websmile

I received a second kit out of same order, it did specs and 3733 12-12-12-28 220 1T around 1,7v on Hero, at 3866 12-12 boot and 1m but 32m failed, 12-14 worked then, might have needed better IMC. judging from xmp voltage your kit might do better, needed 1,32v for that

@K404 I don´t think there is chance to edit this at private settings you can of course lower chance of getting quoted or tagged by posting less

Why, Mike? I think your G4400 and G610GT should work with 450W PSU

Do all Ripjaw5 have this surplus number on label? I refer to the 2195 at upperleft

Send it attached with pm to christian ney, maybe he can help you - but please take in that screenshot is always mandatory, for all benches, even if you have validation - only XTU is excepetion iirc

Lool

RipjawV

Can your Patriot run 3600 16-16 on asus at 1,35v or less, Calvin? My "cheap" 3600c16 fail this no matter which imc volts or subtimings,1 or 2t, they need above 1,35 for this but run 16-17 at 1,3v memtest...

I like 3600 C13-18 tight subs or 3733C15-18 tight, both works with good mems at below 1,6v normally if you have decent imc and board and is still in a good voltage/performance ratio

Not bad

good eff as well, nice run

Nach ein paar Jahren im Bot solltest du eigentlich wissen das screenshots verpflichtend sind^^ - ich hoffe du hast noch einen auf der Platte, der Link alleine reicht nicht! - kleiner Hinweis für die Zukunft, ist immer schade wenn ein gutes Ergebnis irgendwann einfach wegen sowas geblockt wird

These will arrive in germany 2017 - like all interesting kits, but at 30% above USA price . Nice run

PIS are sold, will ship tomorrow Can get moved to sold, please, thanks for the space, hwbot Goodbye

Good job, Bala

Last bump

Price drop on the Samsung

Bwahaha, I see 20 pissed guys crying over new year - great^^

Yes, 32m should work to get decent price like stated above, stability is key-word in this. Air result, despite being on Gigabyte Z87, is not too impressive^^

Skyfake - I bought one 6600K and it did 5ghz 1,32v 32m win7, had a second chip for a friend I bought pretested that did 4,8ghz 1,32v Geekbench and have an ES that does far worse - a lot depends on luck, some guys buy pretested at forums, but on what I see at biggest german cpu market for used stuff, average 6700K needs 1,3v for 4,5ghz prime. You go higher, scaling and temps get worse, more volts needed for each 100mhz upwards than for the 100mhz you went up before. As said, I would not buy, this is decision each guy makes alone, but I accept the simple fact that these are cpus that are not bad^^ - good luck at next cpu, maybe you find a gem And now btt, enough said from my side

Don´t mix up prime and other benchmarks, 1,4ghz prime is not easy on air, especially for non delidded chip, I would for sure not buy a pretested cpu at this price at caseking (4,8ghz 1,4v 620 iirc) but I know that these are good chips clearly above the average we have seen so far. Everyone can decide for himself if he wants to buy or not, and have his own opinion on this and state it, but to say these are not good is simply wrong

Not sure, LN2 looks good, if stability and condition is ok these might well be 150 Euros or more for people who search LN2 pretested stuff - just an educated guess, I am a bit out of price estimates^^

Still same issue Nick showed three months ago? Looks as if this is only cosmetic annoyance though, time is fast enough