Guest barbonenet Posted August 25, 2014 Posted August 25, 2014 i have do it today! now card blink at -90! what's max safe volt under ln2?vcore vrail vaux vram? thanks Quote
der8auer Posted August 25, 2014 Posted August 25, 2014 Something between 1,25 and 1,35 should be fine for 0.95 Volt rail on LN2. Just check how it moves your black-screen. Quote
Lucky_n00b Posted August 25, 2014 Posted August 25, 2014 i have do it today! now card blink at -90! what's max safe volt under ln2?vcore vrail vaux vram? thanks Blink at -90C? how many volts you give to the 0.95v rail? 1.25V or 1.3V? Quote
zzolio Posted August 25, 2014 Posted August 25, 2014 i get that to but i just have to reboot one time and then i can bench i have tried 1.4V on ln2 run some benchmarks too get the mem warm Quote
Guest barbonenet Posted August 25, 2014 Posted August 25, 2014 card blink at -90!!! i try 1,11 1,25 1,3........without any after 1,1v(at 1,1v my blink point increase from -40 to -90)! i try at 1,45v.....but over 1,38v card go slowly!!! Quote
slaske6 Posted September 19, 2014 Posted September 19, 2014 does anybody have the cold slow bios 4 gtx 285 ref , bugs around -60 :-( Quote
Calathea Posted September 29, 2014 Posted September 29, 2014 does anybody have the cold slow bios 4 gtx 285 ref , bugs around -60 :-( It may be possible to hard mod via cutting power leg (or removing completely) on temperature monitor chip ADT 7473, at least it's working on the GTX 280. Quote
slaske6 Posted October 4, 2014 Posted October 4, 2014 (edited) thanks m8 and wee are talking about to cut leg 3 vcc am i correkt m8 http://pdf1.alldatasheet.com/datasheet-pdf/view/166434/AD/ADT7473.html Edited October 4, 2014 by slaske6 Quote
Farjam Posted November 15, 2014 Posted November 15, 2014 hi guys Is there any special bios for gtx275 Lightning? i mean for cb and coldslow [and what is their Cb normaly?] Quote
QuickFast Posted January 29, 2015 Posted January 29, 2015 Any one have another hd 4890 bois I could try,Tried the one form the first page but still getting black screen with anything over 1070mhz on the core Quote
QuickFast Posted January 30, 2015 Posted January 30, 2015 Never mind it's works just got done testing with Aquamark 1090\1185 on air thanks for the all the work you put into this over at XS Quote
darkgregor Posted May 9, 2015 Posted May 9, 2015 Hi all i need Asus GTX 580 Matrix stock firmware or matrix_xoc to go back stock firmware . if someone have that ? Thanks Quote
MetalRacer Posted May 9, 2015 Posted May 9, 2015 Hi all i need Asus GTX 580 Matrix stock firmware or matrix_xoc to go back stock firmware .if someone have that ? Thanks GTX 580 Matrix can be found here. http://www.techpowerup.com/vgabios/103179/asus-gtx580-1536-110414.html Quote
darkgregor Posted May 9, 2015 Posted May 9, 2015 GTX 580 Matrix can be found here.http://www.techpowerup.com/vgabios/103179/asus-gtx580-1536-110414.html thanks for reply i've already try it 8( my trouble are fan always at max can't adjust the voltage direct on the board and lose the matrix various charge lightning . i need to go back F/W stock ? Quote
Strong Island Posted August 1, 2015 Posted August 1, 2015 Does anyone have a cold slow bios for the titan x or a 3d only bios. Is it needed? Going to bench on cold for first time tonight. Quote
Dancop Posted August 1, 2015 Posted August 1, 2015 Cold slow bios for titanx...hahaha...that would be something like the holy grail Quote
NoMS Posted August 10, 2015 Posted August 10, 2015 Someone has an coldslow bios for ref 7600GT (Quadro FX 560 to be more specifically, same crap as 7600gt but with less vram)? Thanks! Quote
xxbassplayerxx Posted September 16, 2015 Posted September 16, 2015 9800 GX2 BIOS did not alleviate cold slow for me. Quote
superpatodonaldo Posted November 16, 2015 Posted November 16, 2015 Collecting all the coldslow BIOSes. BIOS - MSI GTX 560 Ti Hawk coldslow BIOS: http://downloads.hwbot.org/downloads/VGABIOS/560tihawkcs.rom I try to flash that bios for my GTX560Ti Hawk ( bios switch position on "performance") but the screen is full of artifacts and it's seem that the vga is not recognised Quote
basco Posted November 17, 2015 Posted November 17, 2015 i acn see in your screenshots from 560 that your card uses elpida memory if that is correct? all other twin frozr II should have samsung mem. maybe thats the prob. i flashed this bios on my twinfrozr II no problems Quote
superpatodonaldo Posted November 17, 2015 Posted November 17, 2015 i acn see in your screenshots from 560 that your card uses elpida memory if that is correct?all other twin frozr II should have samsung mem. maybe thats the prob. i flashed this bios on my twinfrozr II no problems Yes it uses elpida memory It's possible to mod my own bios for coldslow running? Quote
rockeur.alexis Posted February 7, 2016 Posted February 7, 2016 Hi Is that anybody have a cold slow bios for GTX260 and GTX280 Thank you Quote
xxbassplayerxx Posted February 7, 2016 Posted February 7, 2016 BIOS here: http://uwot.eu/blog/voltage-modifications/vmod_gtx280/ I haven't tested it personally, though. EDIT: Link from there is dead. I downloaded it a long time ago, so here's a link: https://www.dropbox.com/s/gy1xws1ry3g47bd/cs1%20%28untested%29.rom?dl=0 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.