Guest Bullant Posted June 26, 2016 Share Posted June 26, 2016 Nice Bullant, i've try today 4133 not stable enough to pass waza Inviato dal mio SM-A300FU utilizzando Tapatalk You did good job mate Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 26, 2016 Share Posted June 26, 2016 Bought this motherboard few days ago, in replace of ATX OCF... Im using the same voltages that I used in big one for 4000 c12-12-12-28 2T, but can't make 1T with this voltages, it loads windows but I get BSOD when it has to show desktop. Since there are new voltages on MOCF, do I have to manually set any of them? like VTT DDR... This are my settings right now: Thanks! Quote Link to comment Share on other sites More sharing options...
RULE Posted June 26, 2016 Share Posted June 26, 2016 Try vccio 1.25 - vccsa 1.30/1.35 should be easy 4kc12-1t Inviato dal mio SM-A300FU utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 26, 2016 Share Posted June 26, 2016 Try vccio 1.25 - vccsa 1.30/1.35 should be easy 4kc12-1t Inviato dal mio SM-A300FU utilizzando Tapatalk Thanks... I let VTT DDR on auto? or set it manual? Quote Link to comment Share on other sites More sharing options...
RULE Posted June 26, 2016 Share Posted June 26, 2016 I usualy leave auto And maybe try to boot first 3866 then 4000, help for me. Inviato dal mio SM-A300FU utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 26, 2016 Share Posted June 26, 2016 I usualy leave auto And maybe try to boot first 3866 then 4000, help for me. Inviato dal mio SM-A300FU utilizzando Tapatalk Yeah, got sucessfull boots until 3960, but not at 4000. Thanks again for your help Quote Link to comment Share on other sites More sharing options...
GtiJason Posted June 26, 2016 Share Posted June 26, 2016 . Im using the same voltages that I used in big one for 4000 c12-12-12-28 2T, but can't make 1T with this voltages, it loads windows but I get BSOD when it has to show desktop. Thanks! You might need to raise dram volts, tightening timings makes me have to slightly raise mine. Also some cpu/b die combos need vccio 1.3-1.35v and vccsa 1.35v Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 26, 2016 Share Posted June 26, 2016 You might need to raise dram volts, tightening timings makes me have to slightly raise mine. Also some cpu/b die combos need vccio 1.3-1.35v and vccsa 1.35v Dram volts were ok, raised vccio from 1.25v to 1.3v and worked fine... Thanks for help Quote Link to comment Share on other sites More sharing options...
Guest Bullant Posted June 28, 2016 Share Posted June 28, 2016 Had another play with 5G tonight,all same settings was looking ok but no pass Quote Link to comment Share on other sites More sharing options...
RULE Posted June 29, 2016 Share Posted June 29, 2016 Some Zadak511 action today with ZD4-SHK4133C18-08G Waza stable, but one time board shot down and a couple of times spi window just close by himself. You guys know what means? 1 Quote Link to comment Share on other sites More sharing options...
Strong Island Posted June 29, 2016 Share Posted June 29, 2016 (edited) Some Zadak511 action today with ZD4-SHK4133C18-08G Waza stable, but one time board shot down and a couple of times spi window just close by himself. You guys know what means? wow nice memory, I just got my 4133 c18 yesterday, need to find a matching stick, do you have a lonely zadak stick? If someone has a really nice zadak stick, might be willing to trade my 2 4133 c19 gskill for 1 Edited June 29, 2016 by Strong Island Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted June 29, 2016 Share Posted June 29, 2016 We're all in the same boat, 1 stick each. Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted June 29, 2016 Share Posted June 29, 2016 How did everyone end up with even 1 stick...? Sent from my Nexus 5X using Tapatalk Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 29, 2016 Share Posted June 29, 2016 What max voltage do you recommend to use with TridentZ 3600 C16 B-Die modules on MOCF? used 1.925v for 4080 c12 1t but tertiary timings aren't so good and neither IOLs, so I would like to know how much voltage can I give them without killing anything... Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted June 29, 2016 Share Posted June 29, 2016 How did everyone end up with even 1 stick...? We requested them. Quote Link to comment Share on other sites More sharing options...
rtsurfer Posted June 29, 2016 Share Posted June 29, 2016 We requested them. [emoji33] From where.? Quote Link to comment Share on other sites More sharing options...
dhenzjhen Posted June 29, 2016 Share Posted June 29, 2016 [emoji33] From where.? I'm curious also Quote Link to comment Share on other sites More sharing options...
Strong Island Posted June 29, 2016 Share Posted June 29, 2016 well if anyone wants to turn 1 stick into 2, I have a 4133 c19 gskill kit for straight up trade Quote Link to comment Share on other sites More sharing options...
RULE Posted June 29, 2016 Share Posted June 29, 2016 Greedy guys Just wait is not retail yet. I win 4 more stick during the memory contest, different story. Inviato dal mio SM-A300FU utilizzando Tapatalk Quote Link to comment Share on other sites More sharing options...
Guest Bullant Posted June 29, 2016 Share Posted June 29, 2016 What max voltage do you recommend to use with TridentZ 3600 C16 B-Die modules on MOCF? used 1.925v for 4080 c12 1t but tertiary timings aren't so good and neither IOLs, so I would like to know how much voltage can I give them without killing anything... Just on your rtls and iols is better to lock these in manually,in dram page of bios under the thirds you'll see rtl,iols adjustments ,if your at 4000 12-12-12 memory with correct sub timings you should be setting rtls and iols manually to 50-51-7-7 or 50-50-7-6 and if CPU imc up to it 49-50-6-6 Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 29, 2016 Share Posted June 29, 2016 Just on your rtls and iols is better to lock these in manually,in dram page of bios under the thirds you'll see rtl,iols adjustments ,if your at 4000 12-12-12 memory with correct sub timings you should be setting rtls and iols manually to 50-51-7-7 or 50-50-7-6 and if CPU imc up to it 49-50-6-6 Using 50-51-6-6 right now, got some boots with 50-51-5-5 at 4040MHz but couldn't make those adjustments again so using 50-51-6-6 now. This are my adjustments right now: Until what voltage is it safe? Want to make tertiary timings a little bit tighter if possible, using 1,925v right now. Quote Link to comment Share on other sites More sharing options...
Splave Posted June 29, 2016 Author Share Posted June 29, 2016 We requested them. they only sent you 1 stick? you and rule are the poster boys for zadak least they could do is send you mem Quote Link to comment Share on other sites More sharing options...
Guest Bullant Posted June 30, 2016 Share Posted June 30, 2016 (edited) Using 50-51-6-6 right now, got some boots with 50-51-5-5 at 4040MHz but couldn't make those adjustments again so using 50-51-6-6 now. This are my adjustments right now: Until what voltage is it safe? Want to make tertiary timings a little bit tighter if possible, using 1,925v right now. Yeah cause your using higher mem freq you can run the 50-51-6-6 so going in that you'll be able to run the 49-50-6-6 at 4000mhz mem if you choose too On dram volts i just use 32m as a guide if 1.925v does 12 loops 32m and yiu set 1.94v and it does 20 loops you know it is scaling with volts ,if you then set 1.97v and it fails instant after trying few times you know you know it could know be at its limit ,so your memory will tell you when it's enough Safe volts I have no idea it's up to you,I've not killed no b die yet Edited June 30, 2016 by Bullant Quote Link to comment Share on other sites More sharing options...
Alan_Alberino Posted June 30, 2016 Share Posted June 30, 2016 Yeah cause your using higher mem freq you can run the 50-51-6-6 so going in that you'll be able to run the 49-50-6-6 at 4000mhz mem if you choose too On dram volts i just use 32m as a guide if 1.925v does 12 loops 32m and yiu set 1.94v and it does 20 loops you know it is scaling with volts ,if you then set 1.97v and it fails instant after trying few times you know you know it could know be at its limit ,so your memory will tell you when it's enough Safe volts I have no idea it's up to you,I've not killed no b die yet Ok, thanks a lot! Will install XP on weekend and try... Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted June 30, 2016 Share Posted June 30, 2016 they only sent you 1 stick? you and rule are the poster boys for zadak least they could do is send you mem I'm not mad about it, they also sent me a 3200c16 quad channel kit for x99, 250gb ssd. fatboynotsoslim recieved the same, and lives a 20min drive away, so if I need dual channel I can borrow his. I'm keen to do some more mem frequency testing with this stick, and then I can worry about dual channel testing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.