Not delidded, try to do it this week and pick up some LN2 to the weekend.

Have fun mate!

6600K L519B796 VID 1.176v, it' s good ?

L519B again......seems good, very good vid;)

some phase with dried GC delid.. kryonaut is gonna be nice...

 

http://hwbot.org/submission/2971688_random_xtu_core_i7_6700k_1637_marks?recalculate=true

 

6700k, batch L526B394 5.2ghz with 5g cache @ 1.505v on vcore peak dmm on SS 1.24 VID

 

 

water 1.411v core 1.2VID everything stable

6600K L521B643 VID 1.152v

boot at 5G 1.376v

 

Edited September 8, 20159 yr by splmann

...nice VID...I hope also mine scale with cold...

6700K L520B669 VID 1.296v

not able to boot 5G 1.50v

L520C033 VID 1.36

4200 needed 1.2V

4600 worked at def volts (1.38 in CpuZ)

4700 1,42V

Sold it, tried my luck with another

 

L526B243 VID 1,294

4700 at 1.376V

not delidded, air cooled, Ninja 4

Boots Windows at 4800 same volts, but can't get stable tried up to 1,43V (and temps hit 90)

6600K retail, L524B329

5ghz SPi 32m Win7 X64 SP1 1,37v(BIOS 1,35v) on Asus Maximus VIII Hero, vid 1,152v - not bad for first try, air cooling (Megahalems vintage 2009 ) non delidded

bclk readout is weird, I have 4995-5005

Can somebody please give me an un-tweaked spi32M run , on Win7-64bit with a 6600k @4600 ?

Just wondering what is the highest and lowest # numbers you guys have seen on a Mosin Nagant?

L524B663 shit shit shit shit shit cpu 1.4V VID ,how is this possible,fails 4700 cinebench 1.425

Wow that is high VID Alex,not sure how that is possible,you seemed to get all the nice chips ahah

 

 

I guess you can't sell that one fast enough

L524B663 bunnyextraction bunnyextraction bunnyextraction bunnyextraction bunnyextraction cpu 1.4V VID ,how is this possible,fails 4700 cinebench 1.425

that looks very miserable, but the only important thing is, if it is stable at 4,6 GHz even in some hardcore stability test as avx2 y-cruncher boot at 5 GHz is cool, even cinebench at 4,8 GHz or something like this, but if it is not 101% stable, it´s pointless and only for table comparison

if this one can´t run avx2 test at 4,6 GHz, then it finally sux, but give it a try gl

that looks very miserable, but the only important thing is, if it is stable at 4,6 GHz even in some hardcore stability test as avx2 y-cruncher boot at 5 GHz is cool, even cinebench at 4,8 GHz or something like this, but if it is not 101% stable, it´s pointless and only for table comparison

if this one can´t run avx2 test at 4,6 GHz, then it finally sux, but give it a try gl

You might be on the wrong forum.

lol

6600k , retail

L520B990

vid: 1.184

 

4.7Ghz Cinebench R15 stable

http://hwbot.org/submission/2974663_

 

1.43 Vcore (bios).

 

Air-cooled on Prolimatech Megahalems

30C ambient

 

On Asus Z170P-D3 (DDR3 board)

6700K - L527B622 - VID 1.296 No-Delid Chilled Water ( 5*c Idle)

44/44 @1.24v

46/44 @1.26v

47/45 @1.3v

48/45 @1.365

49/48 @ 1.45v XTU stable - http://hwbot.org/submission/2976438_

5g not happening under 1.5v without dropping uncore below 300mhz offset

Going to retest on water after delidding, before I freezing it.

Edited September 13, 20159 yr by hotrod717

Can somebody please give me an un-tweaked spi32M run , on Win7-64bit with a 6600k @4600 ?

 

Anybody ?

Will give it a try^^

6700K - L527B204 - 1.312v VID on Maximus VIII Hero (review board)

 

4.7 GHz core / 4.6 GHz cache XTU @ 1.4v

4.5 GHz core / 4.5 GHz cache XTU @1.225v

 

I've not tried for max boots or anything else.

No tweaks

No tweaks

 

Thanks

 

I wanted a completely default bench-run.

 

To kind of compare ddr3 vs ddr4

 

Default ddr3 is 1333c9^^ - my mems run at 1,35v, which is default like 1,65v for ddr3, I think it is comparable this way