December 23, 201311 yr stay away from Dimas SS , they have very very very tiny evaporators like a coin =))) can´t hold load very well , except you will recive the unit over 1-2-3 month´s ...lot of people have a bad experience with dimas shipping including me Edited December 23, 201311 yr by nachtfalke
December 23, 201311 yr So which would be best to buy then? A mach 2 or something alike from Piotres or something else entirely?
December 23, 201311 yr a custom made SS would by for sure the best choice , ask Piotres or another ss builder(bartx).
February 3, 201411 yr Anyone have experience with this pot? It would be $212 shipped. Good deal? It would be used for DICE until I can afford/find a dewar. http://www.piotres.com/?go=4,ln2,000039,cpu_copper_semi_solid_container__70_54mm_diameter_,
February 3, 201411 yr Anyone have experience with this pot? It would be $212 shipped. Good deal? It would be used for DICE until I can afford/find a dewar. http://www.piotres.com/?go=4,ln2,000039,cpu_copper_semi_solid_container__70_54mm_diameter_, Just buy ln2 pot, there is no sense to buy DICE pot.
February 4, 201411 yr You can use almost every LN2 also for DICE. As long as they don't leak the acetone everything is fine.
April 4, 201411 yr Hey guys, Looking to go sub-zero shortly so i've been doing a little window shopping for cpu pots. Still at the early stages of research but thought i'd ask the experienced guys to get an opinion/advice! Pot's seem to vary quite a bit with different guys/company's producing more than just one pot, from this i gather some are suited to some applications better than others. I've picked up on some prefer one pot for 'x' and another for 'y'. So, what are the differences between pots? i.e, does it depend on hardware being used (in my case haswell/ivy-e for now), or way they holds temps etc etc. I'm sure a lot of it is down to personal preference but a quick run down of the fundamentals would be greatly appreciated!
April 4, 201411 yr I guess you want to go for LN2? Or just dice? Like you already noticed 99% is just about the personal preference and not the real performance. If you are benching with a CB-CPU (Haswell) it depends whether you like fast reaction or more a huge mass for buffering and less temperature ups-and-downs. For CB-free CPUs like Ivy-E you need a pot which has a good surface to reach the lowest temperature possible. However there are some CPUs which have a CB at about -185°C so it can happen that you run into a coldbug after load on the CPU. E.g. when a benchmark-run is over. Xtreme Addict can probably tell more about this. You can actually buy any of the latest pots as they are all really good. No matter if EK-Waterblocks, KPC or my stuff. Just go by price, shipping-costs, mounting mechanism, accessoires and style.
April 4, 201411 yr LN2. I think as a first timer steady temps would be the way to go, having more control seems like a bonus. In fact that poses the question, why would you want less control and faster reaction? So where does the Fusion fit into the grand scheme of pots in that repsect? Hmm, that's one thing i didn't even contemplate, when load is off! I'll need to go read a few threads and soak up as much info as i can! Nice website btw.
April 4, 201411 yr Faster reaction helps when you have (E.G.) no CB but CBB at -120c. Personal pref and benching style will affect what pot you like the most. There are some pots I just can't get to grips with no matter how many times I try it and there are some I can get something useful out of after the first 30 minutes of using one. No doubt some people can feel at home with any pot in front of them. Pffffft sluts Edited April 4, 201411 yr by K404
April 4, 201411 yr As Kenny said, a faster reaction is much better for CPUs with no cold bug. I've been conaidering getting a Venom for my AMD cpus since they are apparently meant to be perfect for full pot benching. Edited April 4, 201411 yr by ObscureParadox
June 8, 201410 yr how much artists eraser should i buy?! also der8aeur are shipments still happening from your site, need some insulation materials
June 8, 201410 yr Yes shop works fine! Orders will be delayed tho at the moment because I am still in Taipei.
September 19, 201410 yr I know that it might be not a proper place, but I'd like you to warn you with doing buisness with ryba. I've ordered mouting kits for about ~100 euro - I'm still waiting from 2 months and nothing. He took my money and now he's not responding anymore. Be careful doing business with him and don't pay all money in advance like I did... Anybody experienced problem with him?
September 20, 201410 yr I know that it might be not a proper place, but I'd like you to warn you with doing buisness with ryba. I've ordered mouting kits for about ~100 euro - I'm still waiting from 2 months and nothing. He took my money and now he's not responding anymore. Be careful doing business with him and don't pay all money in advance like I did... Anybody experienced problem with him? His reputation is at an all time low, http://forum.hwbot.org/showthread.php?t=109616
January 31, 20178 yr Anyone know where i could still grab a koolance pot from? Sent from my iPhone using Tapatalk
March 21, 20214 yr Does anyone here have any idea where to get LN2 pot for cpus and gpus? The only thing I found is the kingpin shop. But there are only CPU pots there. I would like to try dry ice first, but without hardware it's just bad ...
March 21, 20214 yr 2 hours ago, maddin-6616 said: Does anyone here have any idea where to get LN2 pot for cpus and gpus? The only thing I found is the kingpin shop. But there are only CPU pots there. I would like to try dry ice first, but without hardware it's just bad ... https://bartxstore.com/product-category/extreme-cooling/ https://www.burningoc.de/reaktor https://shop.bitspower.com/index.php?route=product/category&path=68_356 I think those are the only sellers currently, but its always an option to try finding a used LN2 pot as well
March 22, 20214 yr Thanks for the help!!! I would also like to buy used pots. If someone has something to sell, he can offer it to me.
April 13, 20214 yr Think about to buy used pots from HWbot maket for start is enough if you like OC after you can buy brand new with little better performance.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.