ok spreadsheet should be visible to all now

will you also transfer all the current entries into that spreadsheet?

test made on watercooling,with 20 degrees ambient.

 

don't mind the efficiency,it was a short test,plug and play

 

 

Nice CPU you have there suzuki

@ sam OSX

 

yess i wil!

hi guys......how is l421b on g3258?

thanks i get one from rma

hi guys......how is l421b on g3258?

thanks i get one from rma

 

mine sucked ass 1.12v vid!

hi guys......how is l421b on g3258?

thanks i get one from rma

 

tried 3. all poo

tried 3. all poo

I'll probably get something like that from RMA as well...

that's where all of mine came from (and are going)

very bad.....i'm trying spi on water......1,42v for 4,8ghz ((((((

very bad.....i'm trying spi on water......1,42v for 4,8ghz ((((((

 

don't do that face,i should do it.bought 4,all sucked and 4th used sold as new to me.

L421C111

6230 pifast

5616 XTU

CB 125°C

32m need to test

did you try on air or h2o? thanks

Yes...H2o

4900 xtu

Again me...

L421C111

Depends on the board.... 6GHz FSX EASY!!!

1,65V

I'd say....find a low voltage cpu of these...and you are a winner!

My chip scales and scaes and scales!

Sure...6300 is the end of the party....but until then it doesn't care if it run 1/1 or 4/8!

Edited August 23, 201410 yr by Dancop

Nice Daniel, how is that about depend the board? witch board can handle it moer easy???

 

Thanks 4 the info !

Edited August 24, 201410 yr by nacho_arroyo

5th 4790k:

L420B770

i have bios stock vid 1.008v and on stock on cpu-z@4.4ghz under load i have 1.136v

for now on water:

4.5ghz@1.12v wprime 1024M temps max 55/52/55/50

4.6ghz@1.12v wprime 1024m temps max 56/53/55/51

4.7ghz@1.14v wprime 1024m temps max 58/56/58/52

4.8ghz@1.18v wprime 1024m temps max 62/60/62/57

4.9ghz@1.25v wprime 1024m temps max 71/69/71/64 with errors

after 4.8 ghz wprime starts to give thread errors and stuff.i need more time to tweak and need to find other testing program.

i dont know why with all 4790k after 4.8 its huge increase of voltage,i think is windows 7.maybe i'll try on 8.1

couldnt run cinebench at 5ghz@1.4v,freezes.i need more time to tweak.

Nice Daniel, how is that about depend the board? witch board can handle it moer easy???

 

Thanks 4 the info !

 

Cpu clock wise...m7g or msi xpower!

I don't have the asrock, which is pretty sure as well as the other two

test made on watercooling,with 20 degrees ambient.

 

don't mind the efficiency,it was a short test,plug and play

 

 

whats ur stock vid on bios?

good cpu superV!

@superv - 1.1 i think ...

L419B640 good for air bad for ln2 6.25 1m.

 

vid 1.058

 

4.8ghz - 1.268v - corsair H100i - white cheap thermal paste - auto fans

 

 

4.9ghz 1.37v

 

 

5.0ghz 1.47v

 

delided and now stable 5ghz

windows 7 is terrible at high frequency's.now skips the intro song,and the welcome intro,straight to the desktop ahahahah

finally happy !!!

 

[mod]*bitching removed*[\mod]

 

wprime 1024m 5ghz@1.36v

before cinebench wouldnt run even at 1.4v.

now 5ghz@1.37v from bios in override.

Edited August 30, 201410 yr by knopflerbruce

*snip*

Edited August 30, 201410 yr by knopflerbruce

*snip*

Edited August 30, 201410 yr by knopflerbruce