Administrators websmile Posted December 31, 2016 Administrators Posted December 31, 2016 7.30 works with KBL Quote
Sparks.nl Posted January 1, 2017 Posted January 1, 2017 And seems tonrun fine on my ocf and m ocf. Quote
aerotracks Posted January 17, 2017 Posted January 17, 2017 Some 2T fun with Corsair 3200C14 B-Die on big yellow board Quote
GtiJason Posted January 18, 2017 Posted January 18, 2017 Some 2T fun with Corsair 3200C14 B-Die on big yellow board Okay, I now see why you let the ddr3 kit go. I've been drooling over these Dom P's myself for a while now, looking forward to 1t results in the near future ! . Quote
Administrators websmile Posted January 18, 2017 Administrators Posted January 18, 2017 Can´t afford these beauties :'( well, some cheap lpx do the job as well Quote
rtsurfer Posted January 18, 2017 Posted January 18, 2017 ^^^^ My thoughts exactly. Sent from my Nexus 5X using Tapatalk Quote
aerotracks Posted January 18, 2017 Posted January 18, 2017 Can´t afford these beauties :'( well, some cheap lpx do the job as well Judging from current retail prices difference is quite huge, it takes 8 whole Euros from "Cheap" LPX to "Special Edition" Platinum Quote
Administrators websmile Posted January 18, 2017 Administrators Posted January 18, 2017 These are 3600c16, I paid 110 less than cheapest Dominator offer^^ - my wallet thanked me for this Quote
aerotracks Posted January 18, 2017 Posted January 18, 2017 Good decision, I tested 2 quad sets 3600C16 Platinum, of which 0/8 sticks 2000C12 copy waza capable. Quote
aerotracks Posted January 19, 2017 Posted January 19, 2017 looking forward to 1t results in the near future ! Not today - with MFR only 2T above 1666MHz mem clock, funny since I was able to run 3733C11 at 1T with this board on P1.70 BIOS Mems cooled by single stage, temp at DIMM readout -61 Quote
Guest Bullant Posted March 1, 2017 Posted March 1, 2017 Not today - with MFR only 2T above 1666MHz mem clock, funny since I was able to run 3733C11 at 1T with this board on P1.70 BIOS Mems cooled by single stage, temp at DIMM readout -61 I missed this,nice work aero Quote
subaruwrc Posted March 9, 2017 Posted March 9, 2017 So I should use the black slots for better memory OC ? ( clock and stability ) Quote
I.nfraR.ed Posted March 9, 2017 Posted March 9, 2017 So I should use the black slots for better memory OC ? ( clock and stability ) Yes. Quote
Botvinnik Posted April 25, 2017 Posted April 25, 2017 I am looking for 24/7 efficiency and need some help. My OCF can't boot memory beyond 4200Mhz what can I do ? here are my setup i5-6500 Z170 big OCF bios 7.40 2x8GB TridentZ 3600 17-18-18-28 Actually it can't boot beyond 4060Mhz but after adjust all signal slope to 15-1 it can boot all the way to 4200Mhz (with hit and miss. I must set boot failure guard count to 10 to ensure that one out of ten will boot) but after 4200 it will stuck at 00 4C 19 looping no matter how much voltage / io / sa or timing. But if I boot at 4200 and raise BCLK in windows it can get to 4300Mhz but not stable. 4266 is best for benching but not stable enough for HCI memtest (small random error) what can I do ? Here is my 4266 running HCI 125%. Only one time it can do this. Boot again and it give random error. (io 1.3v sa 1.3v dram 1.45v it don't scale above this). Another thing is can anyone clarify me about how to properly adjust mb setting to get better signal like ODT , vref control , memory margin , dq0rt or whatever etc. Thanks in advance. Currently my best stable is 4133 17-17-17-28-350-2T 1.4V set , 4167 17-17-17-28-450-2T 1.45V set , 4200 17-18-18-28-350-2T 1.475V set HCI small random error but work fine for gaming. But 4266 even at 19-19-19-39 give random bsod. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.