elmor Posted May 30, 2016 Posted May 30, 2016 (edited) * OC Pack 0524 R5E10OCPAK0524 * BIOS 0051 https://www.mediafire.com/?xgtw8yc7yajwhgz (per-core voltage support on BWE, if used don't enable Fully Manual Mode or Adaptive Mode.). * TurboV Core 1.01.08 https://www.mediafire.com/?730bb4c9g3304wz (per-core voltage support) * X99 Per-core ratio v09 x99_pcratio_v09 Have fun guys. More to follow. Edited July 5, 2016 by elmor Quote
elmor Posted June 3, 2016 Author Posted June 3, 2016 Updated with BIOS + TurboV Core with per-core voltage adjustments. Quote
elmor Posted June 7, 2016 Author Posted June 7, 2016 Do you know when is going to be available ? It's in mass production at least, newegg says 18/6. Quote
MAXKING Posted June 7, 2016 Posted June 7, 2016 It's in mass production at least, newegg says 18/6. Great ! gonna get one of those for sure ! Quote
Rauf Posted June 7, 2016 Posted June 7, 2016 Wonderful board to use. Used this for three days at the World Tour Computex. Zero issues! Very good at ram OC: http://hwbot.org/submission/3229461 This was not maxed out, just what I could do with limited time during qualifier. By the way, I didn't get a single "ram channel drop" during the whole time I used this board. I'm seriously impressed with this board and bios! Quote
buildzoid Posted June 7, 2016 Posted June 7, 2016 Wonderful board to use. Used this for three days at the World Tour Computex. Zero issues! Very good at ram OC:http://hwbot.org/submission/3229461 This was not maxed out, just what I could do with limited time during qualifier. By the way, I didn't get a single "ram channel drop" during the whole time I used this board. I'm seriously impressed with this board and bios! Wow I might need to get this because my RVE drops RAM channels every few boots when benching. Quote
sexpot Posted June 11, 2016 Posted June 11, 2016 Hmm, seems I got some kind of early box edition? My RVE10 arrived today, all that was in the box is the systemboard an I/O shield. The box didn't even have any art on it, just plain white lol. No cables, manual, driver cd no nothing... Asus website don't even have driver download page yet Quote
elmor Posted June 14, 2016 Author Posted June 14, 2016 Hmm, seems I got some kind of early box edition? My RVE10 arrived today, all that was in the box is the systemboard an I/O shield. The box didn't even have any art on it, just plain white lol. No cables, manual, driver cd no nothing... Asus website don't even have driver download page yet Where did you buy it? Sounds like an early sample for media or similar. Quote
elmor Posted June 14, 2016 Author Posted June 14, 2016 Updated with new TurboV Core and x99_pcratio, both have a few bugs fixed. Quote
Gunslinger Posted June 14, 2016 Posted June 14, 2016 Wow I might need to get this because my RVE drops RAM channels every few boots when benching. Me too. I've got 3 RVE boards that do that, and you can forget about ever getting 4x DIMMS of B-Die to post Quote
Rauf Posted June 23, 2016 Posted June 23, 2016 Finally had time to test the board at home! Took it for a quick spin to test out mem OC. This was about max on air. Only set the primaries so far. :nana: Quote
Crew Leeghoofd Posted June 23, 2016 Crew Posted June 23, 2016 I've got 3 RVE boards that do that, and you can forget about ever getting 4x DIMMS of B-Die to post ??? no issue with latest biosses... Looking good Tobias :nana: Quote
Xtreme Addict Posted June 23, 2016 Posted June 23, 2016 Me too. I've got 3 RVE boards that do that, and you can forget about ever getting 4x DIMMS of B-Die to post 3500 quad channel B DIE CL11 on R5E with Haswell-E Maybe your boards are half dead or some problematic memories or IMC sucks monkey balls. Quote
Gunslinger Posted June 23, 2016 Posted June 23, 2016 3500 quad channel B DIE CL11 on R5E with Haswell-E Maybe your boards are half dead or some problematic memories or IMC sucks monkey balls. It's probably just worn out boards, CPU and IMC are both good. Quote
flanker Posted June 23, 2016 Posted June 23, 2016 Guys, 3200 MHz memory dividier working at your side? Thx. Quote
Hazzan Posted July 3, 2016 Posted July 3, 2016 Guys, 3200 MHz memory dividier working at your side? Thx. yess should be easy for it.. board is awesome..I remember when in taipe Hwbot oc tour Asia everyday this board always getting good rank... my last run with this board prety good enough Hazzan`s XTU score: 3494 marks with a Core i7 6950X Quote
flanker Posted July 4, 2016 Posted July 4, 2016 seems, I need another memory kit, not old Hynix in Predators Quote
Bruno Posted August 11, 2016 Posted August 11, 2016 To stop the channel drop on R5E, just set the DRAM Training on Ignore, in BIOS memory section. Worked for me on 2 boards. Quote
Niuulh Posted November 8, 2016 Posted November 8, 2016 if used don't enable Fully Manual Mode or Adaptive Mode.). Hi Can i set manual mode on cpu and cache if i disable fully manual mode ? Quote
elmor Posted November 25, 2016 Author Posted November 25, 2016 Hi Can i set manual mode on cpu and cache if i disable fully manual mode ? Yes. With Fully Manual Mode = Disabled all voltage control is through the FIVR. With Fully Manual Mode = Enabled there's a few additional tricks applied which is interfering with the per-core voltage adjustments. Quote
Niuulh Posted November 27, 2016 Posted November 27, 2016 Yes. With Fully Manual Mode = Disabled all voltage control is through the FIVR. With Fully Manual Mode = Enabled there's a few additional tricks applied which is interfering with the per-core voltage adjustments. Thanks Do you have a solution for benching on XP ? I can't install the MEI and can't clock Quote
elmor Posted November 27, 2016 Author Posted November 27, 2016 Thanks Do you have a solution for benching on XP ? I can't install the MEI and can't clock http://downloads.hwbot.org/downloads/tools/X99/X99driverXP.zip Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.