FireKillerGR Posted October 16, 2012 Posted October 16, 2012 just for the record it cannot boot @5ghz 2c/2t with 1.5vcore Quote
Crew Vivi Posted October 16, 2012 Crew Posted October 16, 2012 just for the record it cannot boot @5ghz 2c/2t with 1.5vcore pfff lol Quote
FireKillerGR Posted October 16, 2012 Posted October 16, 2012 just bought a L224C371 lets wish its good enough. Quote
splmann Posted October 16, 2012 Posted October 16, 2012 (edited) 3218C109 Batch for more Information write a pm ! Edited October 16, 2012 by splmann Quote
I.nfraR.ed Posted October 16, 2012 Posted October 16, 2012 That is fine, but there's no guarantee it will be a good LN2 chip. I had 1.32+V chip that did exactly the same as 1.26V (6.9GHz) and two others stopped at 6.6GHz. There are other similar examples in this thread. Quote
Andrix85 Posted October 16, 2012 Posted October 16, 2012 you need more cold try -140/150º I can try with more cold... I don't think it's so bad cpu...I've seen good score for this 3218B batch...The mboard can have problems with cold? Quote
FireKillerGR Posted October 17, 2012 Posted October 17, 2012 (edited) Splave's method: 45x106@1.25v 4c/8t run 2x Spi32m now will test for 5ghz 100x50 4c/8t @1.285v spi32m stable Edited October 17, 2012 by FireKillerGR Quote
Hiwa Posted October 17, 2012 Posted October 17, 2012 Heard 1.23 chip cant do more than 6600, seems old trick is not work anymore ? Quote
FireKillerGR Posted October 17, 2012 Posted October 17, 2012 if it can go 6.7-6.8 3d benchable I am ok Quote
Splave Posted October 17, 2012 Posted October 17, 2012 Heard 1.23 chip cant do more than 6600, seems old trick is not work anymore ? out of 1.23 1.24 1.25 and 1.28 chips 1.23 = 6.73ghz 1.24 = 6.65ghz 1.25 = 6.45ghz 1.28 = 6.37ghz Seems like some batches just stop scaling with volts earlier. the 1.23 6.73ghz chip can do 6.58 at 1.68v but then eats volts up to 6.73ghz Quote
FireKillerGR Posted October 17, 2012 Posted October 17, 2012 damn just wish mine will scale with voltage Quote
slaske6 Posted October 18, 2012 Posted October 18, 2012 (edited) I have a 3218B976 3770K batch and with ASUS MVG I have some problems..With single stage I reach 5.4 GHZ with 1.675V benchable in 3D and with Ln2 I reach only 5.8 GHZ 2c/2t @ 1.75V around -90°, -100°. If I up the temperature more than -115°, -120° and set 5.9, 6.0 GHZ I enter to windows but the system crash If I launch a benchmark. It's a limit of cpu? have same batch . can do 5 ghz 4/8 whit 1.255 vcore and 6.2 whit 1.75 vcore on dice can boot 6100 whit 1.68 an of caurse 32m stable 6300 on 2 cores 1.8 1m stable also on dice . hope it scales on voltage and cold of course to compare whit my 3218c055 that dos 6650 32m 4/8 cores will only 5.935 on dice whit 1.77 more vcore then it dont boot at all will have a malay batch L211b472 tommorow that dos 5 ghz 1.26 playing stable on msi gd45 Edited October 18, 2012 by slaske6 Quote
Andrix85 Posted October 18, 2012 Posted October 18, 2012 have same batch . can do 5 ghz 4/8 whit 1.255 vcore and 6.2 whit 1.75 vcore on dice can boot 6100 whit 1.68 an of caurse 32m stable 6300 on 2 cores 1.8 1m stable also on dice . hope it scales on voltage and cold of course to compare whit my 3218c055 that dos 6650 32m 4/8 cores will only 5.935 on dice whit 1.77 more vcore then it dont boot at all will have a malay batch L211b472 tommorow that dos 5 ghz 1.26 playing stable on msi gd45 Have you try my same batch with LN2 ? I have problems with temperature higher than -110°. For 6.2GHZ 4c/8t how much v.core with DICE your sample? And the other settings in bios that you use ? Thanks.. But I think my sample don't reach theese frequecy... Quote
Maximous Posted October 18, 2012 Posted October 18, 2012 3218c: http://valid.canardpc.com/show_oc.php?id=2548759 6868.1Ghz 4c/8t 1,944v Quote
ivanqu0208 Posted October 19, 2012 Posted October 19, 2012 L211B226 3570k×2 PCB 0051 4.5G 1.06v p95 1.26v 5G 4CORE PI 32M On air cooling U120E PCB 0053 4.5G 1.08v p95 1.28v 5G 《----- IMC 2982mhz on air I Sent hkepc john John test with LN2 PCB 53 6.887G http://valid.canardpc.com/show_oc.php?id=2549013 NOW IMC DUAL CHANNEL 3150MHZ ，mem is not well waiting retest Quote
Frostasus Posted October 20, 2012 Posted October 20, 2012 (edited) I wanted to thank all members and participants for your binning efforts. Thank You Very Much! It's so hard to find alot of info on the web about these particular chips, and when one does it's not that detailed, I really appreciate the time and energy everyone has put into finding "better" chips due to Intel's oversight, and for offering a possible third solution to the TIM problem so that someone might not have to attempt lapping or delidding on such a high end/high priced product. I know that batches that test to be "good" only raises the chance that the proc might be able to achieve more and that this isn't guaranteed. Can anyone please tell me what they have seen from 3770K L220B294 and if this might be a possible "good" batch. Again Thank You Very Much and keep up the good work! Edited October 20, 2012 by Frostasus More Info Quote
Crew Vivi Posted October 21, 2012 Crew Posted October 21, 2012 I wanted to thank all members and participants for your binning efforts.Thank You Very Much! It's so hard to find alot of info on the web about these particular chips, and when one does it's not that detailed, I really appreciate the time and energy everyone has put into finding "better" chips due to Intel's oversight, and for offering a possible third solution to the TIM problem so that someone might not have to attempt lapping or delidding on such a high end/high priced product. I know that batches that test to be "good" only raises the chance that the proc might be able to achieve more and that this isn't guaranteed. Can anyone please tell me what they have seen from 3770K L220B294 and if this might be a possible "good" batch. Again Thank You Very Much and keep up the good work! Hey man! and welcome. best way to guess if its a good chip is by seeing what it needs for 5ghz the guideline is: 5ghz at 1.25v is in some cases 6.8 - 6.9 chip 5ghz at 1.3 - 1.35 is anything from 6.5 to 6.7+ Quote
Xtreme Addict Posted October 22, 2012 Posted October 22, 2012 Okay so I have "magic" hand 9 CPUs: 1x Malay L225B @ 6.4-6.5 GHz 3DMark 03/05 4 cores 1x Malay L224C @ 6.7 GHz CPU-Z 1 core 1x Costa Rica 3224B @ 6.3 GHz CPU-Z 4 cores 1x Costa Rica 3224B @ 6.6 GHz CPU-Z 4 cores 1x Costa Rica 3230B @ IMC sucks, can't boot 2520 mem, CB - 175*C 1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores 1x Costa Rica 3230B @ 6.3 GHz CPU-Z 4 cores 1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores 1x Costa Rica 3230B @ 6.2 GHz CPU-Z 4 cores Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.