Lucky_n00b Posted June 29, 2014 Posted June 29, 2014 Imagine the overflow of good chips on the market,5-5.2 ghz will be on everybody's hands because most of them don;t scale on ln2. Bad for extreme oc.....good for enthusiast Sounds like DC was the SandyBridge rev.2 ? Hahah Still have to wait until 4th week July, Indonesian Intel distributor is so slow...maaaaan I want to try binning some DCs, no matter how junk that was Quote
suzuki Posted June 29, 2014 Posted June 29, 2014 I hope so,to get my hands on a 5.5-5.6 chip on water,just imagine that . Quote
nedernakker Posted June 29, 2014 Posted June 29, 2014 I hope so,to get my hands on a 5.5-5.6 chip on water,just imagine that . I think you can forget about that.. water is not going to take you there.. Quote
suzuki Posted June 29, 2014 Posted June 29, 2014 On computex it was one stable at 5.5 ghz....also they are some rare ivy that can do that as well,craazy85 has one.(5.6+). Farjam had 4770k which was able to bench 5250 at 1.34v on air...so with cold water everything is possible. Never say never. Quote
Splave Posted June 29, 2014 Posted June 29, 2014 Computex on air, meant pouring ln2 into a foam cooler around the motherboard that has pots on it then closing the lid. Fails information but made Intel look good 1 Quote
Crew Vivi Posted June 29, 2014 Author Crew Posted June 29, 2014 (edited) thanks for the details guys! updated OT so far no scaling batches. i dont want to sound pessimistic but i dont think we will find one. ever since L318Bxx 4770K there has been no recorded scaling batch after that... so if it was going down hill after week 18 from last year you can imagine how terrible it is now mikecdm and steponz recorded -105 cb. so i have a feeling maybe the silicone is actually OK from the cpu side of things but the imc /vrm is whats getting worse on cold and killing the scaling quality Edited June 29, 2014 by Vivi Quote
Splave Posted June 30, 2014 Posted June 30, 2014 Maybe it's something else entirely, too soon to say for sure but I think I'm on to something. Quote
Massman Posted June 30, 2014 Posted June 30, 2014 On computex it was one stable at 5.5 ghz....also they are some rare ivy that can do that as well,craazy85 has one.(5.6+). Farjam had 4770k which was able to bench 5250 at 1.34v on air...so with cold water everything is possible. Never say never. Computex had 5.5g validation (even on simple AIO by amateur) and 4.9 Cinebench. There was no 5.5g stable. Quote
sabishiihito Posted June 30, 2014 Posted June 30, 2014 (edited) Still going. It seems none of my BBSE will do over 2400 anymore, so I may have to try some PSC. This is batch L331C501 from Micro Center., Edited July 1, 2014 by sabishiihito Quote
Splave Posted June 30, 2014 Posted June 30, 2014 seems this is "scaling" All on h80i water cooler can boot xp 5.3ghz 1.55v, see if anyone else can figure it out :D Quote
sabishiihito Posted June 30, 2014 Posted June 30, 2014 Wow how much ring bus voltage do you need for 4.5GHz uncore? Quote
Mikecdm Posted June 30, 2014 Posted June 30, 2014 Tested L329C241 today. 1.325v 5ghz 32m 4c/8t cb -140 benchable 6.2ghz 32m. 6.3ghz won't happen with any amount of volts. http://valid.canardpc.com/v5cyvf Quote
andressergio Posted June 30, 2014 Posted June 30, 2014 Tested L329C241 today. 1.325v 5ghz 32m 4c/8t cb -140 benchable 6.2ghz 32m. 6.3ghz won't happen with any amount of volts. http://valid.canardpc.com/v5cyvf very good mike a seller offered me that batch today but maybe not the same OC you tried only one chip ? best regards Sergio Quote
Mikecdm Posted June 30, 2014 Posted June 30, 2014 So far just one from that batch and one for L418C169. Still have another L418 to test on cold. Quote
andressergio Posted June 30, 2014 Posted June 30, 2014 So far just one from that batch and one for L418C169. Still have another L418 to test on cold. Nice mike that 5GHz HT was on water ? with L329C241 ??? that is the one i was offered Thanks ! Sergio Quote
Mikecdm Posted June 30, 2014 Posted June 30, 2014 Thats booting into xp with it and running 32m. Not sure how stable it is in w7 or running anything else. Quote
Crew Vivi Posted June 30, 2014 Author Crew Posted June 30, 2014 @ allen! ok so must be some IO IOD or crazy vinput or crazy little vinput?? Quote
SniperOZ Posted June 30, 2014 Posted June 30, 2014 first retail test...... 5G 4c/4t 1.272v Batch L419B533 Quote
Crew Vivi Posted June 30, 2014 Author Crew Posted June 30, 2014 thanks sniper and mike! mike seems that has some mild scaling to it, not bad. still 150mhz or so behind great scaling but its some hope, just wish it was a newer batch Quote
Administrators websmile Posted June 30, 2014 Administrators Posted June 30, 2014 I see mucho win for Intel, as people bought their cpus 1 Quote
SniperOZ Posted June 30, 2014 Posted June 30, 2014 quick LN2 update 6.4Ghz 32m 4c/4t 1.93v....CB -130C ..... this kept scaling with volts and cold.... and needed to be kept between -129 and -127C for this clock...............also (6.3Ghz 1.88v -124 ) (6.2Ghz 1.8v -124C)... to much volts, this chip may not survive first retail test...... 5G 4c/4t 1.272v Batch L419B533 1 Quote
Crew Vivi Posted June 30, 2014 Author Crew Posted June 30, 2014 ooooh great Data sniper!! ok guys, go fo L419B533! need a low V chip Quote
Gunslinger Posted June 30, 2014 Posted June 30, 2014 I'm done with 47XX, going to focus on the Pentiums, much less hurt to the wallet. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.