June 3, 201213 yr Seems like my Ivy is still working great, tested it again on a Gigabyte motherboard and HT is still working, can someone explain this to me?
June 4, 201213 yr 2 E.S. ( E1 stepp. )... ok up to 2.1V Didn't push more voltage through them. No degradation, etc.
June 4, 201213 yr 2 E.S. ( E1 stepp. )... ok up to 2.1V Didn't push more voltage through them. No degradation, etc. You have strong eggs )
June 5, 201213 yr Or maybe I'm just foolishly reckless One of the E.S. ( the 6.4G SuperPi 1M chip ) scaled all the way to 1.98V ( probably because it sucked balls, others would do 7GHz Pi 4M with that voltage ). Can't wait to test my retails, gotta get some reviews and articles out prior to that though
June 17, 201212 yr really? I'm having problems killing 3218C's for RMA on air with 1.9V lol i had one it started to act funny dimm slots frosted over let it dry for a couple days then code 00 and it was dead
June 17, 201212 yr first time using vaseline and i killed my mb and idk what else and i was just cooling down the pot
June 17, 201212 yr really? I'm having problems killing 3218C's for RMA on air with 1.9V crap chips won't die .. only good ones
June 17, 201212 yr New chips tend to be way better at lower volts, but die easy past 1.8V...mine did not survive 1.84V @6.631 32m...couldn't even scream "fiftynine" or so at the screen as it not even managed loop 14 I had a very nice mount and first time with gelid allowing me wprime 6400+ ~1.776V...just seem to couldn't handle 1.84V on a single core... That's crap Was that the good CPU you posted in the BATCH thread?
June 17, 201212 yr yes... I am really no lucky with Ivy...the crappy chips survive long benching but don't give good results, my good chips die with Vcore and LN2 easy after very short time...
June 18, 201212 yr Crew yes... I am really no lucky with Ivy...the crappy chips survive long benching but don't give good results, my good chips die with Vcore and LN2 easy after very short time... Which board Chris ?
June 18, 201212 yr Got also the profile issue on my MVG, sometimes the profiles were gone or just not working anymore
June 19, 201212 yr whats wrong sam its missing celion dion sound track lol. i just use a 9v battery to kill chips much easier. just put wires from positive and negative then drag the wires over the back of cpu and instant death lol.
June 19, 201212 yr Crew i just use a 9v battery to kill chips much easier. just put wires from positive and negative then drag the wires over the back of cpu and instant death lol. i used this method once.. was quick and easy. i feel really bad about it!
June 19, 201212 yr You can remove IHS, replace bad tim... replace IHS (like a monkey or worse)... put the cpu in the socket... than run the system under cascade (with bad contact it's quite better) and put 1.75v !!! ...it's done, your chip is cooked (time to have dinner) What? I did it wrong? Edited June 19, 201212 yr by Eeky NoX Precisions...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.