Jump to content
HWBOT Community Forums

Recommended Posts

  • Administrators
Posted (edited)

The board is allowed, apart from the LN2 1151 boards and the soc gaming z270 all boards should be eligible for use

 

P.S. I asked at GA again to see if I am right, if it is much better than z270n wifi we might have problem, it is not listed in europe

 

P. P.S. Board is ok, it seems to have no technical advantage above others

Edited by websmile
  • Administrators
Posted

A couple of hints, LOD is not allowed for time spy, it is explicitly ruled out and this is also valid for time spy physics, second point is that 5003 is the limit, if the futuremark link shows higher results you are out, and please only use publicly available BIOS versions, we do not want guys to have an unfair advantage by new xoc BIOS others cannot use

Posted
A couple of hints ... and please only use publicly available BIOS versions, we do not want guys to have an unfair advantage by new xoc BIOS others cannot use

 

So the x06 bios on a z97x-soc force is not alowed,than i know what to do tomorow after work.

  • Administrators
Posted

This is an old BIOS which was published several times on hwbot and elsewhere, I only refer to new Z270 Bioses which might be given to Beta testers

  • Administrators
Posted

Thanks for the BIOS, but we will not allow it for the march madness because it came too late. We will re evaluate this like all restrictions for the next parts of the Gigabyte series, yes, there is more to come :D

  • Administrators
Posted (edited)

Another heads up - for time spy physics the rules of time spy apply for LOD (not allowed) and latest system info with monitoring enabled is mandatory - we orientate on screenshot and validation link for seeing if the 5003 cap was not violated, when I see 4ghz as max turbo or something similarily ridiculous I have no choice but to remove the entry

Edited by websmile
Posted
Thanks for the BIOS, but we will not allow it for the march madness because it came too late. We will re evaluate this like all restrictions for the next parts of the Gigabyte series, yes, there is more to come :D

 

thats what I figured.

good luck guys, I'm out.

Posted
Another heads up - for time spy physics the rules of time spy apply for LOD (not allowed) and latest system info with monitoring enabled is mandatory - we orientate on screenshot and validation link for seeing if the 5003 cap was not violated, when I see 4ghz as max turbo or something similarily ridiculous I have no choice but to remove the entry

 

wait so do I need to redo my 102.05BCLK run? Because I have 5G CPU-z but 3Dmark is showing 5004MHz

  • Administrators
Posted
wait so do I need to redo my 102.05BCLK run? Because I have 5G CPU-z but 3Dmark is showing 5004MHz

 

Unfortunately yes, CPUZ and futuremark readout have to be 5003 or less

Posted
Unfortunately yes, CPUZ and futuremark readout have to be 5003 or less

 

Great so I can go back to rerunning timespy for a while but at 0.02 less BCLK or what ever it is that will make 3Dmark happy.

  • Administrators
Posted (edited)

I checked stage 1, remaining subs should be ok @fgi please check the time spy rules again, you used tesselation tweaking which is explicitly disallowed for time spy - sorry, but it is written in the benchmark rules and I also gave a heads up here at support thread that rules are applying also for physics on top :/

Edited by websmile
Posted

Guys, now when 1 stage is done, can you tell me how the hell you get 200 more points with less core speed and not so tight RAM like i get :D

i was going to bad at 7AM, so my wife was werry angry with me all the day -> this must be enough for you :D

Posted

:D

 

I tested all, z270x 5 with Kaby Dual and Quad, z170 Soc with Kaby Dual and Quad.

 

I have strong RAM Setting with 1900 cl12 1T

 

But No chance :(

 

Please tell use the tweak :D

 

 

Gesendet von iPhone mit Tapatalk

Posted (edited)

I had 6850+ and 1-2 was 6900+. 5g/5g 1933 tight(at least for my mobo). But according to the 6950+ scores, the less you clock the better you score.

I dont judge anyone but it would be better if we know what we were doing wrong.

Edited by Demac

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...