websmile

We had the same situation last year and it is no problem, it is one reason we ask for 2x gpuz including sensor tab with clocks

Nice gadgets, please show them all and add a sheet with your nickname and date to it, thank you

You used the correct command bcdedit /set useplatformclock yes? If yes, it might be a platform issue, to be sure please ask dev at support thread http://forum.hwbot.org/showthread.php?p=467390#post467390

Seems download link is corrupted, I don´t think a warning will brick your ssd P.S. You can download wprime and spi when you go to rules, this link works, thanks for the heads up, might be better to avoid the downloads links at benchmark processor site for the two programs preliminarily

Good luck, my 3733s were awful, big disappointment, because the e-die from patriot I had were really strong and could handle 4k+ quite easy

Try the profile and first let io and sa on auto, will be quite high. Then you can vary imc volts and see what gives you best stability at lowest values for example. Should work, the MOCF at 4K is quite easy to handle P.S. 1,2 and 1,25v io and sa work my current chip, problem on air is it does not scale a lot higher, 4133 is not reliable because of this

Patriots I had were poor, on rgb tridentz no idea, I wont spend 300 euros to test

Any signs of damage or degradation on the cpu?

I sense backups

Seems OK for me - please note that 1080 ti is not allowed for first round of challengers, it was released after the competition started, so results will not count. I removed them, of course they stay at hwbot

Checked your ebay listings, I think I am in for some free goodies

This cpu is strong, if it scales you will get decent result on cold

No, not allowed, results will be removed in the end

Keep on binning - oops, sorry

Sure, benchmark rules apply, for pre skylake systems the windows real time clock bug is the problem, so you will have to use 7 on haswell for example

Non K oc is locked on Z270 by default, if there are modded BIOS versions which can do, I doubt it

There is program called powermizer I think which can enhance this, seems load at older benchmarks is sometimes not enough to get full boost on new architecture, maybe you can google this or look at benchmark software section to see if it is there for download

strong start with card on air

I will take a look and add it

Geekbench is not able to provide a single link adress, and hwbot has problem to configure links accepted therefore, we have same again at gskill, so I asked for a fix. Should be done tomorrow I hope...

Plausibility check - this is why we have the link on top, you can see a lot at sub tests that scales from cpu frequency mostly

GEIL Evo Corsa DDR3-2133 Cl9 2x4GB | Awardfabrik Necro-threading Thats what 2133s could do´for the records - btw, Pieter, my 4x4gb enhance corsa 1600c9 did 1866 c10 stable at full slots 1,5v

The problem is link adress/format, geekbench named links are not accepted at configuration, primelab are and we have this all the time, so I scheduled this to get fixed again, sorry for the inconvenience

Looks ok, time to get back in action

I see GSkill TridentZ at picture