haha I only tell that with such cpu it's in theory possible to do some WR, I guess we will stuck with 5.2 GHz cpus

I am only bringing water cooler, no cpu pot

Oh yeah the killer 3d03 combo 680 + x79

wr?...i dont think so no offence guys.

Should have did vantage

I am only bringing water cooler, no cpu pot

 

hahaha

 

CPU pot can be usefull for OC Workshop lol

Vantage and 680's suck.

 

Kind of a no man's land right now with hardware and the current benchmarks. For the event 7970's would suck due to black screen benching, 680's are really only good for '11 and '06 and even then only when paired with great CPU's.

so been trying for 3 hours now to turn off speed step and power saving nonsense ...kill myself

Edited September 7, 201212 yr by Splave

Schedule of the MOA competition with benchmarks available! : http://www.overclocking-tv.com/content/news/15668/msi-moa-2012-competition-schedule-and-benchmarks/

 

Same benches as for the qualifiers. SuperPi 32M, 3dm11 and 3dm03

Give us a cool live stream Timo plz... That means one without Trouffman popping up each 5 secs, euh on a second thought make that 5 hours ! A Trouffmanless stream would be awesome !!

Vantage and 680's suck.

 

Kind of a no man's land right now with hardware and the current benchmarks. For the event 7970's would suck due to black screen benching, 680's are really only good for '11 and '06 and even then only when paired with great CPU's.

 

 

Yeah they suck for vantage but they swallow for 03

umm ok on ln2 bios of these cards is it normal to be at 1500core/1500mem by default ?

umm ok on ln2 bios of these cards is it normal to be at 1500core/1500mem by default ?

no, sounds like you flashed it wrong. flash it again, this time make sure you have nothing on under the jacket.

 

bad jokes aside, yeah 1500/1500 is right for the LN2 bios that was sent out. some cards will be fine some will need a little extra to run it.

i cannot change the memory frequency at all stuck at 1500mhz

P0state bios my friend

Hi, anyone have problem entering the OS with the GPU @ LN2-1500 BIOS on HSF? Do we need to put the VGA to subzero before booting?

 

Thanks,

Edited September 8, 201212 yr by Lucky_n00b

Yeah, you need ln2 for ln2 bios

 

btw

 

anyone has problems with BigBang II 1.4(MOA) Bios?

Yeah, you need ln2 for ln2 bios

 

 

Ah thanks mate, It seems that I got problem booting with the LN2 BIOS on normal HSF, but the normal booted fine..will try LN2 Next

 

btw

anyone has problems with BigBang II 1.4(MOA) Bios?

 

Mine is fine I guess, what problem are you referring to?

Yeah, you need ln2 for ln2 bios

 

btw

 

anyone has problems with BigBang II 1.4(MOA) Bios?

 

nope

Yeah, you need ln2 for ln2 bios

 

btw

 

anyone has problems with BigBang II 1.4(MOA) Bios?

 

Seeing issue with vcore not setting on this bios and memory clocking seems worse aswell

I have problem with restart - always claims I changed memories/cpu

I have problem with restart - always claims I changed memories/cpu

 

I think my faulty memories were the cause of 'New Memory detected" screen, but if this happens to you also then it probably the 140 BIOS we're using.

 

I'm flashing back to 1.3b5 BIOS and see how things goes..

I have not gotten that issue yet, this kingston stuff Ive only managed to hit 2300 so far though

Mine Kingston 4x2 GB 2133 (PSC) are doing 2400 9-12-9-29 2T stable (of course on R4E they are better )

Mine Kingston 4x2 GB 2133 (PSC) are doing 2400 9-12-9-29 2T stable (of course on R4E they are better )

 

this is hynix

Did anyonne remove thermal shutdown resistor on 680L?

Edited September 9, 201212 yr by Xtreme Addict

rbuass did

 

 

Did you guys flash from 1.3 to 1.4b in DOS?

 

1.3 is alot better for me to, 1.4b sets SA to 1.35v default and CPU voltage has a mind of its own.

Edited September 9, 201212 yr by Splave