l0ud_sil3nc3 Posted January 14, 2013 Share Posted January 14, 2013 1.96v a few hours of cold 1 Quote Link to comment Share on other sites More sharing options...
Massman Posted January 14, 2013 Share Posted January 14, 2013 Seems like you have a bit of memory on your snow Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted January 14, 2013 Author Share Posted January 14, 2013 Seems like you have a bit of memory on your snow 1 Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted January 14, 2013 Share Posted January 14, 2013 I have a set of 2400C8 myself, but it's not too nice under cold. What were the 'actual' memory temperatures in your runs? Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted January 14, 2013 Author Share Posted January 14, 2013 I have a set of 2400C8 myself, but it's not too nice under cold.What were the 'actual' memory temperatures in your runs? -50c to -70c since I was lazy and just set the Triple Point on the dimms, no plates but I can see the plates making a huge difference since I was running full pot to get those temps. The K probe was attached to heat sink of one of the dimms. Quote Link to comment Share on other sites More sharing options...
phil Posted January 14, 2013 Share Posted January 14, 2013 Nice work George.And great pictures :celebration: Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted January 14, 2013 Author Share Posted January 14, 2013 ^thanks Phil will test 2x2GB Flares 2000c7 as they seem to like volts so I have a feeling they will scale with cold a bit better than these, could just also be 4x2GB holding me back. 1 Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted January 14, 2013 Share Posted January 14, 2013 do you have an ASUS board to try 1333+ CL6? Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted January 14, 2013 Author Share Posted January 14, 2013 do you have an ASUS board to try 1333+ CL6? Yes I do have a MVF that I will try them in later, but first I want to give 2x2GB a shot on either one before revisiting full bank. Quote Link to comment Share on other sites More sharing options...
bob80 Posted January 15, 2013 Share Posted January 15, 2013 Very very nice memory Which kind of ICs do they use ? Quote Link to comment Share on other sites More sharing options...
Stelaras Posted January 15, 2013 Share Posted January 15, 2013 Nice performance George !!! Quote Link to comment Share on other sites More sharing options...
Splave Posted January 15, 2013 Share Posted January 15, 2013 sweeeeeet Quote Link to comment Share on other sites More sharing options...
zeropluszero Posted January 15, 2013 Share Posted January 15, 2013 very Very Nice Memory Which Kind Of Ics Do They Use ? Psc. Quote Link to comment Share on other sites More sharing options...
Hiwa Posted January 15, 2013 Share Posted January 15, 2013 Did u tried twcl 6 ? mine can't do it when +2600 cl7 Quote Link to comment Share on other sites More sharing options...
teurorist Posted January 15, 2013 Share Posted January 15, 2013 6 16.4 is the goal but nice pictures Quote Link to comment Share on other sites More sharing options...
SF3D Posted January 15, 2013 Share Posted January 15, 2013 Very good efficiency! Try with the plates please Quote Link to comment Share on other sites More sharing options...
Xtreme Addict Posted January 15, 2013 Share Posted January 15, 2013 Strong results Quote Link to comment Share on other sites More sharing options...
Splave Posted January 15, 2013 Share Posted January 15, 2013 those are some rare ass sticks man 1 Quote Link to comment Share on other sites More sharing options...
TaPaKaH Posted January 15, 2013 Share Posted January 15, 2013 you can buy these in TW for ~$650 per kit if you REALLY want it 1 Quote Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted January 15, 2013 Author Share Posted January 15, 2013 Nice performance George !!! thanks man sweeeeeet ditto to you mr Did u tried twcl 6 ? mine can't do it when +2600 cl7 twcl 6 @ 2600 c7 would complete the first four iterations and then not exact in round, but it is faster for sure at that speed, voltage did not help either (2.0v tested with no difference) 6 16.4 is the goal but nice pictures I know right, not sure why not in the low 17's with full bank and those timings, must be my wazza/os I think. Strong results Not quite as strong as your LN2 memory run, that was very sick you have an excellent chip. you can buy these in TW for ~$650 per kit if you REALLY want it ha that's what they cost brand new from Newegg at launch crazy they are still so high. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.