Splave Posted March 25, 2015 Posted March 25, 2015 I think it should be fine if it fits to the screenshot. It's just the damn sys-info which reads out crap obviously cheating Quote
Achill3uS Posted March 26, 2015 Posted March 26, 2015 guys, what could couse this error message? http://www.3dmark.com/3dm/6373618 hmm ok retest solved it. weird. Quote
ObscureParadox Posted March 31, 2015 Posted March 31, 2015 Where is the link for the Wallpaper please, says Available here : then nothing after that Edit : Found it by looking at a stage. Fix the rules section please Quote
coolhand411 Posted March 31, 2015 Posted March 31, 2015 (edited) here you go https://www.dropbox.com/s/53cqs6rvssgan1b/A%20gskill%20comp.jpg?dl=0 Edited March 31, 2015 by coolhand411 Quote
Alex@ro Posted April 8, 2015 Posted April 8, 2015 Make your bets,this is going to be the most epic sandbagging ever on hwbot,if only someone can crash the server one hour before competition ends Quote
Dancop Posted April 9, 2015 Posted April 9, 2015 What about the wrong processor in FM-Link? Sometimes it shows g3240 and sometimes G3460 Quote
phobosq Posted April 9, 2015 Posted April 9, 2015 Make your bets,this is going to be the most epic sandbagging ever on hwbot,if only someone can crash the server one hour before competition ends I wonder if we see sub-8 in Super Pi Quote
TaPaKaH Posted April 9, 2015 Posted April 9, 2015 No chance, for that you'll need 116.5+ BCLK which is more than 3 BCLK over the highest known sandbag. Quote
Hiwa Posted April 10, 2015 Posted April 10, 2015 (edited) only the errors below are acceptable any other error makes score invalid. YOUR RESULT HAS THE FOLLOWING PROBLEM(S): 1. Level of Detail (LOD) settings modified by NVIDIA driver, result invalid. Check your video driver settings. (What is this?) 2. Non-default settings were used in benchmark. Score could not be calculated. (What is this?) 3. Processor is not recognized (What is this?) Regarding to error n.3 screenshot must match with the FM validation link(CPU frequency, memory tab) PROCESSOR 1. Processor Intel® Pentium® CPU G3240 @ 3.10GHz 2. Reported stock core clock 3,100 MHz. 3. Third line must show the same CPU frequency as in screenshot. Edited April 10, 2015 by Hiwa Quote
Splave Posted April 10, 2015 Posted April 10, 2015 (edited) only the errors below are acceptable any other error makes score invalid. YOUR RESULT HAS THE FOLLOWING PROBLEM(S): 1. Level of Detail (LOD) settings modified by NVIDIA driver, result invalid. Check your video driver settings. (What is this?) 2. Non-default settings were used in benchmark. Score could not be calculated. (What is this?) 3. Processor is not recognized (What is this?) Regarding to error n.3 screenshot must match with the FM validation link(CPU frequency, memory tab) PROCESSOR 1. Processor Intel® Pentium® CPU G3240 @ 3.10GHz 2. Reported stock core clock 3,100 MHz. 3. Third line must show the same CPU frequency as in screenshot. Also can you downclock for screenshot? or no Edited April 10, 2015 by Splave Quote
Dancop Posted April 10, 2015 Posted April 10, 2015 Help guys...this is the last weekend! We need answers...which maxxmem version has to be used? What about my problem with g3460? Quote
steponz Posted April 10, 2015 Posted April 10, 2015 Splave. You can downclock as long as you don't have Error Number 3. Processor is not recognized. Otherwise your frequency has to match the screenshot. Dan. Your frequency in the screenshot doesn't match what is reported in futuremark and you are getting the Processor is not recognized error. Which will invalidate your run. Have you asked about maxxmem version? Quote
Dancop Posted April 11, 2015 Posted April 11, 2015 (edited) I asked about maxxmem Version! And the screenshot I showed was just from another run... http://www.3dmark.com/fs/4411391 Compare These two...they match! but processor is shown as g3460 SAME here http://www.3dmark.com/fs/4411394 Edited April 11, 2015 by Dancop Quote
Massman Posted April 11, 2015 Posted April 11, 2015 MaxxMem version is as the HWBOT rules state: "Allowed benchmark versions: V1.95 or newer" Quote
Dancop Posted April 11, 2015 Posted April 11, 2015 Kk...and what is with my problem? Roman asked for it some weeks ago, too Quote
Massman Posted April 11, 2015 Posted April 11, 2015 As long as the reported stock clock says "Reported stock core clock: 3,100 MHz", it's just the Futuremark website messing up and the result is fine. Quote
barti27 Posted April 13, 2015 Posted April 13, 2015 was a problem displaying the result on the 3dmark and nobody even wrote about it to help Quote
I.nfraR.ed Posted April 13, 2015 Posted April 13, 2015 (edited) The only thing I achived was to kill one of my best PI sticks. I have 2 kits and one of them was clearly better. The second one was unstable at tRCD 9 even with 2.15V and in fact didn't scale past that voltage. First one did it easily at below 2.1V. Looking back at scores, I actually had some chance if I had more LN2 and Samsung memory. I thought more people would participate. Sure I could do better with 32M stage too. Good luck to everyone in the finals. Maybe I would qualify some other time . Edited April 13, 2015 by I.nfraR.ed Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.