Jump to content
HWBOT Community Forums

Ivy Bridge 3570K/3770K Batch and Serial Numbers


Massman

Recommended Posts

3218C01XX is MONSTER-BATCH!

 

Just found 3218C017 #1061 (bought tray)

5 GHZ @1.288V

5.1 GHZ @1.384V

5.2 GHZ @1.45V but getting too hot (app crash loop12@76°C...don't wanna fry this baby...)

 

32m_5100_3218c017_monsters.jpg

 

I think 5 GHZ low voltage chips are running really good under LN2 almost always as long as you don't hit any MHZ-wall.

I have heard of this now a couple of times...

 

1.375V are still pretty good(!!!) 6.6GHZ @1.75V LN2 for such a chip...but very "wally" after that voltage on this certain example.

I have some same week chip with 1.45V here - as long as it scales I don't mind :D

 

6.7 - 6.8 Detected chip....nice one..

 

my chip on air cooling 5 Ghz just need 1.235 volt 4C/8T L215B

Link to comment
Share on other sites

3220B691: crap.

 

It does appear to run cool though.

 

 

Question (for everyone)! At 5GHz, What kinda temps are people seeing, both idle and load? (also need to know how many cores)

Edited by K404
Link to comment
Share on other sites

Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load.

 

I got a 3218B to do this on aircooling, but it was not binned by myself.

http://valid.canardpc.com/show_oc.php?id=2439486

http://valid.canardpc.com/show_oc.php?id=2437518

But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330.

Edited by TaPaKaH
Link to comment
Share on other sites

Depends on the cooling. With something like TRUE the 1.3V chips are usually around high-30ies idle, high-50ies load and 1.4V chips are ~40 idle and low-70ies load.

 

I got a 3218B to do this on aircooling, but it was not binned by myself.

http://valid.canardpc.com/show_oc.php?id=2439486

http://valid.canardpc.com/show_oc.php?id=2437518

But for some reason, the chip won't pass 32M at 1400 or HCI memtest above 1330.

 

Hmm, either I am doing it WRONG, or those load temps cant be true.... 1.25v = 70C+ here.... 4.7ghz p95 12-12 AVX.

Link to comment
Share on other sites

 

 

 

Intel Europe (or Germany not sure where they send the chips in the end) out of RMA-CPUs for 1-2 weeks LOL...

 

Just got an email today, stock now pushed out until 7/24/12. At this rate I'll get the other 3 RMA'd about the same time as the next architecture release...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...