Skylake 6700K/6600K Batch and Serial Numbers

[Guest barbonenet]

Thanks, I think, the rest of them (4900 MHz) are bad not also Better than average I think...

 

yeah, but the 5ghz cineb is awesome:) the other are ok;)

[andressergio]

Guys u use coretemp or just see the VID on BIOS ?

 

Thanks !

Sergio

[flanker]

Im use BIOS first. SOmetimes is better set multicore disabled (if is this function in BIOS)

[Leeghoofd]

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

[Schmuckley]

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

It says so much :celebration: :banana:

[andressergio]

Don't trust Flanker, he's from the dark side

 

Time for LN2 Christian!!!

 

LMAO then you tell me Leeg !!! i have 2 to choose from in exchange of my 4790K

 

batches

 

L524B315

L521B470

 

From the list the L524B is very good what do you guys think ?

 

Kind Regards from South America

Sergio

[Doug2507]

Anyone binned many Vietnam chips yet? Much the same as malay?

[Sparks.nl]

Anyone binned many Vietnam chips yet? Much the same as malay?

 

I had one. It had a good NB (5.2GHz was easy) but the memory controller was not that good and the cpu was not more then ok.

All on air.

 

I have a new 6700k now.

SR2BR L546B627

 

5GHz windows boot (stock NB setting) at 1.36v (bios) and 1.344v (idle, cpuz).

It needed 1.44v for CB11.5 in Windows 8 (Windows 7 needs a little less).

 

It actually gave 1.344v in CPUz in Windows, verification gave a little more.

http://valid.x86.fr/13rlbp

 

Edit: not delided at this point (underway)

Edited December 20, 2015 by Sparks.nl

[Guest Digg_de]

6700K L538B828 Delid - AiO Cooling

 

http://valid.x86.fr/xiiv28

 

Prime95 4800/4500/3000CL15 @1.328v LLC2

 

CB15 5000/4700/3200CL14 @1.424v LLC2 (5000/4900@1.456v)

 

XTU 4900/4700/3866CL16 @1.392v LLC2

Edited December 23, 2015 by Digg_de

[TASOS]

According to this

https://qdms.intel.com/dm/i.aspx/5A160770-FC47-47A0-BF8A-062540456F0A/PCN114074-00.pdf

 

We should have seen the new steppings , some time ago.

Anybody actually seen SR2L0 & SR2L4 ???

 

Sidenote

For normal people , not caring about o/c levels , the new stepping is more about Intel SGX

http://www.alex-ionescu.com/Enclave%20Support%20In%20Windows%2010%20Fall%20Update.pdf

 

Edited December 21, 2015 by TASOS

[coolhand411]

L537B118

6700k/VID 1.248v

5.0/4.9-LLC5 boot 1.43v W7

5.0/5.0 XP/32m

5.9 XTU cold/delidded

Edited December 24, 2015 by coolhand411

[Alex@ro]

Got one l546 with new SRL20 overclocks like shit no boot 5ghz on water...

 

Sent from my SM-N910F using Tapatalk

[Doug2507]

L536B248

 

1.22 VID (Asus)

 

5.1 hwbprime 1.39v

5.0/4.9 CB15 1.41v

 

Cold testing soon.

Edited December 24, 2015 by Doug2507

[Dancop]

Should be good for 6500 hwbotprime easily!

[Doug2507]

Quickly learning never to expect the same results on cold compared to ambient Dan!

[Dancop]

Tested around 20 to 25 chips now...6600k and 6700k...the better on air, the better on ln2!

Never seen something different

[Doug2507]

Well, here's hoping! Wish the last one wasn't killed by seller before I got it, would have been a monster. This one should hopefully do well enough though!

[Morteza.p]

L538B560

 

VID 1.12/1.136

 

5.0 cb11.5@1.25v

5.2 cb11.5@1.42v

 

http://imgur.com/GKyXa2t

 

(No delid, small wc loop, rad sat in icy bucket, lousy tim, 8-10 deg idle/42-44deg load)

 

hi

Did you test on LN2?

 

@Doug2507

[Doug2507]

No. Chip was killed before I even got it. Seller got water on the board and tried booting for 1-2hrs. Killed IMC. Worked single channel but no dual.

[Morteza.p]

No. Chip was killed before I even got it. Seller got water on the board and tried booting for 1-2hrs. Killed IMC. Worked single channel but no dual.

 

Oh my god

I'm so sorry.

[Alex@ro]

Yes, that is terrible, chip looked golden

 

Sent from my SM-N910F using Tapatalk

[Doug2507]

Totally, would have been good to see what it could've done, by me or anyone else. Such a waste. Sh1t happens I guess.

[Sparks.nl]

I had one. It had a good NB (5.2GHz was easy) but the memory controller was not that good and the cpu was not more then ok.

All on air.

 

I have a new 6700k now.

SR2BR L546B627

 

5GHz windows boot (stock NB setting) at 1.36v (bios) and 1.344v (idle, cpuz).

It needed 1.44v for CB11.5 in Windows 8 (Windows 7 needs a little less).

 

It actually gave 1.344v in CPUz in Windows, verification gave a little more.

http://valid.x86.fr/13rlbp

 

Edit: not delided at this point (underway)

 

VID is in attachment picture (1.16 / 1.26)

Edited December 29, 2015 by Sparks.nl

[TASOS]

According to this

https://qdms.intel.com/dm/i.aspx/5A160770-FC47-47A0-BF8A-062540456F0A/PCN114074-00.pdf

 

We should have seen the new steppings , some time ago.

Anybody actually seen SR2L0 & SR2L4 ???

 

Sidenote

For normal people , not caring about o/c levels , the new stepping is more about Intel SGX

http://www.alex-ionescu.com/Enclave%20Support%20In%20Windows%2010%20Fall%20Update.pdf

 

 

 

 

 

Got one l546 with new SR2L0 overclocks like bunnyextraction no boot 5ghz on water...

 

Sent from my SM-N910F using Tapatalk

 

 

Anyone else with the new stepping ???

[cookiesowns]

Anyone else with the new stepping ???

 

Yup.

 

SR2L0 L548B385. S/N: M5849XYZ70XX74

 

Good TIM at least on my sample. On H110GT with about 24C water temps, max temp at 4.8 @ 1.5V was 70C in CB R15.

 

However core is pretty weak on mine.

 

4.5 CB R15/XTU is about 1.25-1.285V.

 

4.6 CB R15/XTU/X265 is about 1.35-1.42V

 

4.7 CB R15 is about 1.415V. AVX2 or XTU is probably close to 1.48V

 

4.8 Hailmary is done on CB R15 1.48V 1.52V load.

 

Maximus VIII Hero 2x16GB GSKILL B-Die 3200 C14 SA/IO @ 1.15V

Edited January 3, 2016 by cookiesowns