October 11, 201311 yr hmm so L3153xx does seem to scale? in some cases? Yeah I think it's a decent batch to try with. I had the same things happen with L312B, there were still chips that couldn't get over 6g.
October 11, 201311 yr updated first post. Hell of a list guys Thank you. I have printed it and have it with me to the store lol
October 11, 201311 yr Ill try the other L315B today, was a bit higher 5ghz volts but maybe decent too
October 11, 201311 yr Hey man,just see what your chips can do on Pi 32M 5ghz 4 cores HT enabled,don't bother about what uncore can do.Just see if they can do 32M 5ghz and @ what volts,water or air If your chip can do 5Ghz 32M @ 1.2-- volts you should have a nice scaling chip PS always keep a eye on temps and volts being used on air too,no need to kill chip Hey Bullant, i finally got around to installing the 4770k this morning. I've only put 1.148 through it so far and boots into XP/WIN 7 @4.3 and runs 32M nicely. Temps are a bit highish as i'm only using the stock HSF and have a funny feeling it's not seated the best. Where as my first 4770k i had to go to and past 1.3v just to boot @4.3 let alone running anything. Going to reseat HSF late today and see if temps improve or hopefully WC gear turns up. So much more potential then my other one.
October 12, 201311 yr Hey Bullant, i finally got around to installing the 4770k this morning. I've only put 1.148 through it so far and boots into XP/WIN 7 @4.3 and runs 32M nicely. Temps are a bit highish as i'm only using the stock HSF and have a funny feeling it's not seated the best. Where as my first 4770k i had to go to and past 1.3v just to boot @4.3 let alone running anything. Going to reseat HSF late today and see if temps improve or hopefully WC gear turns up. So much more potential then my other one. I think it isn't a good CPU, because best of my crappy CPUs could run Pi 32M at 4500MHz with 1.15V and it was too much to reach a good clock. For 5000 I had to set 1.39V. I think Splave's great CPUs can run @4.5 with 1.0V
October 12, 201311 yr Awesome ssmercer. Great batch u got! Try 5ghx when u get nicer cooling Thanks Vivi. I worked out why temps where a bit high even with the stock HSF. One of the CPU fan cables was caught in the fan so the fan wasn't running:o. Now running some 7-10c cooler lol. STill want to wait for my H2O gear and have some real fun. I think it isn't a good CPU, because best of my crappy CPUs could run Pi 32M at 4500MHz with 1.15V and it was too much to reach a good clock. For 5000 I had to set 1.39V. I think Splave's great CPUs can run @4.5 with 1.0V Hi MaJ0r, yeah it's up with the best that's for sure but it's heads and shoulders better than my first chip that died. Also in comparison to others i am extremely new to this and no doubt there is other settings that will help me also.
October 13, 201311 yr thank you serg. Maj0r: not yet .. but i will bench it with Ln2 in this week for 3Ds (i'm not a 2DBoy )
October 13, 201311 yr Crew Fingers crossed, seems my binned 4670K turned out to be a dud... me and haswell don't get along
October 13, 201311 yr Fingers crossed, seems my binned 4670K turned out to be a dud... me and haswell don't get along Did you kill your cpu or I understood you wrong )
October 13, 201311 yr Crew nope it was pre binned by a reliable source. I couldn't even do 4800 on neither of my 3 boards... 4500Mhz 1.2Vcore was okayish. No idea what is wrong... either this CPU degraded heavily or it was a dud from the start... Who's to blame, that's the million dollar question... I am not pointing any fingers... but honestly something is wrong with Haswell sigh...
October 13, 201311 yr nope it was pre binned by a reliable source. I couldn't even do 4800 on neither of my 3 boards... 4500Mhz 1.2Vcore was okayish. No idea what is wrong... either this CPU degraded heavily or it was a dud from the start... Who's to blame, that's the million dollar question... I am not pointing any fingers... but honestly something is wrong with Haswell sigh... I remember this. For what you've payed for it, you should demand an answer from the seller.
October 13, 201311 yr 4770K Batch 317B802 Cinebench R11.5 5,9 GHz 1,6 Vcore 2/2 Cores 3DMark 05 6 GHz 1,537 Vcore
October 14, 201311 yr nope it was pre binned by a reliable source. looks like it is time to downgrade that sources status back on topic L316B316 4.8Max @ 1.45 would not do 5Ghz IMC up to 3300 no prob on air
October 14, 201311 yr It;s hasfail... I had one CPU 5 GHz @ 1.35v 4/8 boot to OS and run SPI32M and I put it to the box, 5 days later it couldn't enter OS AC 5 GHz anymore... true story it's still alive but it can now only do 4.9 @ 1.325v 4/8 to boot OS/run spi32m, 5 GHz without cold (like SS) is now IMPOSSIBLE
October 14, 201311 yr L315B371 : air : 4900MHz 2c/2t spi 32M @1.35v 4700MHz 4c/8t wprime @1.3 LN2 -130°C : 5800MHz 4c/8t Cinebench 1.68v 6000MHz 1c/1t 32M 1.68v ---- L313b986 : Never test on air LN2 -120°C 6100MHz Cinebench 1.65v, My team mate kill it ---- Other L313bxxx Never test on air LN2 @-120 6050MHz 1M 1.75v ---- L316bxxx 2 pieces, only LN2 test, and suxxx, less than 6GHz ---- Waiting for two 312b520...
October 14, 201311 yr 4770K batch no. L311B514 4C/8T 4.5GHz CINEBENCH @ 1.22v 4.6GHz CINEBENCH @ 1.28v 4.7GHz CINEBENCH @ 1.375v 5GHz @ 1.45v - POST but fails to load Windows 2C/2T 4.8GHz SPi 1M but no more at 1.4v I will continue testing it when I have a moment. Starting to hit the upper limits of my D14 but I will take it outside when I get a moment. Edited October 14, 201311 yr by TheMadDutchDude
October 15, 201311 yr 4770K batch no. L311B514 4C/8T 4.5GHz CINEBENCH @ 1.22v 4.6GHz CINEBENCH @ 1.28v 4.7GHz CINEBENCH @ 1.375v 5GHz @ 1.45v - POST but fails to load Windows 2C/2T 4.8GHz SPi 1M but no more at 1.4v I will continue testing it when I have a moment. Starting to hit the upper limits of my D14 but I will take it outside when I get a moment. you should bench more from this batch see post number 735 and 709 and 610 in this topic almost all of them 6.1ghz+ for 3Ds....
October 15, 201311 yr 4770K Batch 317B802Cinebench R11.5 5,9 GHz 1,6 Vcore 2/2 Cores 3DMark 05 6 GHz 1,537 Vcore Guys, what's the deal with these cpus doing all cores stable high clock, low volt but not even making 1M at 6,3? My 4670k is very similar to Bullshooters cpu, I actually had it stable in XTU over 5,7 GHz but max 1M is 6,22 GHz @ 1.66 Vcore Is it just low leakage, non scaling?
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.