enzo972 Posted February 24, 2015 Share Posted February 24, 2015 Hi, can you explain me how and where you can see the vid please ? Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted February 24, 2015 Share Posted February 24, 2015 Hi,can you explain me how and where you can see the vid please ? http://www.overclock.net/t/665362/vid-voltage-identification-explained Quote Link to comment Share on other sites More sharing options...
enzo972 Posted February 24, 2015 Share Posted February 24, 2015 Thank you very much Quote Link to comment Share on other sites More sharing options...
CL3P20 Posted February 25, 2015 Share Posted February 25, 2015 Looking like a decent start for air/AIO.. 5820k - L443B806 : VID .997 1.2vcore / 1.8vccin @ 4.7ghz 6c/12t @ 4.9ghz for 32m on AIO Quote Link to comment Share on other sites More sharing options...
ObscureParadox_3XS Posted February 25, 2015 Share Posted February 25, 2015 Looking like a decent start for air/AIO.. 5820k - L443B806 : VID .997 1.2vcore / 1.8vccin @ 4.7ghz 6c/12t @ 4.9ghz for 32m on AIO Looking good so far dude Quote Link to comment Share on other sites More sharing options...
der8auer Posted March 5, 2015 Share Posted March 5, 2015 5820K L418C783 Hope this one doesn't let me down on LN2. Cinebench: 4500 @ 1,15 Volt 4750 @ 1,250 Volt 4875 @ 1,330 Volt HWBot Prime 5 GHz @ 1,385 Volt 1 Quote Link to comment Share on other sites More sharing options...
minicoopers Posted March 5, 2015 Share Posted March 5, 2015 Nice chip Quote Link to comment Share on other sites More sharing options...
dx4picco Posted March 5, 2015 Share Posted March 5, 2015 some global xtu in sight Quote Link to comment Share on other sites More sharing options...
der8auer Posted March 5, 2015 Share Posted March 5, 2015 Will get LN2 on tuesday Hoping for 6 GHz Benchstable. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted March 5, 2015 Crew Share Posted March 5, 2015 5.6 XTU for sure, go get em tiger Quote Link to comment Share on other sites More sharing options...
Sparks.nl Posted March 6, 2015 Share Posted March 6, 2015 (edited) The processor details: Intel Core i7 5820K (Watercooled) SR20S MALAY L438C252 2W429023A3460 --- 5011 MHz: http://valid.x86.fr/mbu2dv 5075MHz: http://valid.canardpc.com/ijt1gk 5100MHz: http://valid.canardpc.com/xqyfz4 5150MHz: http://valid.canardpc.com/y0x16i Edit 17-03-2015: All tested with 3 runs Cinebench R15 and XTU (successful runs) 4000MHz 1.04V 4500MHz 1.22V (1 run needs 1.2v) 4600MHz 1.28V 4700MHz 1.37V 4500MHz Core 1 needs 1.17v Edited March 24, 2015 by Sparks.nl More info about the processor voltages Quote Link to comment Share on other sites More sharing options...
Achill3uS Posted March 9, 2015 Share Posted March 9, 2015 guys can u recommend any good 5930K FPO? usually i prefer malay chips, what about these? not much good results with retail on hwbot list Quote Link to comment Share on other sites More sharing options...
jon6113 Posted March 9, 2015 Share Posted March 9, 2015 I noticed some in this thread using an input voltage of 2.1v Is this a safe voltage for 24/7 use on water? What is a max safe VRM temp recommended for 24/7 use on water? Thanks. Quote Link to comment Share on other sites More sharing options...
der8auer Posted March 9, 2015 Share Posted March 9, 2015 Yea 2.1 is totally fine. My max for air/water is 2,3. Quote Link to comment Share on other sites More sharing options...
jon6113 Posted March 10, 2015 Share Posted March 10, 2015 Yea 2.1 is totally fine. My max for air/water is 2,3. On my 5930k, I am stable at: 4.5 @ 1.32v 4.6 @ 1.38v I am running 1.95v input voltage. If i move towards 2.1 or higher will that help me use less core voltage? I would like to see if I can get 4.6GHz at closer to 1.35v. And, I would like to see if I can bench 4.8GHz at 1.45v (currently takes around 1.48v). Thanks for the advice. Quote Link to comment Share on other sites More sharing options...
Guest TheMadDutchDude Posted March 10, 2015 Share Posted March 10, 2015 I don't think it will affect the actual voltage needed but I could be wrong. Quote Link to comment Share on other sites More sharing options...
narutoxik Posted March 13, 2015 Share Posted March 13, 2015 hello stock vid 0.944V stable CB15 @ 4500mhz @ 1.262V on H2O retail S-spec: SR20Q Batch#: L429B856 (malay) is my new 5960x my "old"5960x (costa) is a suxor :-/ 4375@1.45v Quote Link to comment Share on other sites More sharing options...
Rauf Posted March 16, 2015 Share Posted March 16, 2015 Have tested four, first three were about the same, needed ~1.33V for CB R15 4500MHz. One L430C145 and two L424B979. Last one is a costa rica 3429A714. Does CB R15 4500 MHz @ 1.245V. Quote Link to comment Share on other sites More sharing options...
Sparks.nl Posted March 17, 2015 Share Posted March 17, 2015 Update of post 136. Stable processor voltages at some speeds. Quote Link to comment Share on other sites More sharing options...
enzo972 Posted March 22, 2015 Share Posted March 22, 2015 Hi all, my 5960x is 3422b280 batch and the stock vid is 0.944 but it needs 1.33v for 4.5ghz stable !! for 4ghz, it needs 1.108v. Quote Link to comment Share on other sites More sharing options...
eng.ahmedhelal Posted March 28, 2015 Share Posted March 28, 2015 (edited) Model : 5820K Retail batch : L443B777 Cooling : Nepton 280L stock vid 0.962V http://oi62.tinypic.com/2gtahhs.jpg oc to 4.5 GHz takes 1.25 voltage stable linx http://oi60.tinypic.com/2n022gz.jpg Edited March 28, 2015 by eng.ahmedhelal Quote Link to comment Share on other sites More sharing options...
jones965 Posted April 23, 2015 Share Posted April 23, 2015 My 5960X cpu IHS surface disastrous. Batch:3427B347 http://forum.hwbot.org/attachment.php?attachmentid=2880&stc=1&d=1429811552 The 5-5.1 GHz CPU value therefore stop. Quote Link to comment Share on other sites More sharing options...
Sparks.nl Posted April 23, 2015 Share Posted April 23, 2015 I polished mine... Quote Link to comment Share on other sites More sharing options...
jones965 Posted April 23, 2015 Share Posted April 23, 2015 I polished mine... Yes, a $ 1000 CPU just polished it. Warranty is over. Quote Link to comment Share on other sites More sharing options...
Pulse88 Posted April 27, 2015 Share Posted April 27, 2015 Batch L443B777 5820k 5060-5080 xtu 1.44v 5ghz+ uncore(1.35v) 2800 tight mem http://hwbot.org/submission/2834262_pulse88_xtu_core_i7_5820k_2051_marks score is 5040 but i have got it higher with 1.44v. 5400 hwbot prime 1.44v 5100+ uncore (1.35v) 2800 tight mem http://hwbot.org/submission/2834289_pulse88_hwbot_prime_core_i7_5820k_7923.42_pps Done with weak single stage. Scale with cold and voltage. i cap the voltage to 1.44v before i do cascade runs. cores and imc is very strong best haswell cpu i tested yet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.