GPU Overclocking and Tweaking

How will OC go when we have the series of Nvidia 5000 GPU's that use AI to preempt the graphics ?

Hi all! I have a strange problem with a card, i'm hoping to get some info or ideas. It has the solder holes for an 8-pin power plug, but only a 6-pin plug was installed at the factory. I get the above error message before proper POST. vCore is present. I have tried shorting the other 2 pins and I have tried wiring them to the appropriate 2 pins of an 8-pin power plug. Same error message. The PC has booted to Windows literally twice with this card installed, which makes me wonder if there's a bad connection somewhere but i've not been able to find it. How does the card/BIOS decide that the power cable is unplugged? Do false p…

Edit: sourced the files elsewhere. can close the thread thanks

Hi friends, i have a small problem. i buyed 3 GTX 285. Every card works fine. The next step is to activate 2way sli and 3 way sli. But its not possible in the nvidia control panel. The options dont exsits. I use a Crosshair iv formula and win 7 64 bit. I tried many drivers': 260, 284, 309, 342 but nothing works. I also treid many Slibridges. Can someone help me?

Anyone have the modded Nvidia drivers for 980 Ti and Win XP? 368.81 Pretty please with sugar on top.

Hy guys, I have issues to install Nvidia drivers on B550-E GAMING mboard with Windows 7 and 2 x GTX 580; there is any tips? I install drivers 337.88 and 378.92 successfully , GPU-Z saw both VGA but on Nvidia panel there isn't SLI option to enable. Why ? Thanks to all Andrix85

NVIDIA_15_LODS.rar

(narrative) This card has threads all over the net about its inability to work at factory Boost speeds....or even factory base clock. Apparently the first batch are the worst and they can be identified by the lack of backplate. I picked up one of these and got stuck into figuring out why they suck (sorry, eVGA) A lot of comments online pointed towards the HDMI firmware and i'm certain that a % of people fixed their problem using the HDMI firmware patch from nVidia. The MHz issues are real, though. Online comments talking about hacking the MHz away until the card is running nVidia's basic profile of 1126MHz. The finger was pointed at the eVGA Boost tabl…

Hello all! I have encountered this lovely message for the first time. In-Windows attempts have been done with the card (GTX980) disabled in device manager. I've tried nVFlash 5287 (certificate bypass) and 5.59 board ID mismatch patch. Does anyone have any ideas on how to get around this?

Hi guys , where its the problem ?

Technically, this is not about overclocking, but I figured I'd ask here anyway. I got a batch of dead GPUs. Some seem more dead than others, and I suspect that some of them have faulty VRAM. Once in a while I find cards that run less unstable when underclocking the memory, which is not important for my use anyway (Folding@Home). So, the question is, are there people out there who could modify RTX 20x0 BIOSes to run the VRAM, say, on half speed compared to stock? if I could get a couple of them to run reasonably well, I'd be very happy.

Hi i am looking for a vbios whic has the most open power and voltage limit to get the most out of this card any leads/help is greatly apprciated i used to have a asus xoc vbios on my old MSI GTX 1080ti Gaming X Trio and it worked perfectly this card is obisly dual bios soo bricking isent realy an issue im just curious if anyone has tested some that works great on this type of cards.

Hi, I was wondering if I can do shunt mod and do some capacitors. Would it make difference or not?

Does anyone has a picture of the OVP mod for the X1950 GT/Pro? Thanks in Advance

Looking for a nvflash for Riva 128 (ASUS V3000). Can anyone help?

Hello , I need help for overclocking my first 2080 Ti. I has buy it , I download XTuner from Galax. But how can see the clocks on 3D , I dont use msi afterburner. I need check my clocks and voltaje , for sure the new clocks at working. Thanks on advance.

In the middle of an evbot flash using 1080to kp I lost power, now its bricked. the screen I black any ideas how to force flash anyone? Cheers

When I overclock my intel igp on m9a and m10a I'm limited to 1.7v for both core and igp until you enable ln2 mode. However the igp is disabled in ln2 mode to prevent damage from cold bug killer volts. As I understand there were special bioses for the GOC comps that allowed full voltage control without disabling the IGP. Does anyone have a copy for m10a and m9a that they'd be willing to share or know where they are hosted?

Hi guys, looking for some advice from the electrical engineers in here My friend has shipped me her Titan Xp which has died in her as she stated she'd knocked a cap off and it stopped working. I have replaced the capacitor and its still not booting, not even getting power to the core itself. Are there any common faults I can look up with these cards or like I already assume is the card more than likely done with? Any advice on where to start would be appreciated