TASOS Posted May 16, 2018 Posted May 16, 2018 (edited) Get ready !!! ROUND 4 - Socket 423 (2000) (No adapters allowed) Stage-1 SuperPI 1M Stage-2 Wprime 32M Stage-3 Aida64 Memory Read Stage-4 3DMark 2001 - GeForce3 series Edited May 17, 2018 by TASOS Re-arrangment of stages Quote
TASOS Posted May 16, 2018 Author Posted May 16, 2018 @alexmaj467 Wallpaper for round 4 , my friend Quote
TASOS Posted May 17, 2018 Author Posted May 17, 2018 (edited) Stage 3 , with Aida64 Memory Read , we'll open soon. There is a minnor system bug. Be patient. Edited May 17, 2018 by TASOS Edit stage nr Quote
ozzie Posted May 17, 2018 Posted May 17, 2018 a minor system bug ?, according to the page it was supposed to be open 2 days ago http://oc-esports.io/#!/round/osibs_s4r4 Quote
Crew Strunkenbold Posted May 17, 2018 Crew Posted May 17, 2018 4 hours ago, TASOS said: Stage 1 , with Aida64 Memory Read , we'll open soon. There is a minnor system bug. Be patient. Should be fixed now. 1 Quote
TASOS Posted May 17, 2018 Author Posted May 17, 2018 Thanks We are ready to go. In fact , Scott is already there Quote
DR4G00N Posted June 4, 2018 Posted June 4, 2018 (edited) 1 hour ago, ZFeSS said: Whoops... At least it's DIP and not BGA so it can be fixed. ? Edited June 4, 2018 by DR4G00N Quote
TASOS Posted June 5, 2018 Author Posted June 5, 2018 @ZFeSS Old heatsink nightmare !!! I've seen that happen before (it can be repaired though). I always heat as much as i can , before trying to remove old such type of heatsinks. Do you know if, that was an original manufacturer compound or an aftermarket one ? I ask cause back in the days we used to make our own compounds , using epoxy in the mix. Quote
ozzie Posted June 5, 2018 Posted June 5, 2018 15 minutes ago, TASOS said: @ZFeSS Old heatsink nightmare !!! I've seen that happen before (it can be repaired though). I always heat as much as i can , before trying to remove old such type of heatsinks. Do you know if, that was an original manufacturer compound or an aftermarket one ? I ask cause back in the days we used to make our own compounds , using epoxy in the mix. i dont know much about it but now you say it tasos, it does look like an epoxy type of mix or is it the green colour thats throwing to look different Quote
ZFeSS Posted June 5, 2018 Posted June 5, 2018 9 hours ago, TASOS said: Do you know if, that was an original manufacturer compound or an aftermarket one ? I dunno. All that i know, that heatsink shouldn't be glued to GPU, and previous owner was a dumbass. I successfully removed other memory rad and GPU heatsink, so I don't need to upload nightmares anymore Quote
zafiropo Posted June 6, 2018 Posted June 6, 2018 (edited) Let;s see what happening, over or close too 154 fsb i have already run 156/156 motherboard limit in this socket Last stage (stage 4) is the key for winning this stage... Edited June 6, 2018 by zafiropo 1 Quote
macsbeach98 Posted June 6, 2018 Posted June 6, 2018 On 6/6/2018 at 12:44 AM, ZFeSS said: I dunno. All that i know, that heatsink shouldn't be glued to GPU, and previous owner was a dumbass. I successfully removed other memory rad and GPU heatsink, so I don't need to upload nightmares anymore I have slightly different heatsinks on my Hercules GF3 Ti 500 but they are glued on as well they not the only thing from that era that had heatsinks glued on with epoxy Quote
GRIFF Posted June 15, 2018 Posted June 15, 2018 Congratulations for all partecipants. Much respect for the results of Tagg at wprime (very strong efficiency) and Macsbeach at 3D Mark 01 (nice vga freq. You provide voltmods?) Quote
TAGG Posted June 15, 2018 Posted June 15, 2018 6 minutes ago, GRIFF said: Congratulations for all partecipants. Much respect for the results of Tagg at wprime (very strong efficiency) and Macsbeach at 3D Mark 01 (nice vga freq. You provide voltmods?) Thanks Can some mod please have a look at round 5, it seems that it has no stages... Quote
macsbeach98 Posted June 15, 2018 Posted June 15, 2018 (edited) Thanks.☺️ I might have pictures if not I will scrape the Let off the controller IC tomorrow and see what it is I done the mods a long time ago the mem mod is with fixed resistors. I think I originally got them from TPU or Guru3D Edited June 15, 2018 by macsbeach98 Quote
Crew Strunkenbold Posted June 16, 2018 Crew Posted June 16, 2018 21 hours ago, TAGG said: Can some mod please have a look at round 5, it seems that it has no stages... Just added stages now, let me know if something isnt right. Quote
Mr.Scott Posted June 16, 2018 Posted June 16, 2018 (edited) Just need backround. Also, bonus round is open but stages are closed for subs. Need backround for this too. Edited June 16, 2018 by Mr.Scott Quote
alexmaj467 Posted June 16, 2018 Posted June 16, 2018 Where is the topic of discussion for round 5 ? Watching football ? I'm tired of waiting to insert here Wallpaper once asked. 1280х1024 5 round 1920x1200 5 round 1280x1024 Bonus round 1920x1200 Bonus round 1 Quote
TASOS Posted June 16, 2018 Author Posted June 16, 2018 2 hours ago, alexmaj467 said: Where is the topic of discussion for round 5 ? Watching football ? I can take a wild guess , that some people may have to work too many hours sometimes , to provide to their families ? No time for football. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.