Jump to content

Featured Replies

Posted

Get ready !!!

ROUND 4 - Socket 423 (2000)

(No adapters allowed)

Stage-1

SuperPI 1M

Stage-2

Wprime 32M

Stage-3

Aida64 Memory Read


Stage-4

3DMark 2001 - GeForce3 series

 

Edited by TASOS
Re-arrangment of stages

  • Author

Stage 3 , with Aida64 Memory Read , we'll open soon.

There is a minnor system bug.

Be patient.

:)

Edited by TASOS
Edit stage nr

1 hour ago, ZFeSS said:

Whoops...

IMG_3795_2.jpg

At least it's DIP and not BGA so it can be fixed. ?

Edited by DR4G00N

  • Author

@ZFeSS

Old heatsink nightmare !!!

I've seen that happen before (it can be repaired though).

I always heat as much as i can , before trying to remove old such type of heatsinks.

Do you know if, that was an original manufacturer compound or an aftermarket one ?

I ask cause back in the days we used to make our own compounds , using epoxy in the mix.

:)

 

 

 

15 minutes ago, TASOS said:

@ZFeSS

Old heatsink nightmare !!!

I've seen that happen before (it can be repaired though).

I always heat as much as i can , before trying to remove old such type of heatsinks.

Do you know if, that was an original manufacturer compound or an aftermarket one ?

I ask cause back in the days we used to make our own compounds , using epoxy in the mix.

:)

 

 

 

i dont know much about it but now you say it  tasos, it does look like an epoxy type of mix or is it the green colour thats throwing to look different

9 hours ago, TASOS said:

Do you know if, that was an original manufacturer compound or an aftermarket one ?

I dunno. All that i know, that heatsink shouldn't be glued to GPU, and previous owner was a dumbass.

I successfully removed other memory rad and GPU heatsink, so I don't need to upload nightmares anymore :)

Let;s see what happening, over or close too 154 fsb

i have already run 156/156 motherboard limit in  this socket

Last stage (stage 4) is the key for winning this stage...

Edited by zafiropo

On 6/6/2018 at 12:44 AM, ZFeSS said:

I dunno. All that i know, that heatsink shouldn't be glued to GPU, and previous owner was a dumbass.

I successfully removed other memory rad and GPU heatsink, so I don't need to upload nightmares anymore :)

I have slightly different heatsinks on my Hercules GF3 Ti 500 but they are glued on as well they not the only thing from that era that had heatsinks glued on with epoxy

Congratulations for all partecipants. Much respect for the results of Tagg at wprime (very strong efficiency) and Macsbeach at 3D Mark 01 (nice vga freq. You provide voltmods?)
6 minutes ago, GRIFF said:

Congratulations for all partecipants. Much respect for the results of Tagg at wprime (very strong efficiency) and Macsbeach at 3D Mark 01 (nice vga freq. You provide voltmods?) 

Thanks :)

Can some mod please have a look at round 5, it seems that  it has no stages...

Thanks.☺️

I might have pictures if not I will scrape the Let off the controller IC tomorrow and see what it is I done the mods a long time ago the mem mod is with fixed resistors.

I think I originally got them from TPU or Guru3D

Edited by macsbeach98

Just need backround.

 

Also, bonus round is open but stages are closed for subs. Need backround for this too.

Edited by Mr.Scott

  • Author
2 hours ago, alexmaj467 said:

Where is the topic of discussion for round 5 ?

Watching football ?

 

I can take a wild guess , that some people may have to work too many hours sometimes , to provide to their families ?

No time for football.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...