July 30, 201311 yr L311B512 1.41V 5GHZ. ln2 6.05 cinebench 6.3, 2D (-120) seems need to find scaling batch too, not just good volt HI ViVi, Noted thanks
July 30, 201311 yr i5-4670K Batch: L312B140 Max Clock 6300 MHz Max Clock SuperPi1M: 6200 MHz 4000 MHz @ 1,010 V (primestable) 4600 MHz @ 1,230 V (primestable) 5000 MHz @ 1,290 V (SuperPi32m 4C4T) i7-4770K: Batch: L313B996 Max Clock: 5800 MHz Max Clock SuperPi1M: 5700 MHz 4000 MHz @ 1,145 V (primestable) 4300 MHz @ 1,295 V (primestable) 5000 MHz not possible below 1,40 Volt
July 30, 201311 yr i5-4670KBatch: L312B140 Max Clock 6300 MHz Max Clock SuperPi1M: 6200 MHz 4000 MHz @ 1,010 V (primestable) 4600 MHz @ 1,230 V (primestable) 5000 MHz @ 1,290 V (SuperPi32m 4C4T) i7-4770K: Batch: L313B996 Max Clock: 5800 MHz Max Clock SuperPi1M: 5700 MHz 4000 MHz @ 1,145 V (primestable) 4300 MHz @ 1,295 V (primestable) 5000 MHz not possible below 1,40 Volt CB?
July 31, 201311 yr QE6V 4670K ES http://valid.canardpc.com/show_oc.php?id=2877806 idle 44-48c with corsair h100 at full speed. roomtemp about 25-27c
July 31, 201311 yr Haven't got the chance yet to do it. When I do, I'll let you know. I have to for the 06 dual gpu cup anyways.
July 31, 201311 yr Haven't got the chance yet to do it. When I do, I'll let you know. I have to for the 06 dual gpu cup anyways. thanks man this chip got a real good imc i think, 4.7gig easy boot with 1.3v vring, not bench stable though.. 4600/4600 / 2400 c6 1.24v/1.3v/1.88v is superpi 4m stable. tomorrow further memory testing then hopefully ln2 sessions on friday and saturday. it feels like a good chip to me. L251A899 very early batch .. http://valid.canardpc.com/show_oc.php?id=2877862 nearly forgot this,with updated X01 bios and properly working oc buttons on the z87x-oc board. 5.1gig valid almost succeed,but not, soo 5gig is possible with lower voltage. Edited July 31, 201311 yr by subaruwrc
August 1, 201311 yr On my 4670K I could do 5.1Ghz 1m un on air. Max tho, barely made it with the M6E and slowmode for saving it. 5GHz shouldn't be a problem.
August 2, 201311 yr On my 4670K I could do 5.1Ghz 1m un on air. Max tho, barely made it with the M6E and slowmode for saving it. 5GHz shouldn't be a problem. benching this shit right now 6.2 valid 1.87v 5.8 32m barely with 1.87v -115c cb awwwyeah
August 2, 201311 yr Mine did 5.8 1M on -70°C dice... I hope it doesn't have a terrible CB (L310B492) well my cpu had a quite good delta between the thermometer readout and realtemp monitoring ( 20C delta ) so this -115c -120c coldbug is about -95-100C coldbug on the cores or the vrm, LOL it hurts ...
August 2, 201311 yr back down on the volts.. ES I had did 6000 wprime 1024 with 1.65V ES in general don't need that much vcore
August 2, 201311 yr back down on the volts.. ES I had did 6000 wprime 1024 with 1.65V ES in general don't need that much vcore this one needs it. 6000mhz validation requires 1.79v ..
August 7, 201311 yr Crew hahaha loud, my L316B was the worst cpu i ever tested, 4.5ghz max on cinebench. So i will not be touching it again
August 8, 201311 yr L310B491 is a not bad batch to look for. It scales with cold and handpicking on AC seems to be the write method for this batch. 5 GHz 4/8 @ 1.35v @ 6.7 GHz CPU-Z one core, 1 core boot 6.5 GHz @ 1.9v to OS, can't run spi 32M 5 GHz 4/8 @ 1.275v @ CPU-Z not tested though, but boots 6.5 GHz 4 core @ 1.8v and enters OS and runs SPI 32M from this batch cpu which can't do 5 GHz 4/8 air is a very bad one on LN2 Have fun! BTW But this batch is fragile so be gentle with those cpus
August 8, 201311 yr L314B506 air (deepcool frostwin) Cpu voltage 1.26, frequency - 4.7 GHz (4/8), ring freq - 4GHz, vccin - 1.8, ring voltage -1.035, vccsa - 0.92.
August 12, 201311 yr this chip got a real good imc i think, 4.7gig easy boot with 1.3v vring, not bench stable though.. 4600/4600 / 2400 c6 1.24v/1.3v/1.88v is superpi 4m stable. L251A899 http://valid.canardpc.com/show_oc.php?id=2877862 nearly forgot this,with updated X01 bios and properly working oc buttons on the z87x-oc board. 5.1gig valid almost succeed,but not, soo 5gig is possible with lower voltage. Ln2 http://valid.canardpc.com/show_oc.php?id=2887397 benchable at 5.7-5.8 max with 1.85v + ..
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.