5erveD Posted February 2, 2017 Posted February 2, 2017 5100 is possible. 5200 @ 1.4v gave to high temps due to the air cooler. Don't have an aio or custom loop. But I reckon it's pretty good. Will try ln2 this weekend. Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
Sparks.nl Posted February 4, 2017 Posted February 4, 2017 (edited) With voltage settings on page 1 or any other voltage I can't boot to Windows with -100C where I could with -50C. I am still looking, but does anyone have an idea? Blue screens all over the place. Edit: -50 was with stock voltages Edited February 4, 2017 by Sparks.nl Quote
l0ud_sil3nc3 Posted February 4, 2017 Posted February 4, 2017 (edited) With voltage settings on page 1 or any other voltage I can't boot to Windows with -100C where I could with -50C.I am still looking, but does anyone have an idea? Blue screens all over the place. Edit: -50 was with stock voltages What voltages are you speaking of? Edited February 4, 2017 by l0ud_sil3nc3 Quote
l0ud_sil3nc3 Posted February 4, 2017 Posted February 4, 2017 Little push on the dualie, with my last 10 liters. Quote
Sparks.nl Posted February 4, 2017 Posted February 4, 2017 At -50 auto and vccio 1.1, vccsa 1.2, at -100 see page 1. Quote
l0ud_sil3nc3 Posted February 4, 2017 Posted February 4, 2017 At -50 auto and vccio 1.1, vccsa 1.2, at -100 see page 1. All good now? Hope so nothing worse than dealing with issues when all ready cold. Quote
5erveD Posted February 4, 2017 Posted February 4, 2017 Cracked tim ? Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
l0ud_sil3nc3 Posted February 4, 2017 Posted February 4, 2017 Cracked tim ? Verstuurd vanaf mijn MotoG3 met Tapatalk Nope possibly defective sata port on the Intel controller or just some weirdness once you go cold idk. I noticed this issue on one of my particular boards and thought I had a bad SATA cable and or SSD or that my OS was possibly thrashed. But simply moving the SATA cable from the top first Intel SATA port located closest to the 24 pin to any other port seems to fix it and everything boots fine. The weird thing is that it's not reproducible easily for me and reboot usually fixes it allowing the OS to boot on that top left Intel port. Maybe something with the PCH idk I'm not an electrical engineer lol. Good thing I notice this weird shit and I am not the only one it affects. Quote
5erveD Posted February 4, 2017 Posted February 4, 2017 Yes, could be sata cable or one of the ports. Had this once as well. Restore default will also work in case of weird problems which come out of nowhere. Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
Sparks.nl Posted February 4, 2017 Posted February 4, 2017 (edited) It was a sata issue. I moved sata to a different port, after that it worked. But now I have to stop anyway because now the tim did crack... +18C in XTU. Edited February 4, 2017 by Sparks.nl Quote
5erveD Posted February 4, 2017 Posted February 4, 2017 Heat it up with the heatgun and equal out the temps of the pot and package en pull it down again slowly. Should work tho. If ya need help, app me :-) Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
Sparks.nl Posted February 4, 2017 Posted February 4, 2017 It is to late, I was thinking about doing that but... While heating it up I saw a little bit of water near the power switch. So I turned it off. I don't want to take the risk. Quote
5erveD Posted February 4, 2017 Posted February 4, 2017 Some times it is beter to be safe then sorry. Especially with ur hardware kill rate :-p Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
Sparks.nl Posted February 4, 2017 Posted February 4, 2017 (edited) I have had enough bad luck with hardware lately. Let's not challenge it. Edit: Now I think of it, I did have one win. I placed my defective sensor (strange temp issue beyond -140C) as a backup sensor. Both sensors were fine untill -185C. Edited February 4, 2017 by Sparks.nl Quote
MetalRacer Posted February 27, 2017 Posted February 27, 2017 Any ideas why a previously working AFD would suddenly start freezing anytime I hit apply regardless if any settings were changed or not? Quote
l0ud_sil3nc3 Posted February 27, 2017 Posted February 27, 2017 Any ideas why a previously working AFD would suddenly start freezing anytime I hit apply regardless if any settings were changed or not? Did you try to uninstall and reinstall? Quote
MetalRacer Posted February 27, 2017 Posted February 27, 2017 (edited) I did try uninstalling and reinstalling on Win7, Win10 and XP64 but had no luck. I first encountered the problem when I enable ln2 mode and it persists even with ln2 mode disabled. I should mention this is with the full size OC Formula. Edited February 27, 2017 by MetalRacer Quote
barbonenet Posted March 2, 2017 Posted March 2, 2017 Ln2 mode does nothing on mocf...i guess on bigocf as well..... Sent from my SUPER using Tapatalk Quote
Splave Posted March 2, 2017 Author Posted March 2, 2017 I did try uninstalling and reinstalling on Win7, Win10 and XP64 but had no luck. I first encountered the problem when I enable ln2 mode and it persists even with ln2 mode disabled. I should mention this is with the full size OC Formula. Yo do any of the voltages look different then what you set in bios? on z97 AFD limits on some versions were lower than what you could set in bios so pressing apply even without changing anything would make it freeze. Quote
MetalRacer Posted March 8, 2017 Posted March 8, 2017 (edited) Yo do any of the voltages look different then what you set in bios? on z97 AFD limits on some versions were lower than what you could set in bios so pressing apply even without changing anything would make it freeze. That was it! The VCC PLL Voltage setting was the problem. Big Thanks!!! Edited March 11, 2017 by MetalRacer Quote
suzuki Posted March 24, 2017 Posted March 24, 2017 Any new bios for this board ? What is the best one for mem oc-ing ? Quote
Samsarulz Posted March 24, 2017 Posted March 24, 2017 Last One I know is 7.40D Enviado desde mi A0001 mediante Tapatalk Quote
5erveD Posted March 24, 2017 Posted March 24, 2017 Isn't also micro code related ? Verstuurd vanaf mijn MotoG3 met Tapatalk Quote
Sparks.nl Posted March 24, 2017 Posted March 24, 2017 (edited) Best microcode for memory overclocking is 2D or 74. Best bios to use is 7.21b. This bios has the 2D version. Edit: I forgot - these microcode's are for 6700k, I don't know for 7350k yet and I don't own a 7700k. Edited March 24, 2017 by Sparks.nl Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.