Xtreme Addict Posted July 8, 2012 Share Posted July 8, 2012 I had one - shit Quote Link to comment Share on other sites More sharing options...
Splave Posted July 8, 2012 Share Posted July 8, 2012 I have a question for you guys... What settings are you changing in BIOS to bin chips? On my L204B321, the only settings I changed were dram voltage and vcore for 6.3. Everything else was left on auto... I tried changing other settings, but it seemed to make no difference on my chip for max cpuz. Are you guys changing anything other than vcore when testing for max cpuz? Great volts! I use 1.25vCCSA 1.25vCCIO 1.7vPLL Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted July 8, 2012 Crew Share Posted July 8, 2012 Vivi I have a 6.9ghz chip you can have just pm Made you flinch oooooh you got me LOL. taste of my own medicine! Has anyone tested a cpu that does below 1.3v for 5ghz and NOT reach 6.5 - 6.6+ Quote Link to comment Share on other sites More sharing options...
DrWeez Posted July 8, 2012 Share Posted July 8, 2012 Has anyone tested a cpu that does below 1.3v for 5ghz and NOT reach 6.5 - 6.6+ Yes, L221A997 50x100 @ 1.3v and 6450 @ 1.89 4c4t to much heat when trying to going higher. with some fine tuning _maybe_ 50 to 100 mhz more but not worth the effort Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted July 8, 2012 Crew Share Posted July 8, 2012 Yes, L221A997 50x100 @ 1.3v and 6450 @ 1.89 4c4t to much heat when trying to going higher. with some fine tuning _maybe_ 50 to 100 mhz more but not worth the effort damn i wanted to get excited when i got 1.3v 5ghz air chip :< Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted July 8, 2012 Share Posted July 8, 2012 I use1.25vCCSA 1.25vCCIO 1.7vPLL Thank you. I'm going to keep doing what I've been doing, but will try that as well to see if it makes any difference. I found LN2 mode on MVG or not, I have the same clocks on my L204B321 (6.3GHz). LN2 mode increases the "auto" voltages on various things, so I've run non-LN2 mode to take it easy on the chip. I haven't messed with memory settings much to see if the other voltages would help memory speeds, but for core frequency alone, the only thing that made any difference for me was vcore. Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted July 8, 2012 Crew Share Posted July 8, 2012 Do you guys see any difference in Pastes with these CPU's? i mean ofcourse GTX 580 requires awesome paste, but how about these CPUs? what is your take Quote Link to comment Share on other sites More sharing options...
G81 Posted July 8, 2012 Share Posted July 8, 2012 (edited) I had one - shit L221a971 #1 : Pass 32m 4core with HT @ 1.4 - no Different 4-4 or 2-2 #2 : fail #3 : fail again #4 : Pass 32m 4core with HT @ 1.39 - no diffrent 4-4 or 2-2 core Last One : Pass 32m 4Core with HT @ 1.38 - and on 2-2 Core can done 32m on @ 1.34 Mb > UD3H Edited July 8, 2012 by G81 Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted July 9, 2012 Share Posted July 9, 2012 (edited) This was 3218B958: CBB at -105C, coldbug at -117C. First tried the exact profile which worked fine for my 6.3GHz L204B321, then did the following trying to eliminate cold bug. Tried 1.25V VCCSA and VCCIO, 1.6V to 1.7V core, 107.5-112.2MHz bclk, 2c/2t-4c/8t, high ram freq (2700) to low freq (2100). Tried keeping it loaded with sp32m, tried ucbench, wprime, nothing has any difference on when the CB hits. Best I saw on the chip was 6.1GHz+, at 1.7V -105C... So it isn't a bad chip, probably even a pretty solid DICE chip, but the cold limit puts a major damper on things. Only ran it for about an hour. Gonna try 3218B957 tomorrow, hoping for better luck. Edited July 9, 2012 by I.M.O.G. Quote Link to comment Share on other sites More sharing options...
Radi Posted July 9, 2012 Share Posted July 9, 2012 my 3218b is very bad ! boot 50*100 for 1.4 and run 32m with 1.4 too . don't boot with less voltage Quote Link to comment Share on other sites More sharing options...
Splave Posted July 9, 2012 Share Posted July 9, 2012 Do you guys see any difference in Pastes with these CPU's? i mean ofcourse GTX 580 requires awesome paste, but how about these CPUs? what is your take I like Gelid for everything, people say its expensive but you dont really use that much on the processor... I.M.O.G. Didnt you have a strange low CB chip before too? sure its not your board? Quote Link to comment Share on other sites More sharing options...
Calathea Posted July 9, 2012 Share Posted July 9, 2012 I had a lousy evening with ln2 yesterday, but tested the 1.35 volt 3570k on littledevil SS -55 today: http://valid.canardpc.com/show_oc.php?id=2433991 3218B594 cpu. Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted July 9, 2012 Share Posted July 9, 2012 I.M.O.G. Didnt you have a strange low CB chip before too? sure its not your board? I had 3 with low cold bugs, couldn't believe it so I then bought a 2nd MVG, and found it was the 1st MVG that was causing the problem, and that my 3rd chip was a decent one (6.3GHz) and there was no coldbugging. My first 2 chips might have been fine too, but I sold each one to buy the next one and never got to test them on a good board. So I have a known good MVG now, and a known good L204B321. The 3218B958 yesterday coldbugged - either its the chip, or something went bad with my board/insulation. I'm going to test my next CPU (3218B957) today, and if it coldbugs as well... Then I'll put the L204B321 in and see if that still works without any problem. Quote Link to comment Share on other sites More sharing options...
Splave Posted July 10, 2012 Share Posted July 10, 2012 I dont believe in batches but got these 3 from $uperbiiz 3219B383 x2 3218c102 Testing today Quote Link to comment Share on other sites More sharing options...
Splave Posted July 10, 2012 Share Posted July 10, 2012 3218c102 needs 1.35v to boot 5ghz 4c8t First 3219B383 looks promising, 1.24v boot 5ghz LLC set to high Hope it scales with cold, picking up juice right now then will test the other on air and get to work Quote Link to comment Share on other sites More sharing options...
M.Beier Posted July 10, 2012 Share Posted July 10, 2012 3218c102 needs 1.35v to boot 5ghz 4c8t First 3219B383 looks promising, 1.24v boot 5ghz LLC set to high Hope it scales with cold, picking up juice right now then will test the other on air and get to work Splavestar, can you please give heads up on IMC? Just got myself a new chip today, will test it in 3 hrs... 3218C021, Costa Rica. Quote Link to comment Share on other sites More sharing options...
Splave Posted July 10, 2012 Share Posted July 10, 2012 Splavestar, can you please give heads up on IMC?Just got myself a new chip today, will test it in 3 hrs... 3218C021, Costa Rica. 2600mhz strap works no problem which is a good sign hehe Quote Link to comment Share on other sites More sharing options...
Viss Posted July 10, 2012 Share Posted July 10, 2012 Promising chip Allen looking forward to the cold numbers! Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted July 10, 2012 Share Posted July 10, 2012 3218B957 doing the same thing as 3218B958 - crap. Warming it back up, tearing down, and putting known-good L204B321 back in to see if its the board or the chips. Quote Link to comment Share on other sites More sharing options...
Splave Posted July 10, 2012 Share Posted July 10, 2012 hope its your board bro @viss thanks mate! Quote Link to comment Share on other sites More sharing options...
I.M.O.G. Posted July 10, 2012 Share Posted July 10, 2012 (edited) Back on the L204B321, cold bug a bit below -110C. Another crippled Asus MVG... Ran great for about a month. I don't think I even want to subject myself to Asus RMA process. I'll probably eat the $400 in crap boards and just get something that hopefully doesn't fail after a few weeks. On the upside, hopefully one of these other chips I have here don't suck on whatever board I run next. Wasted 3 months now on Asus junk, and overall my Ivy Bridge experience has been nothing short of insanely frustrating as a result. Edited July 10, 2012 by I.M.O.G. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted July 10, 2012 Share Posted July 10, 2012 When 30x memory divider works, is that because cpu is good ? Even if 29.33 and 28x seems to be better choice. Didn't boot that much with 30x divider though, dunno if cpu limitation or actually bios/board limitation Quote Link to comment Share on other sites More sharing options...
M.Beier Posted July 10, 2012 Share Posted July 10, 2012 Back on the L204B321, cold bug a bit below -110C. Another crippled Asus MVG... Ran great for about a month. I don't think I even want to subject myself to Asus RMA process. I'll probably eat the $400 in crap boards and just get something that hopefully doesn't fail after a few weeks. On the upside, hopefully one of these other chips I have here don't suck on whatever board I run next. Wasted 3 months now on Asus junk, and overall my Ivy Bridge experience has been nothing short of insanely frustrating as a result. MVG has great effeciency, unfortunately they are quite fragile, and tend to eat processors for breakfast. Quote Link to comment Share on other sites More sharing options...
M.Beier Posted July 12, 2012 Share Posted July 12, 2012 (edited) Finallllyyyyyyyy !!!! 5th chip, finally above average!!! Batch; 3218C021 5ghz 1.304v 4/4 5ghz 32M (Not tried with HT enabled, yet.... Next step is 5.1ghz test...) Not tested IMC yet, hope it isnt crap, one step at the time, one step at the time! EDIT-1; 5100mhz 32M passed 1.41v EDIT-2; 5200mhz 32M passed 1.5v (1.485v crashed in 23th loop, grr) Jeeeeez forum is SLOW... MASSMAN you are IMPROVING your RUNNING times, PLEASE improve forum speed! Edited July 12, 2012 by M.Beier Quote Link to comment Share on other sites More sharing options...
M.Beier Posted July 12, 2012 Share Posted July 12, 2012 3218C01XX is MONSTER-BATCH! Just found 3218C017 #1061 (bought tray) 5 GHZ @1.288V 5.1 GHZ @1.384V 5.2 GHZ @1.45V but getting too hot (app crash loop12@76°C...don't wanna fry this baby...) I think 5 GHZ low voltage chips are running really good under LN2 almost always as long as you don't hit any MHZ-wall. I have heard of this now a couple of times... 1.375V are still pretty good(!!!) 6.6GHZ @1.75V LN2 for such a chip...but very "wally" after that voltage on this certain example. I have some same week chip with 1.45V here - as long as it scales I don't mind Sweet SoF, you ran all with 2C? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.