TAGG Posted February 28, 2018 Posted February 28, 2018 I fixed at least 1000 pins over the past 2 days, this weekend i'll try figuring out the platform and how to bin pentium MMX 1 Quote
ozzie Posted March 1, 2018 Posted March 1, 2018 honestly guys, its a wallpaper, as long as its a wallpaper for the comp and everyone has it so all sub are legal...does it really matter that much !!! Quote
yosarianilives Posted March 1, 2018 Posted March 1, 2018 5 hours ago, ozzie said: honestly guys, its a wallpaper, as long as its a wallpaper for the comp and everyone has it so all sub are legal...does it really matter that much !!! It definitely matters man. Everyone knows that ugly wallpaper = shit OC 1 Quote
Guest Posted March 1, 2018 Posted March 1, 2018 Meh ... I like it ... kind of art deco TAGG you have so many processors all the same? Haha I gave heaps of them away over the years Quote
GRIFF Posted March 1, 2018 Posted March 1, 2018 the rule that the frequency on the screen can be lower than the validate is valid? I can not make the screen with 372mhz on SS. Quote
GRIFF Posted March 1, 2018 Posted March 1, 2018 (edited) 16 hours ago, TAGG said: I fixed at least 1000 pins over the past 2 days, this weekend i'll try figuring out the platform and how to bin pentium MMX my best 166 and 200 finish spi 1m at 133 * 2.5=333mhz at 3.65-3.7V on air Edited March 1, 2018 by GRIFF 1 Quote
TAGG Posted March 1, 2018 Posted March 1, 2018 6 hours ago, GRIFF said: my best 166 and 200 finish spi 1m at 133 * 2.5=333mhz at 3.65-3.7V on air Thanks for the tip, for 3,7 i'll have to mod my board first, since the GA-5AX only goes up to 3,5V @avalance from left to right 166 / 200 / 233 MHz one stack for each type Quote
ozzie Posted March 2, 2018 Posted March 2, 2018 12 hours ago, yosarianilives said: It definitely matters man. Everyone knows that ugly wallpaper = shit OC garbage Quote
hyve Posted March 2, 2018 Posted March 2, 2018 (edited) Quote Thanks for the tip, for 3,7 i'll have to mod my board first, since the GA-5AX only goes up to 3,5V What rev' do you have ? if you'll do it can you please share me some pictures of it ? i'll be grateful for that i have the 5.2 Edited March 2, 2018 by hyve Quote
TAGG Posted March 2, 2018 Posted March 2, 2018 I have the 4.1 I'll share pictures and results of binning when I'm done Quote
GRIFF Posted March 2, 2018 Posted March 2, 2018 I have the 3.2. I made the change to the card in order to adjust the voltage Vccio. For high fsb 135 or 140 mhz these cards need high Vccio, 3.8V in my case to make windows boot at 140 mhz. The problem however is the cache that normally takes 115-125 mhz and only in rare cases more. Without cache, however, the result super pi 1m is bad. 1 Quote
TASOS Posted March 2, 2018 Author Posted March 2, 2018 14 hours ago, hyve said: What rev' do you have ? if you'll do it can you please share me some pictures of it ? i'll be grateful for that i have the 5.2 10 hours ago, TAGG said: I have the 4.1 I'll share pictures and results of binning when I'm done You are both willing to take a risk , on a board you cant easily replace ??? Quote
TAGG Posted March 2, 2018 Posted March 2, 2018 2 hours ago, TASOS said: You are both willing to take a risk , on a board you cant easily replace ??? What would I get from not risking it? Also it's not that hard to find a 5-AX i got two of them, unfortunately one was DOA (i get them from the scrap so you shouldn't be too surprised if it doesn't work) Plus I don't have 5-AAs since I never actively looked for them i might have just thrown them away again... Quote
Jurin1388 Posted March 2, 2018 Posted March 2, 2018 I can not do any validation on OCESPORT. I have a Pentium MMX 200Mhz processor overclocked to 297 Mhz. When I want to save my result, it always appears: "your submission is incoplete" ("Only use processors from the sub family"). But if I do the validation directly on HWBOT, it's OK (http://hwbot.org/submission/3797837_). I do not know how to solve this problem. Any error on OCESPORT? Quote
hyve Posted March 3, 2018 Posted March 3, 2018 7 hours ago, Jurin1388 said: I can not do any validation on OCESPORT. I have a Pentium MMX 200Mhz processor overclocked to 297 Mhz. When I want to save my result, it always appears: "your submission is incoplete" ("Only use processors from the sub family"). But if I do the validation directly on HWBOT, it's OK (http://hwbot.org/submission/3797837_). I do not know how to solve this problem. Any error on OCESPORT? Same for me with spi 1m Quote
Administrators websmile Posted March 3, 2018 Administrators Posted March 3, 2018 Somehow the cpu limitation was not working anymore, I resubmitted it and now it seems to be OK again Quote
hyve Posted March 3, 2018 Posted March 3, 2018 1 hour ago, websmile said: Somehow the cpu limitation was not working anymore, I resubmitted it and now it seems to be OK again Work well now Quote
GRIFF Posted March 5, 2018 Posted March 5, 2018 On 1 марта 2018 г. at 4:04 PM, GRIFF said: the rule that the frequency on the screen can be lower than the validate is valid? I can not make the screen with 372mhz on SS. Ideas? Quote
unityofsaints Posted March 6, 2018 Posted March 6, 2018 On 3/1/2018 at 11:59 AM, yosarianilives said: It definitely matters man. Everyone knows that ugly wallpaper = shit OC There's an easy fix: don't set the wallpaper until after you've run the bench Quote
GRIFF Posted March 14, 2018 Posted March 14, 2018 @TASOS Please enter the complete cup round list which was probably lost in the old forum. Thanks. Quote
macsbeach98 Posted March 15, 2018 Posted March 15, 2018 Its on this page Griff. https://community.hwbot.org/topic/171301-osibs-season-4-design-thread/?page=5 Quote
GRIFF Posted March 15, 2018 Posted March 15, 2018 1 hour ago, macsbeach98 said: Its on this page Griff. https://community.hwbot.org/topic/171301-osibs-season-4-design-thread/?page=5 Perfect. Thank you. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.