Massman Posted June 11, 2014 Author Share Posted June 11, 2014 Good call! I've updated the title of the stage. It's 3DMark03 Quote Link to comment Share on other sites More sharing options...
Tech Tweaker Posted June 11, 2014 Share Posted June 11, 2014 Good call! I've updated the title of the stage. It's 3DMark03 Looks like everyone that submitted made a mistake then, because all of the current submissions are under 3DMark2001 SE. Quote Link to comment Share on other sites More sharing options...
Massman Posted June 11, 2014 Author Share Posted June 11, 2014 Oh ... In that case, let's make it 3DMark01. No harm done ... everything updated! Quote Link to comment Share on other sites More sharing options...
mr.paco Posted June 14, 2014 Share Posted June 14, 2014 If I may; a query regarding The DX11 PCI challange; There is only one PCI ran on that bench ever made. I know PCI cards are not a popular HW to use but I would think that with just under 40,000 benchers there would be more than just one And that one run is questionable as pointed out by Strunkenbold. http://hwbot.org/submission/2280939_ Could there have been an error made when it was submitted. Or am I completely wrong and DX11 can run on a PCI card. If I am wrong; Pardon my ignorance If it is wrong; Since no submissions have been made yet, change to DX9 or whatever. Quote Link to comment Share on other sites More sharing options...
Massman Posted June 15, 2014 Author Share Posted June 15, 2014 Should be possible to run DX11 on a PCI card: http://www.geek.com/chips/zotac-launches-pci-directx-11-graphics-card-for-legacy-systems-1425207/ http://www.hisdigital.com/us/news_show-158.shtml Quote Link to comment Share on other sites More sharing options...
Bones Posted June 15, 2014 Share Posted June 15, 2014 I too believe it's possible BUT how many PCI based cards can actually run it? I woudn't believe too many could since PCI cards based on a much older style slot are being phased out in favor of PCI-E slotted cards and production of PCI cards isn't what it used to be by any means over the last few years at least. That would mean the PCI based models capable of it will be very few so pickings of what cards available to use might pose a problem if really wanting to go for it in this category, esp if having to shop around for one. Maybe some folks here could do some testing and see because I just don't see the playing field within this category being too competitive as it looks ATM. I could be wrong and maybe there are several that can and I do understand that but believe it is a valid question to be asked as in "Are you sure about this" or somewhere along those lines from a competitive standpoint. Hoping I'm wrong and maybe things will turn out it won't be a real problem with it. Quote Link to comment Share on other sites More sharing options...
mr.paco Posted June 15, 2014 Share Posted June 15, 2014 Should be possible to run DX11 on a PCI card:l Thanx for the response; If it were easy it wouldnt be fun . I'll keep at it Thank you Quote Link to comment Share on other sites More sharing options...
Marquzz Posted June 15, 2014 Share Posted June 15, 2014 There are a few dx11 cards out there; GT 4xx/5xx/6xx and Radeon 5450 as mentioned. I think that's at least one in every team. Quote Link to comment Share on other sites More sharing options...
Moose83 Posted June 15, 2014 Share Posted June 15, 2014 Is extra gpu allowed for the Kabini stage? Quote Link to comment Share on other sites More sharing options...
Massman Posted June 16, 2014 Author Share Posted June 16, 2014 Yes Quote Link to comment Share on other sites More sharing options...
I.nfraR.ed Posted June 21, 2014 Share Posted June 21, 2014 (edited) My bench SATAIII SSD died while running kabini @ 134MHz FSB . It's really the SSD and not the controller, because it is not detected on my main machine too. No way to copy the scores either. Edited June 21, 2014 by I.nfraR.ed Quote Link to comment Share on other sites More sharing options...
xgamespati Posted June 22, 2014 Share Posted June 22, 2014 can i use 610m? Quote Link to comment Share on other sites More sharing options...
Massman Posted June 22, 2014 Author Share Posted June 22, 2014 No, just the cards in the list Quote Link to comment Share on other sites More sharing options...
Calathea Posted June 22, 2014 Share Posted June 22, 2014 My bench SATAIII SSD died while running kabini @ 134MHz FSB .It's really the SSD and not the controller, because it is not detected on my main machine too. No way to copy the scores either. Pci-e locked to fsb then, just as crappy fm2 that stuff kills ssd and hdd. Quote Link to comment Share on other sites More sharing options...
TASOS Posted June 23, 2014 Share Posted June 23, 2014 If I may; a query regarding The DX11 PCI challange;There is only one PCI ran on that bench ever made. I know PCI cards are not a popular HW to use but I would think that with just under 40,000 benchers there would be more than just one And that one run is questionable as pointed out by Strunkenbold. http://hwbot.org/submission/2280939_ Could there have been an error made when it was submitted. Or am I completely wrong and DX11 can run on a PCI card. If I am wrong; Pardon my ignorance If it is wrong; Since no submissions have been made yet, change to DX9 or whatever. The above result is submitted in wrong category. That card sure is a pci-e version. There is NO sapphire 5450 pci , with 1GB ram. and sure doesnt look like a low profile pci card , in the photo. A result moderator must edit it. . Quote Link to comment Share on other sites More sharing options...
GENiEBEN Posted June 23, 2014 Share Posted June 23, 2014 OK. Quote Link to comment Share on other sites More sharing options...
Aleslammer Posted June 24, 2014 Share Posted June 24, 2014 Been through Heaven D11 with a PCI 5450 didn’t get a score monitor doesn’t support 1680 x 1050 (as I remember) had the same problem with a 5770 the only other time I’ve ran the bench. As for cards the Egg only has two available based on the Nvidia 610 & AMD 5450, don’t know if there are others elsewhere so generally sounds very limited. Quote Link to comment Share on other sites More sharing options...
MrBreeze Posted June 26, 2014 Share Posted June 26, 2014 I'm thinking of making a sub in this category (PCI Heaven extreme) but don't want to put in the time if the rules are going to change. Can Massman or other staff confirm that we are sticking w/ current rules for this stage? Quote Link to comment Share on other sites More sharing options...
der8auer Posted June 26, 2014 Share Posted June 26, 2014 Why would it change? It's just hard to find the cards but it's possible. I already got bought a 610 PCI for this. Unless it's impossible to run DX11 on any PCI card I don't see why the rules would change. Quote Link to comment Share on other sites More sharing options...
MrBreeze Posted June 26, 2014 Share Posted June 26, 2014 Agreed but just want to make sure before I make a similar investment. Quote Link to comment Share on other sites More sharing options...
QuickFast Posted June 26, 2014 Share Posted June 26, 2014 (edited) Guess I'll start it off don't know if it's any good I am working with a half dead board der8auer good luck with your 610 pci anxious to see what it can do Edited June 26, 2014 by QuickFast Quote Link to comment Share on other sites More sharing options...
mr.paco Posted July 9, 2014 Share Posted July 9, 2014 (edited) In the GPU subcomp #7 for 2x Radeon R7 240, it first shows 3DMark11 Performance is to be ran but when you click for the individual comp it shows catzilla 720p. What bench is to be used? Edited July 10, 2014 by mr.paco Quote Link to comment Share on other sites More sharing options...
mr.paco Posted July 10, 2014 Share Posted July 10, 2014 (edited) Macsbeach submitted a run with 2x Radeon R7 240 for the 3DMark11 Performance sub comp #7 with the correct benchmark but the bot engine made it catzilla 720p submission http://hwbot.org/submission/2579835_ Edited July 10, 2014 by mr.paco Quote Link to comment Share on other sites More sharing options...
Massman Posted July 11, 2014 Author Share Posted July 11, 2014 (edited) Ah, I see. Thanks for the report; the benchmark was incorrectly selected Let me fix it right now! Edited July 11, 2014 by Massman Quote Link to comment Share on other sites More sharing options...
mr.paco Posted July 11, 2014 Share Posted July 11, 2014 Thank you Massman, its good now... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.