Thanks, I think, the rest of them (4900 MHz) are bad not also Better than average I think...

 

yeah, but the 5ghz cineb is awesome:) the other are ok;)

Guys u use coretemp or just see the VID on BIOS ?

 

Thanks !

Sergio

Im use BIOS first. SOmetimes is better set multicore disabled (if is this function in BIOS)

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

It says so much :celebration: :banana:

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

 

LMAO then you tell me Leeg !!! i have 2 to choose from in exchange of my 4790K

 

batches

 

L524B315

L521B470

 

From the list the L524B is very good what do you guys think ?

 

Kind Regards from South America

Sergio

Anyone binned many Vietnam chips yet? Much the same as malay?

Anyone binned many Vietnam chips yet? Much the same as malay?

 

I had one. It had a good NB (5.2GHz was easy) but the memory controller was not that good and the cpu was not more then ok.

All on air.

 

I have a new 6700k now.

SR2BR L546B627

 

5GHz windows boot (stock NB setting) at 1.36v (bios) and 1.344v (idle, cpuz).

It needed 1.44v for CB11.5 in Windows 8 (Windows 7 needs a little less).

 

It actually gave 1.344v in CPUz in Windows, verification gave a little more.

http://valid.x86.fr/13rlbp

 

Edit: not delided at this point (underway)

Edited December 20, 20159 yr by Sparks.nl

6700K L538B828 Delid - AiO Cooling

 

http://valid.x86.fr/xiiv28

 

Prime95 4800/4500/3000CL15 @1.328v LLC2

 

CB15 5000/4700/3200CL14 @1.424v LLC2 (5000/4900@1.456v)

 

XTU 4900/4700/3866CL16 @1.392v LLC2

Edited December 23, 20159 yr by Digg_de

According to this

https://qdms.intel.com/dm/i.aspx/5A160770-FC47-47A0-BF8A-062540456F0A/PCN114074-00.pdf

 

We should have seen the new steppings , some time ago.

Anybody actually seen SR2L0 & SR2L4 ???

 

Sidenote

For normal people , not caring about o/c levels , the new stepping is more about Intel SGX

http://www.alex-ionescu.com/Enclave%20Support%20In%20Windows%2010%20Fall%20Update.pdf

 

Edited December 21, 20159 yr by TASOS

L537B118

6700k/VID 1.248v

5.0/4.9-LLC5 boot 1.43v W7

5.0/5.0 XP/32m

5.9 XTU cold/delidded

Edited December 24, 20159 yr by coolhand411

Got one l546 with new SRL20 overclocks like shit no boot 5ghz on water...

 

Sent from my SM-N910F using Tapatalk

L536B248

 

1.22 VID (Asus)

 

5.1 hwbprime 1.39v

5.0/4.9 CB15 1.41v

 

Cold testing soon.

Edited December 24, 20159 yr by Doug2507

Should be good for 6500 hwbotprime easily!

Quickly learning never to expect the same results on cold compared to ambient Dan!

Tested around 20 to 25 chips now...6600k and 6700k...the better on air, the better on ln2!

Never seen something different

Well, here's hoping! Wish the last one wasn't killed by seller before I got it, would have been a monster. This one should hopefully do well enough though!

L538B560

 

VID 1.12/1.136

 

5.0 cb11.5@1.25v

5.2 cb11.5@1.42v

 

http://imgur.com/GKyXa2t

 

(No delid, small wc loop, rad sat in icy bucket, lousy tim, 8-10 deg idle/42-44deg load)

 

hi

Did you test on LN2?

 

@Doug2507

No. Chip was killed before I even got it. Seller got water on the board and tried booting for 1-2hrs. Killed IMC. Worked single channel but no dual.

No. Chip was killed before I even got it. Seller got water on the board and tried booting for 1-2hrs. Killed IMC. Worked single channel but no dual.

 

Oh my god

I'm so sorry.

Yes, that is terrible, chip looked golden

 

Sent from my SM-N910F using Tapatalk

Totally, would have been good to see what it could've done, by me or anyone else. Such a waste. Sh1t happens I guess.

I had one. It had a good NB (5.2GHz was easy) but the memory controller was not that good and the cpu was not more then ok.

All on air.

 

I have a new 6700k now.

SR2BR L546B627

 

5GHz windows boot (stock NB setting) at 1.36v (bios) and 1.344v (idle, cpuz).

It needed 1.44v for CB11.5 in Windows 8 (Windows 7 needs a little less).

 

It actually gave 1.344v in CPUz in Windows, verification gave a little more.

http://valid.x86.fr/13rlbp

 

Edit: not delided at this point (underway)

 

VID is in attachment picture (1.16 / 1.26)

Edited December 29, 20159 yr by Sparks.nl

According to this

https://qdms.intel.com/dm/i.aspx/5A160770-FC47-47A0-BF8A-062540456F0A/PCN114074-00.pdf

 

We should have seen the new steppings , some time ago.

Anybody actually seen SR2L0 & SR2L4 ???

 

Sidenote

For normal people , not caring about o/c levels , the new stepping is more about Intel SGX

http://www.alex-ionescu.com/Enclave%20Support%20In%20Windows%2010%20Fall%20Update.pdf

 

 

 

 

 

Got one l546 with new SR2L0 overclocks like bunnyextraction no boot 5ghz on water...

 

Sent from my SM-N910F using Tapatalk

 

 

Anyone else with the new stepping ???

Anyone else with the new stepping ???

 

Yup.

 

SR2L0 L548B385. S/N: M5849XYZ70XX74

 

Good TIM at least on my sample. On H110GT with about 24C water temps, max temp at 4.8 @ 1.5V was 70C in CB R15.

 

However core is pretty weak on mine.

 

4.5 CB R15/XTU is about 1.25-1.285V.

 

4.6 CB R15/XTU/X265 is about 1.35-1.42V

 

4.7 CB R15 is about 1.415V. AVX2 or XTU is probably close to 1.48V

 

4.8 Hailmary is done on CB R15 1.48V 1.52V load.

 

Maximus VIII Hero 2x16GB GSKILL B-Die 3200 C14 SA/IO @ 1.15V

Edited January 3, 20169 yr by cookiesowns