xxbassplayerxx Posted October 22, 2015 Posted October 22, 2015 Hopefully next hardware release isn't so terrible from Intel in terms of supply. Quote
Massman Posted October 22, 2015 Posted October 22, 2015 there is a problem, is impossible to submit the results of XTU, the required version is wrong, there is no 6.2.0.8, the last is the 6.0.2.8 Haha, that's a funny one. Thanks for the report, fixed! :celebration: Quote
JunkDogg Posted October 22, 2015 Posted October 22, 2015 Haha, that's a funny one. Thanks for the report, fixed! :celebration: Nearly as funny as your "Pretest not protest" comment. Considering the ones protesting are the ones not allowed to use their boards to pretest. Quote
Christian Ney Posted October 22, 2015 Author Posted October 22, 2015 OP updated with when the submissions have been checked. Quote
Random Posted October 24, 2015 Posted October 24, 2015 So there isn't going to be room for anyone but the 2 from each region who qualify, right? I thought last year's event was semi-open so was hoping this would be. I would have liked to atleast met everyone is all. Oh well.. I am Officially, not participating. Quote
marmott Posted October 24, 2015 Posted October 24, 2015 Last year was pretty similar, it was just separate qualifier for each regions. 1 spot is will be randomly given to anybody who made it in the top 20 and did not qualify, 1 lucky spot for 12 people is not too bad. Quote
Christian Ney Posted October 25, 2015 Author Posted October 25, 2015 OP updated with when the submissions have been checked. So far I have removed 22 submissions. Check your emails to see why. Quote
topdog Posted October 27, 2015 Posted October 27, 2015 Is cpu-z 1.74 allowed as it's the latest version? Quote
Christian Ney Posted October 27, 2015 Author Posted October 27, 2015 (edited) No, it's not: "CPU-Z version must be v1.73" Added to OP Edited October 27, 2015 by Christian Ney Quote
Toolius Posted October 27, 2015 Posted October 27, 2015 (edited) Hmmm.... very few of these board available here we don't have the Gene in india so that just leaves me 1 board.. the hero No Asrock at all.. The only 2 decent OC boards available in india right now are the Hero and the M8E Edited October 27, 2015 by Toolius Quote
DrWeez Posted October 27, 2015 Posted October 27, 2015 Hmmm.... very few of these board available here we don't have the Gene in india so that just leaves me 1 board.. the hero No Asrock at all.. The only 2 decent OC boards available in india right now are the Hero and the M8E the Hero should be about the same as the Gene if not better. I can do a quick compare between the two this week/weekend for you if you like? Quote
MetalRacer Posted October 27, 2015 Posted October 27, 2015 My XTU sub is no longer linked to the comp for some reason? http://hwbot.org/submission/3016322_ Quote
Christian Ney Posted October 27, 2015 Author Posted October 27, 2015 The reason is in the email notification that was sent to you: "Cache frequency monitoring must be enabled in XTU" Quote
MetalRacer Posted October 28, 2015 Posted October 28, 2015 Got it! Thanks for letting me know sooner rather than latter. Quote
Christian Ney Posted October 29, 2015 Author Posted October 29, 2015 (edited) Update to OP: Screenshot: For XTU, CPU Frequency and Cache Frequency Monitoring during benchmark [15.10.15] If the default 5mins is too short, make it 10 or 15. Edited October 29, 2015 by Christian Ney Quote
Splave Posted November 1, 2015 Posted November 1, 2015 okay so CPUZ mem stage, 2% for screen.....so at 4000mhz valid you can make screen at 3920mhz if I understand correctly? Quote
phobosq Posted November 2, 2015 Posted November 2, 2015 CPU-Z 1.73 does not detect memory clocks/timings for me in the end I have a valid with no memory timings. 1.74 works OK. Is it BIOS? I'm on Z170 OCF with 1.43V. Quote
Christian Ney Posted November 2, 2015 Author Posted November 2, 2015 (edited) No, it's not the BIOS, it's because of your CPU. OP updated. CPU-Z version v1.74 allowed only in combination with an i3 Skylake CPU [02.11.15] Edited November 2, 2015 by Christian Ney Quote
phobosq Posted November 5, 2015 Posted November 5, 2015 What about 3d Mark version? It says in requirements "â–»3DMark11 version must be 1.0.132" - I can't find it anywhere, definitely it's not the newest one. Quote
Christian Ney Posted November 5, 2015 Author Posted November 5, 2015 http://www.futuremark.com/benchmarks/3dmark11 "Latest version 1.0.132" http://www.techpowerup.com/downloads/2336/futuremark-3dmark-11-v1-0-132/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.