Alpi Posted September 11, 2019 Share Posted September 11, 2019 Inane work on this board ! 267mhz mem with tight subs are pretty much lead You to max out every chip You just want ! Very nice, very nice ! I'm curious of Your future work, keep pushing ! ;) 1 Quote Link to comment Share on other sites More sharing options...
GRIFF Posted September 11, 2019 Share Posted September 11, 2019 Awesome work. Voltmod of MCP Is need? Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted September 11, 2019 Share Posted September 11, 2019 Nice. You made a mediocre board a superstar. It's awesome. Quote Link to comment Share on other sites More sharing options...
d0minat0r Posted September 11, 2019 Share Posted September 11, 2019 well done! Quote Link to comment Share on other sites More sharing options...
macsbeach98 Posted September 11, 2019 Share Posted September 11, 2019 Nice work Good Show Over the years I have had 2 of these boards and never tried them the lack of 12v CPU power put me off will have to try one oneday. Quote Link to comment Share on other sites More sharing options...
kicsipapucs Posted September 12, 2019 Share Posted September 12, 2019 Wow, that's awesome! Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted September 12, 2019 Share Posted September 12, 2019 Thanks all. I will recheck some of cpus with NF7v2 in next few weeks (NF7 is also strong on fsb and validates 275MHz) to see if Asus board is not limiting me on total cpu clock and will later share my trick to break 260 Mhz with A7N8X. 9 hours ago, GRIFF said: Voltmod of MCP Is need? The resistor I use gives the lowest of 2.05v (that is combo of 2 resistors actually) - going to 2.15v worsens stabilty. I think voltmod is necessary but 2.05v may be unnecessary. 1 Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted September 12, 2019 Share Posted September 12, 2019 (edited) What helps me for stability is modded 3.3V PSU rail and HAL set to "Standard PC". Of course modded bios is a must. Most of my boards don't scale much above 2-2.1V vdd and very often higher voltage hinders the stability. I even have one NF7 that can't do 250+ stable if the vdd is higher than 1.8V. Interested to see if you know something else PS: Try a locked XP 2500+ if you have one. It's cool to beat unlocked CPUs, just because you run much higher FSB Edit: Ah, you have one. Edited September 12, 2019 by I.nfraR.ed Quote Link to comment Share on other sites More sharing options...
TerraRaptor Posted September 12, 2019 Share Posted September 12, 2019 1 hour ago, I.nfraR.ed said: Ah, you have one. I broke the core of the best one this summer, other 2500+ won't go high enough. 1 hour ago, I.nfraR.ed said: Interested to see if you know something else Actually I can share it here - bus 0 dev 0 func 3 offsets 66 and 68 - set both to C7 or 07 (haven't yet bothered to identify the exact bit - although should be simple - just one of those 2 bits in 11xx0111 sequence with xxxx0xxx being mandatory). Don't know what it is exactly - was bruteforcing it in wpcredit - with zero impact on performance. 2 1 Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted September 12, 2019 Share Posted September 12, 2019 (edited) Thanks. Have you checked if those are set differently on other boards? I'm still trying to finish the ZenStates release and then will probably play with K7 and K8 a little. I have DFI Ultra-B, NF7, AN7 - could check on all of them, but it requires some free time. Edited September 12, 2019 by I.nfraR.ed Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted September 12, 2019 Crew Share Posted September 12, 2019 respect bro Quote Link to comment Share on other sites More sharing options...
Tzk Posted September 12, 2019 Share Posted September 12, 2019 Very nice score, well done! Especially on this board... I'm curious what your "trick" to reach 260Mhz+ on the A7N8X is... ;) Quote Link to comment Share on other sites More sharing options...
Sparks.nl Posted September 12, 2019 Share Posted September 12, 2019 Very nice score. My board back then didn’t even come close... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.