick by the cpu. Edited December 22, 2010 by trans am Quote
placid Posted December 26, 2010 Posted December 26, 2010 I think there are a lot of pot in end year Quote
Mr.Scott Posted December 26, 2010 Posted December 26, 2010 I think there are a lot of pot in end year I fully expect there will be. Quote
ryba AICooling Posted December 28, 2010 Posted December 28, 2010 ok, so I think I owned 1st stage Quote
Mr.Scott Posted December 31, 2010 Posted December 31, 2010 (edited) Congratulations Team OCX. Nice runs. We will meet again, I'm sure. ~Team CP Edited December 31, 2010 by Mr.Scott Quote
Barton Posted December 31, 2010 Posted December 31, 2010 Good job, teams of all nations. You did well. Let's do it again sometime. ;>) Quote
zafiropo Posted January 1, 2011 Posted January 1, 2011 Happy new year to Everyone. Congrats to team OCX! Quote
Bones Posted January 1, 2011 Posted January 1, 2011 Congrats to team OCX for the win and to H.O.T. for a strong showing at the end - It's too bad only one could win since every team that competed was deserving but that's how it goes. I too would like to see more of these comps done - Had fun doing it and looking foward to competing in the next one. Quote
egm_xt Posted January 1, 2011 Posted January 1, 2011 (edited) Happy New Year to all. This was a great ompetition. Congrats to team OCX and to all other teams! Edited January 1, 2011 by egm_xt Quote
placid Posted January 1, 2011 Posted January 1, 2011 I like last minutes action , good job Team OCX & Hellas Overclocking Team it's make my team, AwardFabrik & XtremeSystems have same point 15. Very impresive result from Stelaras.... You're a dangerous man :Thumbs up: --=== Happy New Year 2011 ===-- Viva Old Skool Socket never die Quote
egm_xt Posted January 1, 2011 Posted January 1, 2011 (edited) This was a great challenge. We would have a better chance if socket 7 was included. I have just got a "brand new" GA-5AX and a k6-2+/550 Edited January 1, 2011 by egm_xt Quote
Massman Posted January 1, 2011 Author Posted January 1, 2011 Last minute jump I see. Nice work all! Quote
MTP04 Posted January 1, 2011 Posted January 1, 2011 Had a blast benching old hardware and competing against you guys. I'm looking forward to next classic competition. Happy New Year Everyone! Quote
Crew Turrican Posted January 1, 2011 Crew Posted January 1, 2011 nice work all. i see, the greeks were strong again. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.